Description : What synchronization is provided so that the start and end of message is identified? A. Carrier B. Character C. Bit D. Clock
Last Answer : B. Character
Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue
Last Answer : B. synchronous
Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : byte-oriented
Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : bit-oriented
Description : Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits
Last Answer : D. They have clock recovery circuits
Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem
Last Answer : B. X modem
Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem
Description : ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1
Last Answer : A. 83 B
Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true
Last Answer : D. 1.false, 2. true, 3. true
Description : Binary symmetric channel uses (A) Half duplex protocol (B) Full duplex protocol (C) Bit oriented protocol (D) None of the above
Last Answer : (A) Half duplex protocol
Description : ECE Board Exam March 1996 One character or a sequence of characters forming a part, or the whole of a message with a specific meaning A. Signs B. Call sign C. Code D. Identifier
Last Answer : C. Code
Description : Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character
Last Answer : A. agreed upon in advance between sender and receiver
Description : A seven-bit character can represent one of _________ possibilities. A. 14 B. 64 C. 128 D. 7
Last Answer : C. 128
Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode
Last Answer : D. Packet mode
Description : Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme
Last Answer : A. Synchronous data transfer scheme
Description : Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband
Last Answer : C. Baseband
Description : Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet
Last Answer : B. Asynchronous
Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment
Last Answer : B. Data communication equipment
Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.
Last Answer : C. The clocking is derived from the data in synchronous
Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different
Last Answer : B. the clocking is derived from the data in synchronous transmission
Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above
Last Answer : they contain clock recovery circuits
Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above
Description : The output of a JK flipflop with asynchronous preset and clear inputs is 1'. The output can be changed to 0' with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) ... (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.
Last Answer : Ans: C Preset state of JK Flip-Flop =1 With J=1 K=1 and the clock next state will be complement of the present state.
Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above
Last Answer : d. All the above
Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP
Last Answer : C. SLIP, PPP
Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true
Last Answer : D. 1. true, 2. false, 3. true
Description : Which of the following statements is incorrect for Parallel Virtual Machine (PVM)? (A) The PVM Communication model provides asynchronous blocking send, asynchronous blocking receive and non-blocking receive function. ... of such messages. (D) In PVM Model, the message order is not preserved.
Last Answer : (D) In PVM Model, the message order is not preserved.
Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above
Last Answer : asynchronous
Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200
Last Answer : b. 800
Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)
Last Answer : asynchronous serial
Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned
Last Answer : d. all of the mentioned
Description : Transmission control protocol ___________ a) is a connection-oriented protocol b) is a connectionless protocol c) is a protocol working on application layer d) all of the mentioned
Last Answer : a) is a connection-oriented protoco
Description : Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned
Last Answer : d) all of the mentioned
Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The anycast service is included in IPV6. A) True, True B) True, False
Last Answer : i) A connection oriented protocol can only use unicast addresses.
Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False
Last Answer : B) True, True
Description : UDP is a (1) connection oriented protocol (2) connectionless protocol (3) userdefined protocol (4) security protocol
Last Answer : connectionless protocol
Description : Explain connectionless and connection oriented protocol. Give the example for each type.
Last Answer : Connection less protocol: These protocols do not establish a connection between devices. It is manually achieved by transmitting information in one direction, from source to destination without checking to ... SMTP establish a TCP connection between Sender And port number 25 of receiver
Description : A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter
Last Answer : A. Gateway
Description : It is a protocol used to connect the other packet witching network A. X.25 B. X.50 C. X.10 D. X.75
Last Answer : D. X.75
Description : Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications
Last Answer : B. Isochronous
Description : What are the problems involved in an IP Fragmentation Process? A. Loss of any fragment results in rejection of all datagrams B. Management of buffer space is essential to handle reassembly process C. No necessity of initializing ... -oriented IP service a. A & B b. C & D c. B& C d. A & D
Last Answer : a. A & B
Description : . ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correction C. both a and b D. Confirm
Last Answer : B. Forward error correction
Description : What is another name for computers designed to be character-oriented or character-addressable?
Last Answer : Variable-word-length or byte-addressable.
Description : A measurement of -75 dBm, C-message weighted, would be _________ dBrnc. A. 8 B. 7 C. 9 D. 15
Last Answer : D. 15
Description : Interfering effect of noise, C message weighted, is _________. A. dBa B. dBm C. dBmc D. dB
Last Answer : C. dBmc
Description : An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling
Last Answer : D. Polling
Description : When one stations is designated as master and rest of the stations are considered slaves message handling is ________. A. polling B. WAN C. LAN D. OSI
Last Answer : A. polling
Description : The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique
Last Answer : C. determined by the sender and receiver
Description : Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these
Last Answer : D. All of these