The ____layer is responsible for the movement ofa signal across aphysical line. A) section B) line C) path D) photonic

The ____layer is responsible for the movement ofa signal across aphysical line.
A)
section
B)
line
C)
path
D)
photonic
by

1 Answer

Answer :

section
by

Related questions

The ______ layer is responsible for the movementof a signal across a physical section. A) section B) line C) path D) photonic

Description : The ______ layer is responsible for the movementof a signal across a physical section. A) section B) line C) path D) photonic

Last Answer : section

The ______ layer is responsible for the movementof a signal from its optical source to its optical destination. A) section B) line C) path D) photonic

Description : The ______ layer is responsible for the movementof a signal from its optical source to its optical destination. A) section B) line C) path D) photonic

Last Answer : line

The _______ layer corresponds to thephysical layer of the OSI model. A) section B) line C) path D) photonic

Description : The _______ layer corresponds to thephysical layer of the OSI model. A) section B) line C) path D) photonic

Last Answer : section

The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram headerB)the IP address of therouter found inthe routing tableC)either a or bD)noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram header ... address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Description : The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Last Answer : twice thehighest frequencyof a signal

What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above

Description : What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above

Last Answer : 3 MHz

Inthe _______method, after thestation finds the line idle it sends or refrainfrom sending based on the outcome ofa random number generator. If the line is busy, it tries againA)nonpersistentB)1-persistentC)p-persistentD)none of the above

Description : Inthe _______method, after thestation finds the line idle it sends or refrainfrom sending based on the outcome ofa random number generator. If the line is busy, it tries again A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : p-persistent

A ______is the end-to-end portion of the network between two STS multiplexers. A) section B) line C) path D) none of the aboveC

Description : A ______is the end-to-end portion of the network between two STS multiplexers. A) section B) line C) path D) none of the above

Last Answer : path

A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above

Description : A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above

Last Answer : line

The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Description : The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Last Answer : destination

_________ media transportelectromagnetic waves without the use ofa physical conductor. A) Guided B) Unguided C) Either (a) or (b) D) None of the above

Description : _________ media transportelectromagnetic waves without the use ofa physical conductor. A) Guided B) Unguided C) Either (a) or (b) D) None of the above

Last Answer : Unguided

______ cables arecomposed ofa glass or plastic inner core surrounded by cladding, allencasedin an outside jacket. A) CoaxiaB) Fiber-optic C) Twisted-pair D) none of the abovel

Description : ______ cables arecomposed ofa glass or plastic inner core surrounded by cladding, allencasedin an outside jacket. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above

Last Answer : Fiber-optic

_____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Description : In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Last Answer : hoplimit

A DVD is an example ofa(n) – (A) hard disk (B) opticaldisc (C) output device (D) solid-state storage device (E) None of these

Description : A DVD is an example ofa(n) – (A) hard disk (B) opticaldisc (C) output device (D) solid-state storage device (E) None of these

Last Answer : opticaldisc

The basic unit ofa worksheet into which you enter data in Excel is called a– (A) tab (B) cell (C) box (D) range (E) None of these

Description : The basic unit ofa worksheet into which you enter data in Excel is called a– (A) tab (B) cell (C) box (D) range (E) None of these

Last Answer : cell

To instruct Wordto fit the width ofa column to the contents ofa table automatically, click the button and then point to AutoFit Contents. (A) Fit to Form (B) Format (C) Autosize (D) Contents (E) AutoFit

Description : To instruct Wordto fit the width ofa column to the contents ofa table automatically, click the button and then point to AutoFit Contents. (A) Fit to Form (B) Format (C) Autosize (D) Contents (E) AutoFit

Last Answer : AutoFit

In mesh topology, every device has a dedicated topology ofa. Point to point linking b. Both a and b c. Multipoint linking d. None of given

Description : In mesh topology, every device has a dedicated topology of a. Point to point linking b. Both a and b c. Multipoint linking d. None of given

Last Answer : a. Point to point linking

A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Description : A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Last Answer : C. cross talk

The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight across the slot and around the iron at the bottom (c) The permanence of air paths is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Description : The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight ... is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Last Answer : (d) All of the above

For complete protection ofa 3-phase line:

Description : For complete protection ofa 3— phase line: (1) Three phase and three—earth fault relays are required (2) Three phase and two—earth fault relays are required (3) Two phase and two—earth fault relays are required (4) Two phase and one-earth fault relays are required

Last Answer : For complete protection ofa 3— phase line: Two phase and one-earth fault relays are required

Indecodinga digital signal, the receiver calculates a running average of thereceived signal power, called the _______. A) baseline B) base C) line D) none of the above

Description : Indecodinga digital signal, the receiver calculates a running average of thereceived signal power, called the _______. A) baseline B) base C) line D) none of the above

Last Answer : baseline

________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : ________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Line coding

Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors will be undetected whenan error detection scheme is used C. the probability thatone or more errors will bedetected when anerror detection mechanism is used D. signal tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cablesB. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned

Description : The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned

Last Answer : d) all of the mentioned

In an optical fibre the signal is transmitted – (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Description : In an optical fibre the signal is transmitted – (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Last Answer : (3) due to total internal reflection Explanation: Total internal reflection is the basic concept be-hind the optical fiber. Optical fiber employs the transmission of light down fibers of plastic ... refractive index to allow more light to be guided along the fiber through total internal refraction.

In an optical fibre the signal is transmitted (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Description : In an optical fibre the signal is transmitted (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Last Answer :  due to total internal reflection

A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Description : A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Last Answer : (A) Fixed in space in steady flow

..... is a black box testing method ? Boundary value analysisBasic path testing Code path analysis None of above

Description : ..... is a black box testing method ? Boundary value analysis Basic path testing Code path analysis None of above

Last Answer : Boundary value analysis

White box testing, a software testing technique is sometimes called ? Basic path Graph Testing Dataflow Glass box testing

Description : White box testing, a software testing technique is sometimes called ? Basic path Graph Testing Dataflow Glass box testing

Last Answer : Glass box testing

White box testing, a software testing technique is sometimes called ? Basic path Graph Testing Dataflow Glass box testing

Description : White box testing, a software testing technique is sometimes called ? Basic path Graph Testing Dataflow Glass box testing

Last Answer : Glass box testing

A ________ switch combines crossbar switches inseveral (normally three) stages. A) multistage B) multiple crossbar C) multiple path D) none of the above

Description : A ________ switch combines crossbar switches inseveral (normally three) stages. A) multistage B) multiple crossbar C) multiple path D) none of the above

Last Answer : multistag

In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Last Answer : greater than

In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Description : In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Last Answer : flow label

RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above

Description : RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

In the _______ treeapproach, each router needs tohave oneshortest path tree for each group. A) group-shared B) source-based C) a or b D) none of the above

Description : In the _______ treeapproach, each router needs tohave oneshortest path tree for each group. A) group-shared B) source-based C) a or b D) none of the above

Last Answer : source-based

In multicast routing, eachinvolvedrouter needs toconstructa ________ path tree for each group. A) average B) longest C) shortest D) none of the above

Description : In multicast routing, eachinvolvedrouter needs toconstructa ________ path tree for each group. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above

Description : In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

________ is an interdomain routingprotocol using path vector routing. A) BGP B) RIP C) OSPF D) none of the above

Description : ________ is an interdomain routingprotocol using path vector routing. A) BGP B) RIP C) OSPF D) none of the above

Last Answer : BGP

In ________ routing, we assume that there is one node (or more) ineach autonomous system that acts on behalf of the entire autonomous system. A) distant vector B) path vector C) link state D) none of the above

Description : In ________ routing, we assume that there is one node (or more) ineach autonomous system that acts on behalf of the entire autonomous system. A) distant vector B) path vector C) link state D) none of the above

Last Answer : path vector

The Open Shortest Path First (OSPF)protocol is an intradomain routing protocolbased on _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Open Shortest Path First (OSPF)protocol is an intradomain routing protocolbased on _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The _________ routing uses the Dijkstra algorithm to build aroutingtable. A) distancevector B) link state C) path vector D) none of the above

Description : The _________ routing uses the Dijkstra algorithm to build aroutingtable. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The Routing Information Protocol (RIP) is an intradomain routing based on _________ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Routing Information Protocol (RIP) is an intradomain routing based on _________ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : distancevector

In ________, eachnode maintains avector (table)of minimum distances to every node. A) path vector B) distancevector C) link state D) none of the above

Description : In ________, eachnode maintains avector (table)of minimum distances to every node. A) path vector B) distancevector C) link state D) none of the above

Last Answer : distancevector