Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel apparatus is used for determining flash points below 50°C (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Pick out the wrong statement.
(A) Pensky-Marten apparatus is used for determining flash points above
50°C
(B) Characterisation factor of paraffinic crude oil is more than 12
(C) Abel apparatus is used for determining flash points below 50°C
(D) An oil having high susceptibility to change in viscosity with temperature
changes, has a high viscosity index
by

1 Answer

Answer :

(D) An oil having high susceptibility to change in viscosity with temperature
changes, has a high viscosity index
by

Related questions

Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Description : Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Last Answer : (A) Abel apparatus

Pensky-Marten apparatus is used for those oils, whose flash points are __________ °F. (A) < 120 (B) > 120 (C) < 90 (D) 90-110

Description : Pensky-Marten apparatus is used for those oils, whose flash points are __________ °F. (A) < 120 (B) > 120 (C) < 90 (D) 90-110

Last Answer : (B) > 120

The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is(A) Paraffinic(B) Naphthenic(C) Intermediate(D) None of these

Description : The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is (A) Paraffinic (B) Naphthenic (C) Intermediate (D) None of these

Last Answer : (A) Paraffinic

Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Description : Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Last Answer : (C) Cleveland (open cup type)

. Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature

Abel apparatus is used for those oils, whose flash points are _______°F. (A) < 120 (B) > 120 (C) > 280 (D) 300-600

Description : Abel apparatus is used for those oils, whose flash points are _______°F. (A) < 120 (B) > 120 (C) > 280 (D) 300-600

Last Answer : (A) < 120

Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Description : Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Last Answer : (A) Pensky Martens apparatus

The characterisation factor of crude petroleum oil is around (A) 3 (B) 11 (C) 22 (D) 28

Description : The characterisation factor of crude petroleum oil is around (A) 3 (B) 11 (C) 22 (D) 28

Last Answer : (B) 11

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these

Description : True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these

Last Answer : (D) None of these

Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Description : Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Last Answer : (C) Asphaltic

Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Description : Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Last Answer : (B) Naphthenic

__________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Last Answer : (B) Naphthenic

A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these

Description : Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these

Last Answer : (A) Less changes in fluidity of oil with temperature

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Description : Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Last Answer : (B) Is the measure of variation of viscosity with temperature

Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of petrol produced by catalytic process is more than that produced by thermal cracking (D) Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Description : Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of ... Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Last Answer : (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C) Slow chemical reactions have generally high values of activation energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Description : Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C ... energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Last Answer : (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature

High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Last Answer : (C) Is highly paraffinic

High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Last Answer : (B) It is highly paraffinic in nature

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Description : The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Last Answer : (C) Bomb calorimeter

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Last Answer : (C) Corrosion resistance

Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

. Pick out the wrong statement. (A) The eddy viscosity is a function of(B) The eddy viscosity is a fluid property(C) The viscosity of gas increases with increase in temperature(D) The viscosity of a liquid increases with decrease in temperature the type of turbulence involved

Description : . Pick out the wrong statement. (A) The eddy viscosity is a function of the type of turbulence involved (B) The eddy viscosity is a fluid property (C) The viscosity of gas increases with increase in temperature (D) The viscosity of a liquid increases with decrease in temperature

Last Answer : (B) The eddy viscosity is a fluid property

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Description : Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Last Answer : Answer : D

Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Last Answer : Answer : D

The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 5 3 5 3 5 3 5 3 5 5 3 3 5 3 5 3 Region to be amplified . (a) B - denaturation at a temperature of about 98°C separating the two DNA strands (b) A - denaturation at a temperature of about 50°C (c) C - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Description : The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 ... - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Last Answer : (c) C - extension in the presence of heat stable DNA polymerase

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Description : Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) A pale color of petroleum product indicates lower viscosity (B) Color of petroleum products indicates the degree of refinement (C) Lighter petroleum distillates are lighter in color than the heavier residual oils (D) Fluorescence of oils helps to detect its adulteration

Description : Pick out the wrong statement. (A) A pale color of petroleum product indicates lower viscosity (B) Color of petroleum products indicates the degree of refinement (C) Lighter petroleum distillates are ... in color than the heavier residual oils (D) Fluorescence of oils helps to detect its adulteration

Last Answer : (A) A pale color of petroleum product indicates lower viscosity

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Last Answer : (C) Higher flash point and fire point

Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (C) Aniline point

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Description : Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Last Answer : (C) Smoke point

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution