The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours is __________ BTU/hr. (A) 100 (B) 200 (C) 1000 (D) 2000 C in 24 hours is __________ BTU/hr. (A) 100 (B) 200 (C) 1000 (D) 2000

The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours is __________ BTU/hr.
(A) 100
(B) 200
(C) 1000
(D) 2000
by

1 Answer

Answer :

(B) 200
by

Related questions

One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Description : One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at ... ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Last Answer : Ans: c

One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Last Answer : (C) 200 BTU/minute

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours

Description : One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours

Last Answer : Ans: c

One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Description : One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Last Answer : (C) 50 kJ/sec

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

What happens when the temperature of water falls from 30°C and 0°C? (a) The volume of ice formed will be less than volume of water (b) The volume of ice formed will be more than the volume of water (c) Water will not freeze at 0°C (d) None of the above

Description : What happens when the temperature of water falls from 30°C and 0°C? (a) The volume of ice formed will be less than volume of water (b) The volume of ice formed will be more than the volume of water (c) Water will not freeze at 0°C (d) None of the above

Last Answer : Ans:(b)

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Description : 1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Last Answer : (A) 1.49

Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated to decrease the risk of systemic bleeding. Which of the following true statement(s) concerning the use of thrombolytic agents for arterial occlusion is/are true? a. A standard technique involves infusing high-dose urokinase, 4000 units per minute for 1–2 hours, directly into the clot by a catheter embedded in the thrombus b. If progress is made, further fibrinolytic therapy is given at 1000 to 2000 units per minute until clot lysis has occurred c. The usual infusion time by the above-stated technique is usually in excess of 24 hours d. Successful clot lysis occurs more frequently in arterial graf

Description : Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated ... may be indicated for situations where complete clot evacuation cannot be accomplished surgically

Last Answer : Answer: a, b, e The most popular method for intraarterial thrombolytic therapy for arterial occlusion involves passing a guidewire through the thrombus with arteriographic guidance and ... acute arterial occlusion) or when distal vasculative is occluded and precludes appropriate inflow patency

The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Last Answer : d) kW / Ton of Refrigeration

Energy produced in the nuclear fission is of the order of __________ MeV. (A) 20 (B) 200 (C) 1000 (D) 2000

Description : Energy produced in the nuclear fission is of the order of __________ MeV. (A) 20 (B) 200 (C) 1000 (D) 2000

Last Answer : (B) 200

The earth's atmosphere is an envelope of gases present upto a height of about __________ kms. (A) 10 (B) 200 (C) 1000 (D) 2000

Description : The earth's atmosphere is an envelope of gases present upto a height of about __________ kms. (A) 10 (B) 200 (C) 1000 (D) 2000

Last Answer : (B) 200

The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Description : The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Last Answer : Answer : C

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Last Answer : (B) 2000

Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Description : Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Last Answer : (C) 1400

In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Description : In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Last Answer : (A) twisted pair, 100 metres

The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft

Description : The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft

Last Answer : (A) BTU/hr. ft 2°F

A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Description : A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Last Answer : (B) 4.88 kcal/hr. m. 2°C

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, the downstream 12 miles would then take only one hour less than the upstream 12 miles. What is the speed of the current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Description : A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, ... current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Last Answer : Answer-C Basic Formula: Speed of the stream = ½ (a-b) km/hr Explanation: Let the speed in still water be x m/hr Speed of stream be y m/hr Then, speed upstream = x-y m/hr and Speed downstream = x+y m/hr 12/x-y - ... 1] 3y^2 = 8 y so, y = 8/3 speed of the current = 8/3 m/hr = 2 (2/3) m/hr

TLV of ammonia, nitrogen dioxide and phenol vapor in air is __________ ppm. (A) 5 (B) 100 (C) 1000 (D) 2000

Description : TLV of ammonia, nitrogen dioxide and phenol vapor in air is __________ ppm. (A) 5 (B) 100 (C) 1000 (D) 2000

Last Answer : (A) 5

Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Description : Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Last Answer : (B) 20

Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range between (A) 100 to 250 (B) 250 to 500 (C) 500 to 750 (D) 750 to 1000

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Description : Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Last Answer : (A) Ton stock/hr/m2 hearth area

nergy Efficiency rating in BTU/hr/W is equal to a) 4.413 W/W b) 2.413 W/W c) 3.413 W/W

Description : Energy Efficiency rating in BTU/hr/W is equal to a) 4.413 W/W b) 2.413 W/W c) 3.413 W/W

Last Answer : 3.413w/w

The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.

Description : The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.

Last Answer : EER in BTU/hr/W = 3.413 EER in W/W.

EER in BTU/hr/W = a) 3.222 * EER in W/W c) 3.413 * EER in W/W b) 3.234 * EER in W/W d) 3.400 * EER in W/W

Description : EER in BTU/hr/W = a) 3.222 * EER in W/W c) 3.413 * EER in W/W b) 3.234 * EER in W/W d) 3.400 * EER in W/W

Last Answer : 3.413 * EER in W/W

We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V

Description : We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V

Last Answer : BTU/hr/W

EER in BTU/HR/W = ______ X EER in W/W A. 3.410 C. 3.411 B. 3.412 D. 3.413

Description : EER in BTU/HR/W = ______ X EER in W/W A. 3.410 C. 3.411 B. 3.412 D. 3.413

Last Answer : 3.413

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : 250-350 genes

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : .250-350 genes

What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Description : What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Last Answer : 250-350 genes

Pressure required to increase the density of water by about 1% is __________ atmosphere. (A) 10 (B) 50 (C) 200 (D) 1000

Description : Pressure required to increase the density of water by about 1% is __________ atmosphere. (A) 10 (B) 50 (C) 200 (D) 1000

Last Answer : (C) 200

Lakes freeze in cold countries in winter, leaving the water underneath at – (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Description : Lakes freeze in cold countries in winter, leaving the water underneath at – (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Last Answer : (3) 4°C Explanation: Lake ice cover is seasonal and occurs where average daily temperature is below the freezing point. Once formed the lake ice thickens over the course of the winter as the temperature ... 0 (zero) degrees Celsius water at the surface and denser 4 degrees Celsius at the bottom.

Lakes freeze in cold countries in winter, leaving the water underneath at (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Description : Lakes freeze in cold countries in winter, leaving the water underneath at (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Last Answer : 4°C

The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Description : The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Last Answer : (C) 18 kWh/ton

In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Last Answer : (C) 1000-10000

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

Approximately how many eggs does a female silkworm lay in 24 hours after the proper copulation with the male moth in India ? (A) 200(B) 1200 (C) 100 (D) 400 (E) None of these

Description : Approximately how many eggs does a female silkworm lay in 24 hours after the proper copulation with the male moth in India ? (A) 200(B) 1200 (C) 100 (D) 400 (E) None of these

Last Answer : (B) 1200

A truck of mass 5 ton is travelling on a horizontal road with 36 km hr^-1 stops on travelling 1 km after its engine fails suddenly.

Description : A truck of mass 5 ton is travelling on a horizontal road with 36 km hr^-1 stops on travelling 1 km after its engine fails suddenly.

Last Answer : A truck of mass 5 ton is travelling on a horizontal road with 36 km hr-1 stops on travelling ... similar distance same how much will the fraction be?

I am wondering if Frigidaire FAX054P7A 5000 BTU Window Air Conditioner will be sufficient for my 15 Ft by 10 Ft (total bedroom area 150 square feet) bedroom as far as adequate cooling is concerned?

Description : I am wondering if Frigidaire FAX054P7A 5000 BTU Window Air Conditioner will be sufficient for my 15 Ft by 10 Ft (total bedroom area 150 square feet) bedroom as far as adequate cooling is concerned?

Last Answer : The Frigidaire FAX054P7A is designed to cool a room up to 150 square feet, so your bedroom size is just at the limit of it's capacity. Assuming you aren't someone who gets exceptionally hot, this unit should work fine.

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heating value around 13, 200 BTU/1b