What is the need of UPS?

What is the need of UPS?
by

1 Answer

Answer :

1) An Uninterruptible Power Supply (UPS) is used to protect critical loads from mains supply problems including spikes, voltage dips, fluctuations and complete power failures using a dedicated battery. 2)A UPS system can also be used as standby system when AC mains is failed.
by

Related questions

Why does the UPS tracking number need 30 digits?

Description : Why does the UPS tracking number need 30 digits?

Last Answer : here

When UPS or Fedex updates each step in tracking, are they scanning each individual package, or are they scanning the cargo container (only)?

Description : When UPS or Fedex updates each step in tracking, are they scanning each individual package, or are they scanning the cargo container (only)?

Last Answer : I wonder the same. I am waiting with you for an answer.

UPS and Fedex appear to have been totally overwhelmed with this year's deliveries. Who will benefit from their screwups?

Description : UPS and Fedex appear to have been totally overwhelmed with this year's deliveries. Who will benefit from their screwups?

Last Answer : Do you have a link regarding fedex and UPS not delivering as promised?

Does UPS drug test?

Description : Does UPS drug test?

Last Answer : I’m pretty sure they do.

What is a good reliable brand of UPS?

Description : What is a good reliable brand of UPS?

Last Answer : In one place you say UPSes…then, USP. What exactly are you looking for?

How do UPS trucks nagivate?

Description : How do UPS trucks nagivate?

Last Answer : I can’t answer your specific question. but here in the Los Angeles, UPS drivers have established routes.

Write short note on UPS and its usage in railway system.

Description : Write short note on UPS and its usage in railway system.

Last Answer : Ans. Ideally, the voltage supply by the utility system should be perfect sine wave without any harmonics, at its nominal frequency of 50 Hz and at its nominal magnitude. In practice however voltage can ... load from one source to the other results in the least amount of disturbance seen by the load.

UPS- How to give Connection?

Description : UPS- How to give Connection?

Last Answer : Ans. Means Uninterrupted power supply. To give UPS connection, first normal supply is kept off. Then, loads of essential and non essential are to be segregated. Essential loads are to be brought under single point of control. Then, UPS can be connected.

What is UPS how it works?

Description : What is UPS how it works?

Last Answer : UPS stands for Uninterrupted Power Supply. This system can be of two major types and work to ensure uninterruptible power within a specified period before backup comes in. There is a static ... type has the advantage of less maintenance when compared with the mechanical type with rotating parts.

Ham Roll Ups

Description : Ham Roll Ups

Last Answer : Ham Roll Ups - serves 10 3 (8 ounce) packages cream cheese, softened 3 tbsp horseradish 2 tbsp finely chopped onion 1 (8 ounce) container sour cream 2 pounds cooked ham, thinly sliced ... and sour cream. Spread the mixture onto the ham slices. Tightly roll the slices and secure with toothpicks.

Describe working of online UPS. List any two applications of UPS.

Description : Describe working of online UPS. List any two applications of UPS.

Last Answer : Online UPS: The block diagram of the on line UPS systems is as shown, where the load is connected to the invertor through the UPS static switch. The UPS static switch is ... 4) Healthcare: hospitals, clinics and retirement homes 5) Telecommunications 6) Special projects (events)

Explain the operation of UPS with a neat block diagram.

Description : Explain the operation of UPS with a neat block diagram.

Last Answer : Uninterruptible-Power-Supplies (UPS): A block diagram of UPS system is shown in figure. It essentially consists of four major components: i)Rectifier (or battery charger) ii) ... . Due to fast action requirement, transfer switch can be implemented by fast acting semiconductor devices.

Define transfer time and back up time of UPS.

Description : Define transfer time and back up time of UPS.

Last Answer : Transfer time of UPS: The transfer time, sometimes also called switchover time, is the amount of time the UPS will take to switch from utility to battery supply during a mains failure, or from battery to ... is the amount of time for which the UPS will supply the power to load during mains failure.

what is UPS ?

Description : what is UPS ?

Last Answer : UPS is Uninterrupted Power Source

what is UPS and what are its uses?

Description : what is UPS and what are its uses?

Last Answer : Ups means uninterrupted power supply It supplies power when there is power supply outage. This is done by storing power in battery banks while power is on and then during power outage the DC in battery is converted to a.c by inverters

Can I get some opinions? (Details inside)

Description : Can I get some opinions? (Details inside)

Last Answer : answer:Let UPS accuse your neighbor, just give the police the facts as best you know them. Don't say anything that is speculative on your part. If UPS or the Police have some way of determining ... power to them. But since you don't have proof, just speculation, stay out of inflaming the situation.

What do I do if I haven't received my order from Ebay?

Description : What do I do if I haven't received my order from Ebay?

Last Answer : answer:Contact the seller and your local UPS. Let both know the tracking is showing the package was delivered but that you have not rec'd the package. If this were me, I'd also open a case on ebay ... feedback click on More Actions , then Resolve a problem ...Then I didn't receive my item .

Can I revive these APC batteries?

Description : Can I revive these APC batteries?

Last Answer : answer:What is wrong with them? The best thing to do once a UPS battery quickly depletes, slow or no charge is replace them. Why risk it.

Define Transistor. State its type.

Description : Define Transistor. State its type.

Last Answer : Transistors are active electronic components made of semiconducting materials, which can amplify the electric signals by the application of a small input signal. Types of transistors: 1. Unipolar Junction Transistors 2. Bipolar Junction Transistors

Draw the symbol of photodiode.

Description : Draw the symbol of photodiode.

Last Answer : Symbol of photodiode.

Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Description : Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Last Answer : a)Here R1 and R2 forms voltage divider biasing arrangement. b)voltage drop across R2 ,forward biases the base emitter junction. c)so base current flows and hence collector ... Operating point stabilized against shift in temperature. · Operating point is almost independent of β variation

Sketch constructional diagram of LED and state its three applications.

Description : Sketch constructional diagram of LED and state its three applications.

Last Answer : Applications of LED: .Infra-red LEDs are used in burglar alarm systems. · For solid state video displays which are rapidly replacing CRT. · An image sensing circuit for picture phones. · In array of different types for displaying alpha-numeric characters. · Displays.

Draw circuit diagram for π filter and explain its working with waveforms.

Description : Draw circuit diagram for π filter and explain its working with waveforms.

Last Answer : Working of a Pi filter: In this circuit, we have a capacitor in parallel, then an inductor in series, followed by another capacitor in parallel. Capacitor C1 − This filter capacitor ... any ac component present in the signal to pass through it, which the inductor has failed to block.

Sketch construction of N-channel JFET and explain its operating principle.

Description : Sketch construction of N-channel JFET and explain its operating principle.

Last Answer : Construction of N-channel JFET: Working of N channel FET: a)when VGS is zero,ID flows because of VDS b)Now when VGS increases towards negative, depletion layer also increases on both sides. c)so VGS control drain current ID d)so it is called as field effect Transistor

Sketch block diagram of an unregulated power supply and explain function of each block.

Description : Sketch block diagram of an unregulated power supply and explain function of each block.

Last Answer : Block diagram of regulated DC power supply:-  Explanation 1)Transformer 2) Rectifier 3) Filter 4) Voltage regulator. 1. Transformer:- Transformer can be step up ... a voltage regulator. Output of the regulator circuit will be constant voltage under all operating circumstances.

State advantages of MOSFET over JFET.

Description : State advantages of MOSFET over JFET.

Last Answer : ➨It can be operated in either enhancement mode or depletion mode. ➨MOSFET have much higher input impedance compare to JFET. ➨They have high drain resistance due to lower resistance of channel. ➨It is easy to manufacture. ➨They support high speed of operation compare to JFETs.

State any four applications of regulated DC power supply.

Description : State any four applications of regulated DC power supply.

Last Answer : * Amplifiers * Mobile Phone power adaptors * Regulated power supplies in appliances * Various oscillators

Define with respect to FET:- (i) Static drain resistance (ii) Dynamic resistance (iii) Trans conductance (iv) Pinch-off voltage

Description : Define with respect to FET:- (i) Static drain resistance (ii) Dynamic resistance (iii) Trans conductance (iv) Pinch-off voltage

Last Answer : (i) Static drain resistance- It is the ratio of drain source voltage (ΔVDS) to the drain current (ID) at constant gate-source voltage. It can be expressed as, Rd = (VDS)/(ID) at ... of charge carrier and the value of drain current reaches its constant saturation value is called pinch off voltage.

Sketch circuit diagram of positive biased clipper using diode and explain its working.

Description : Sketch circuit diagram of positive biased clipper using diode and explain its working.

Last Answer : Positive Series Clipper with positive Vr. The following figure represents the circuit diagram for positive series clipper when the reference voltage applied is positive. During the positive cycle ... Hence the input signal that is greater than the reference voltage, appears at the output.

Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Description : Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Last Answer : (i) Ripple Factor - Ripple factor (γ) may be defined as the ratio of the root mean square (rms) value of the ripple voltage to the absolute value of the DC component of the ... the same rectifier. Effective VA Rating of transformer is the average of primary and secondary VA rating of transformer.

Derive the relationship between α and β of a transistor.

Description : Derive the relationship between α and β of a transistor.

Last Answer : Relationship between α and β of a transistor :

Draw O/P characteristics of CB configuration and explain its working.

Description : Draw O/P characteristics of CB configuration and explain its working.

Last Answer : In common base configuration, emitter is the input terminal, collector is the output terminal and base terminal is connected as a common terminal for both input and output. The base-emitter ... In this region, a small collector current flows called leakage current when emitter current is zero.

State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Description : State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Last Answer : Application of resistor: 1.Resistors are used in high frequency instrument. 2.Resistor is used in power control circuit. 3.It is used in DC power supplies. 4.Resistors are used ... DC Current  3.Electromagnetic Interference (EMI)  4.Magnetic Saturation Flux Density  5.Curie Temperature 

Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Describe strain gauge with labelled diagram.

Description : Describe strain gauge with labelled diagram.

Last Answer : A Strain gauge is a sensor whose resistance varies with applied force. It converts force, pressure, tension, weight, etc., into a change in electrical resistance which can then be measured. When external ... to the applied strain. So, the voltmeter can be calibrated in terms of strain or force. 

Define PIV, TUF, ripple factor, efficiency of rectifier.

Description : Define PIV, TUF, ripple factor, efficiency of rectifier.

Last Answer : PIV: Peak Inverse Voltage (PIV) is defined as the maximum negative voltage which appears across non-conducting reverse biased diode. TUF : Transformer Utilization Factor (TUF) is defined as the ratio of DC output ... Efficiency of rectifier: η = DC output power/ AC input power = PLdc / Pac

State different types of electrical signal and draw all types of waveforms.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms

Define Analog Transducer and give examples of it

Description : Define Analog Transducer and give examples of it

Last Answer : Analog Transducer: An analog transducer is a device that converts the input signal into a continuous DC signal of voltage or current. Examples: * Strain gauge * L.V.D.T * Thermocouple * Thermistor

Give different types of IC.

Description : Give different types of IC.

Last Answer : 1. Analog IC 2. Digital IC 3. Thin and thick film ICs 4. Monolithic ICs 5. Hybrid or multichip ICs

State advantages of MOSFET.

Description : State advantages of MOSFET.

Last Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.

List specification of BJT.

Description : List specification of BJT.

Last Answer : * The bipolar junction transistor (BJT) has small signal current gain, α (hfb). * Maximum collector current Ic (max). * Maximum collector to emitter voltage, VCE (max). * Collector to emitter ... . * Collector to emitter cut off voltage, VCEO. * Base emitter saturation voltage, VBE (sat).

Define resistor and draw symbol of variable resistor.

Description : Define resistor and draw symbol of variable resistor.

Last Answer : Resistor: A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Symbol of variable resistor:   

Draw a neat circuit diagram of class F commutation

Description : Draw a neat circuit diagram of class F commutation

Last Answer : class F commutation

Give the applications of IGBT

Description : Give the applications of IGBT

Last Answer : 1) AC and DC motor drives 2) SMPS 3) Inverters 4) Choppers 5) Solid-state Relays 6) solid-state Contactors

Describe the functional pin diagram of regulator IC 78XX and 79XX.

Description : Describe the functional pin diagram of regulator IC 78XX and 79XX.

Last Answer : IC 78XX: Explanation: 78XX series of IC regulators is representative of three terminal devices that are available with several fixed positive output voltages. It has three terminals labeled ... can also use 25μF aluminum electrolytic capacitor. Values given may be increased without limit. 

Describe thermal runaway of transistor and explain how it can be avoided.

Description : Describe thermal runaway of transistor and explain how it can be avoided.

Last Answer : Concept of thermal runaway:  1.We know that  IC = β IB + (1+ β) ICO  Where ICO is the leakage current and ICO is strongly dependent on temperature. 2. Leakage current approximately doubles for ...   Thermal runaway can be avoided by : 1) Using stabilization circuitry 2) Heat sink 

Describe working principle of LED with diagram.

Description : Describe working principle of LED with diagram.

Last Answer : Constructional Diagram: * Light Emitting Diode (LED) works only in forward bias condition. When Light Emitting Diode (LED) is forward biased, the free electrons from ... gallium arsenide and gallium phosphide the emitted photons have sufficient energy to produce intense visible light.

Sketch output characteristics of CE configuration. Show all the regions.

Description : Sketch output characteristics of CE configuration. Show all the regions.

Last Answer : Sketch output characteristics of CE configuration. Show all the regions.

Give the different types of amplifier coupling.

Description : Give the different types of amplifier coupling.

Last Answer : 1. Resistance – capacitance (RC) coupling.  2. Inductance (LC) coupling.  3. Transformer coupling (TC)  4. Direct coupling (D.C.)