Description : The ______ layer is responsible for the movementof a signal from its optical source to its optical destination. A) section B) line C) path D) photonic
Last Answer : line
Description : The ____layer is responsible for the movement ofa signal across aphysical line. A) section B) line C) path D) photonic
Last Answer : section
Description : The _______ layer corresponds to thephysical layer of the OSI model. A) section B) line C) path D) photonic
Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned
Last Answer : d. all of the mentioned
Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned
Last Answer : D. all of the mentioned
Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned
Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned
Last Answer : d) all of the mentioned
Description : The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned
Description : The physical layer translates logical communication requests from the ______ into hardware specific operations. a. data link layer b. network layer c. trasnport layer d. application layer
Last Answer : a. data link layer
Description : A ______is the end-to-end portion of the network between two STS multiplexers. A) section B) line C) path D) none of the above
Last Answer : path
Description : A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above
Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport
Last Answer : physical
Description : A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c
Last Answer : C. cross talk
Description : Which of the following routing algorithms can be used for network layer design? a. shortest path algorithm b. distance vector routing c. link state routing d. all of the mentioned
Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : DSSS
Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission
Last Answer : a. End system
Description : Which of the following layer protocols are responsible for user and theapplicationprogrammesupport such aspasswords, resource sharing, file transfer and network management? A. Layer 7 protocols B. Layer 6 protocols C. Layer 5 protocols D. Layer 4 protocols E. None of the above
Last Answer : Layer 7 protocols
Description : Which of the following layers of the OSI model is responsible for user interaction? a.Layer 4 b.Layer 5 c.Layer 6 d.Layer 7
Last Answer : d.Layer 7
Description : In OSI model, session layer is responsible for a. Recovery b. Check pointing c. Both a and b d. None of the above
Last Answer : c. Both a and b
Description : Which layer is responsible for process to process delivery in a general network model? a) network layer b) transport layer c) session layer d) data link layer
Last Answer : b) transport layer
Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above
Last Answer : four
Description : An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer
Last Answer : two-layer
Description : Sometimes, Session layer is also called ______ layer a. Virtual layer b. Port layer c. Segmentation layer d. Process layer
Last Answer : b. Port layer
Description : One of the responsibilities of the transport layer protocol is to create a ______ communication. A. host-to-host B. process-to-process C. node-to-node D. none of the above
Last Answer : B. process-to-process
Description : The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight ... is only considered. The reluctance of iron paths is assumed as zero (d) All of the above
Last Answer : (d) All of the above
Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above
Last Answer : ATM
Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : thedestination IP address in the datagram header
Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : the IP address of therouter found inthe routing table
Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : hedestination IP address in the datagram header
Description : ______ refers to the physical or logicalarrangement of a network. A) Data flow B) Mode ofoperation C) Topology D) None of the above
Last Answer : Topology
Description : The ability of a single network to span multiple physical networks is known as ______ a. Subnetting b. Masking c. Fragmenting d. Hopping
Last Answer : a. Subnetting
Description : Layer one of the OSI model is a. physical layer b. link layer c. transport layer d. network layer e. none of above
Last Answer : physical layer
Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above
Last Answer : preamble
Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above
Last Answer : data link
Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove
Description : Transmission media lie below the_______ layer. A) physical B) network C) transport D) application
Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above
Description : In ATM, the _______layeraccepts transmissions from upper-layer servicesand maps them into ATM cells. A) physical B) ATM C) AAL D) none of the above
Last Answer : AAL
Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers
Last Answer : the physical and data link layers
Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above
Last Answer : network
Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above
Last Answer : physical and data link
Description : The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation
Last Answer : A) Physical
Description : The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer
Last Answer : A) Physical layer
Description : The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation
Description : Which layer provides the services to user? a.application layer b.session layer c.presentation layer d.physical layer
Last Answer : a.application layer
Description : The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application
Last Answer : d.application
Description : What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above
Last Answer : a. Defines how data is formatted between the devices
Description : In OSI model, which of the following layer transforms information from machine format into that understandable by user a. application b. session c. presentation d. physical
Last Answer : c. presentation
Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer
Last Answer : a. network layer