There arethree sampling methods: __________. A) quantized, sampled, and ideal B) ideal, sampled, andflat-top C) ideal, natural, and flat-top D) none of the above

There arethree sampling methods: __________.
A)
quantized, sampled, and ideal
B)
ideal, sampled, andflat-top
C)
ideal, natural, and flat-top
D)
none of the above
by

1 Answer

Answer :

ideal, natural, and flat-top
by

Related questions

Explain flat top sampling with circuit diagram.Draw flat top sampled signal.

Description : Explain flat top sampling with circuit diagram.Draw flat top sampled signal.

Last Answer : Flat top sampling: In flat top sampling, the top of the samples remains constant and equal to the instantaneous value of the modulating signal at the start of the sampling. Thus the ... the sampled signal and the pulse signal. Flat top sampling is mostly used in digital transmission

The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Last Answer : b) PCM signal

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Description : 12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Last Answer : c. 768 kbps

The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Description : The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Last Answer : (A) 2fs

The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Last Answer : PCM

The first step in PCM is ________. A) quantization B) modulation C) sampling D) none of the above

Description : The first step in PCM is ________. A) quantization B) modulation C) sampling D) none of the above

Last Answer : sampling

Dried finished product sampled from various parts of a __________ dryer exhibits non-uniformity in the moisture content. (A) Rotary (B) Tray (C) Freeze (D) None of these

Description : Dried finished product sampled from various parts of a __________ dryer exhibits non-uniformity in the moisture content. (A) Rotary (B) Tray (C) Freeze (D) None of these

Last Answer : (B) Tray

The element of the audit planning process most likely to be agreed upon with the client before implementation of the audit strategy is the determination of the a. Methods of statistical sampling to be used in confirming accounts receivable. b. Pending legal matters to be included in the inquiry of the client's attorney. c. Evidence to be gathered to provide a sufficient basis for the auditor's opinion. d. Schedules and analyses to be prepared by the client's staf

Description : The element of the audit planning process most likely to be agreed upon with the client before implementation of the audit strategy is the determination of the a. Methods of statistical sampling to be used ... for the auditor's opinion. d. Schedules and analyses to be prepared by the client's staf

Last Answer : Schedules and analyses to be prepared by the client's staf

Which of the following sampling methods is the best way to select a group of people for a study if you are interested in making statements about the larger population? a. Convenience sampling b. Quota sampling c. Purposive sampling d. Random sampling

Description : Which of the following sampling methods is the best way to select a group of people for a study if you are interested in making statements about the larger population? a. Convenience sampling b. Quota sampling c. Purposive sampling d. Random sampling

Last Answer : d. Random sampling

Which of the following sampling methods is not based on probability? (A) Simple Random Sampling (B) Stratified Sampling (C) Quota Sampling (D) Cluster Sampling

Description : Which of the following sampling methods is not based on probability? (A) Simple Random Sampling (B) Stratified Sampling (C) Quota Sampling (D) Cluster Sampling

Last Answer : (C) Quota Sampling

Which of the following sampling methods is based on probability? (A) Convenience sampling (B) Quota sampling (C) Judgement sampling (D) Stratified sampling

Description : Which of the following sampling methods is based on probability? (A) Convenience sampling (B) Quota sampling (C) Judgement sampling (D) Stratified sampling

Last Answer : (D) Stratified sampling

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

The quantized Bohr orbit radius of electron in hydrogen atom is given by a) n2 r3 b) nr1 c) n2 r2 d) n2 r1

Description : The quantized Bohr orbit radius of electron in hydrogen atom is given by a) n2 r3 b) nr1 c) n2 r2 d) n2 r1

Last Answer : d) n2 r1

The value of first quantized Bohr orbit radius of hydrogen atom is a) 0.0053 nm b) 5.3 nm c) 0.053 nm d) 0.053 cm

Description : The value of first quantized Bohr orbit radius of hydrogen atom is a) 0.0053 nm b) 5.3 nm c) 0.053 nm d) 0.053 cm

Last Answer : c) 0.053 nm

The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2

Description : The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2

Last Answer : a) l=log(to the base 2)L

The Millikan experiment showed that electric charge was: w) negative x) quantized y) positive z) unmeasurable

Description : The Millikan experiment showed that electric charge was: w) negative x) quantized y) positive z) unmeasurable

Last Answer : ANSWER: X -- QUANTIZED

When a physical property such as charge exists in discrete "packets" rather than in continuous amounts, the property is said to be: w) discontinuous x) abrupt y) quantized z) noncontinuous

Description : When a physical property such as charge exists in discrete "packets" rather than in continuous amounts, the property is said to be: w) discontinuous x) abrupt y) quantized z) noncontinuous

Last Answer : ANSWER: Y -- QUANTIZED

Have you purchased and sampled any really good buckets of food for a disaster?

Description : Have you purchased and sampled any really good buckets of food for a disaster?

Last Answer : I didn’t even know there was such a thing as a survival food bucket.

There is such a thing as "Rattlesnake Chili." Have you ever sampled it? What does it taste like, and how can I get some? It isn't sold locally where I live.

Description : There is such a thing as "Rattlesnake Chili." Have you ever sampled it? What does it taste like, and how can I get some? It isn't sold locally where I live.

Last Answer : Don’t try it Trust me…

Have you ever tried/sampled/tasted SARSPARILLA?

Description : Have you ever tried/sampled/tasted SARSPARILLA?

Last Answer : it tastes like dandelion and burdock. Or for you in the US sort of like Dr Pepper. Sort of.

Value of sampled signal is used to produce a A. binary number B. decimal number C. octal number D. all of above

Description : Value of sampled signal is used to produce a A. binary number B. decimal number C. octal number D. all of above

Last Answer : binary number

If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Description : If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Last Answer : 28. 50.

To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Description : To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Last Answer : 2.5 times the highest modulating frequency.

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

In PCM, it converts the PAM sampled to parallel PCM codes

Description : In PCM, it converts the PAM sampled to parallel PCM codes

Last Answer : Analog-to-Digital converter

If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be

Description :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be A) Large in amplitude B) Small in amplitude C) Distorted D) Distortion less

Last Answer :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be Distorted 

The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt

Description : The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is: (1) 500 Hz (2) 700 Hz (3) 300 Hz (4) 1400 Hz 

Last Answer : The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is: 300 Hz

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

In qualitative research paradigm, which of the following features may be considered critical? (A) Data collection with standardised research tools. (B) Sampling design with probability sample techniques. (C) Data collection with bottom-up empirical evidences. (D) Data gathering to take with top-down systematic evidences.

Description : In qualitative research paradigm, which of the following features may be considered critical? (A) Data collection with standardised research tools. (B) Sampling design with probability sample techniques ... evidences. (D) Data gathering to take with top-down systematic evidences.

Last Answer : (C) Data collection with bottom-up empirical evidences.

Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Description : Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Last Answer : A. Folding frequency

Sampling technique that when the tops of the sample pulses retain their natural shape during the sample interva

Description : Sampling technique that when the tops of the sample pulses retain their natural shape during the sample interva

Last Answer : natural sampling

Describe natural sampling with neat sketch.

Description : Describe natural sampling with neat sketch.

Last Answer : 1. Natural Sampling or Chopper Sampling Natural Sampling is a practical method of sampling in which pulse have finite width equal to T. Sampling is done in accordance with the carrier signal which is ... ). Spectrum of Natural Sampled Signal is given by:  Natural Sampled Waveform

It is more accurate to define a _____ as a variety of different recordtypes that aretreated as asingle unit A. Database B. Table C. Record D. Flat File E. None of the above

Description : It is more accurate to define a _____ as a variety of different recordtypes that aretreated as asingle unit A. Database B. Table C. Record D. Flat File E. None of the above

Last Answer : Database

A name in the _______ name space is a sequence of characters without structure A. address B. DomanC. Flat D. Both a and b

Description : A name in the _______ name space is a sequence of characters without structure A. address B. Doman C. Flat D. Both a and b

Last Answer : C. Flat

The two basic types of record-access methods are a. Sequential and random b. Sequential and indexed c. Direct and immediate d. On-line and real time

Description : The two basic types of record-access methods are a. Sequential and random b. Sequential and indexed c. Direct and immediate d. On-line and real time

Last Answer : Sequential and random

We discussed ______ popular controlled-access methods. A) two B) threeC)fourD)none of the above

Description : We discussed ______ popular controlled-access methods. A) two B) three C) four D) none of the above

Last Answer : three

In _______ methods,a stationcannot send unless it hasbeen authorized byother stations. A) random access B) controlledaccess C) channelization D) none of the above

Description : In _______ methods,a stationcannot send unless it hasbeen authorized byother stations. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : controlledaccess

In _______ methods, the stations consult one another tofind which station has the right to send. A) random access B) controlledaccess C) channelization D) none of the above

Description : In _______ methods, the stations consult one another tofind which station has the right to send. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : controlledaccess

In ___________ methods, no station is superior to another station and none is assigned the controlover another. A) random access B) controlledaccess C) channelization D) none of the above

Description : In ___________ methods, no station is superior to another station and none is assigned the controlover another. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : random access

We have categorizedaccess methods into _______ groups. A) two B) three C) four D) five

Description : We have categorizedaccess methods into _______ groups. A) two B) three C) four D) five

Last Answer : three

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Traditionally, _____ methods of switching have been important. A) four B) three C) five D) six

Description : Traditionally, _____ methods of switching have been important. A) four B) three C) five D) six

Last Answer : three

Which of the following encoding methods does not provide for synchronizationA)NRZ-LB)RZC)NRZ-ID)Manchester?

Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester

Last Answer : NRZ-L

Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Description : Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Last Answer : (A) Of real fluids

What ingredients and methods of food preparation are ideal in cooking for a low glucose diet?

Description : What ingredients and methods of food preparation are ideal in cooking for a low glucose diet?

Last Answer : You should look at food that are on the glycemic index. The index rates carbohydrates based on their effect on blood glucose levels. You should try to incorporate foods that are low on the index into your diet. Here is the website for the glycemic index: http://www.glycemicindex.com/

Which of the following terms applies toall the webpages for Amazon.com? A) Top-leveldomain B) Web site C) Web siteaddress D) Web domain

Description : Which of the following terms applies toall the webpages for Amazon.com? A) Top-leveldomain B) Web site C) Web siteaddress D) Web domain

Last Answer : Web site

State whether the following statements are true / false: 1) A fully qualified domain name starts with a specific host and ends with a top-level domain. 2) Domain names are always written as fully qualified domain names. A. 1.T, 2.T B. 1.T, 2.F C. 1.F, 2.T D. 1.F, 2.F

Description : State whether the following statements are true / false: 1) A fully qualified domain name starts with a specific host and ends with a top-level domain. 2) Domain names are always written as fully qualified domain names. A. 1.T, 2.T B. 1.T, 2.F C. 1.F, 2.T D. 1.F, 2.F

Last Answer : B. 1.T, 2.F

Do fast food resturaunts even have flat top grills anymore to fry their burgers on?

Description : Do fast food resturaunts even have flat top grills anymore to fry their burgers on?

Last Answer : Every one I’ve seen did/does.