During program execution content of main memory undergo changes and, but control memory has _ microprogram: a. Static b. Dynamic c. Compile time d. Fixed

During program execution content of main memory undergo changes and, but control memory
has _ microprogram:
a. Static
b. Dynamic
c. Compile time
d. Fixed
by

1 Answer

Answer :

d. Fixed
by

Related questions

When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non executable, pointer and subroutine b. Executable, Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Description : When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non ... , Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Last Answer : d. Executable, Stack and Subroutine

A computer having writable control memory is known as_ a. Static micro programmable b. Dynamic micro programmable c. Botha & b d. None of these

Description : A computer having writable control memory is known as_ a. Static micro programmable b. Dynamic micro programmable c. Botha & b d. None of these

Last Answer : b. Dynamic micro programmable

Which microinstruction provide next instruction from control memory: a. Microinstruction execution b. Microinstruction Buffer c. Microinstruction decoder d. Microinstraction Sequencing

Description : Which microinstruction provide next instruction from control memory: a. Microinstruction execution b. Microinstruction Buffer c. Microinstruction decoder d. Microinstraction Sequencing

Last Answer : d. Microinstraction Sequencing

Copy of data in cache memory is called. a. Datacache b. Execution cache c. Address cache d. Control cache

Description : Copy of data in cache memory is called. a. Datacache b. Execution cache c. Address cache d. Control cache

Last Answer : a. Datacache

What is the purpose of microinstruction executions. a. Generate a control signal b. Generate a control signal to compile c. Generate a control signal to execute d. Allof these

Description : What is the purpose of microinstruction executions. a. Generate a control signal b. Generate a control signal to compile c. Generate a control signal to execute d. Allof these

Last Answer : c. Generate a control signal to execute

Ininstruction formats the information required by the _ for execution: a. ALU b. CPU Cc. RISC d. DATA

Description : Ininstruction formats the information required by the _ for execution: a. ALU b. CPU Cc. RISC d. DATA

Last Answer : b. CPU

The instruction fetch operation is initiated by loading the contents of program counter into the and sends _ request to memory: a. Memory register and read b. Memory register and write c. Data register and read d. Address register and read

Description : The instruction fetch operation is initiated by loading the contents of program counter into the and sends _ request to memory: a. Memory register and read b. Memory register and write c. Data register and read d. Address register and read

Last Answer : d. Address register and read

Which of the following differentiates between overloaded functions and overridden functions ? (A) Overloading is a dynamic or runtime binding and overridden is a static or compile time binding. (B) Overloading is a static or compile time binding and overriding is dynamic or runtime binding. (C) Redefining a function in a friend class is called overloading, while redefining a function in a derived class is called as overridden function. (D) Redefining a function in a derived class is called function overloading, while redefining a function in a friend class is called function overriding.

Description : Which of the following differentiates between overloaded functions and overridden functions ? (A) Overloading is a dynamic or runtime binding and overridden is a static or compile time binding. ... function overloading, while redefining a function in a friend class is called function overriding.

Last Answer : (B) Overloading is a static or compile time binding and overriding is dynamic or runtime binding.

Copy of instruction in cache memory is known as: a Execution cache b. Data cache c. Instruction cache d. Allof these

Description : Copy of instruction in cache memory is known as: a Execution cache b. Data cache c. Instruction cache d. Allof these

Last Answer : c. Instruction cache

function is used to transfer the control to end of a program which uses one argument( ) and takes value is zero for_ __ termination and non-zero for _termination: a. _ Exit( ) normal, abnormal b. Break, normal, abnormal Botha & b None of these

Description : function is used to transfer the control to end of a program which uses one argument( ) and takes value is zero for_ __ termination and non-zero for _termination: a. _ Exit( ) normal, abnormal b. Break, normal, abnormal Botha & b None of these

Last Answer : a. _ Exit( ) normal, abnormal

Assembler works to convert assembly language program into machine language : a. Before the computer can execute it b. After the computer can execute it c. In between execution d. All of these

Description : Assembler works to convert assembly language program into machine language : a. Before the computer can execute it b. After the computer can execute it c. In between execution d. All of these

Last Answer : a. Before the computer can execute it

The time required to complete one instruction is called. a. Fetch time b. Execution time c. Control time d. All of these

Description : The time required to complete one instruction is called. a. Fetch time b. Execution time c. Control time d. All of these

Last Answer : b. Execution time

Which is the main function of the computer. a. Execute of programs b. Execution of programs c. Both d. None of these

Description : Which is the main function of the computer. a. Execute of programs b. Execution of programs c. Both d. None of these

Last Answer : b. Execution of programs

SDRAM stands for. a. System dynamic random access memory b. Synchronous dynamic random access memory c. Both d. None

Description : SDRAM stands for. a. System dynamic random access memory b. Synchronous dynamic random access memory c. Both d. None

Last Answer : b. Synchronous dynamic random access memory

Which is the method by which instructions are selected for execution: a. Instruction selection b. — Selection control c. Instraction sequencing d. All of these

Description : Which is the method by which instructions are selected for execution: a. Instruction selection b. — Selection control c. Instraction sequencing d. All of these

Last Answer : c. Instraction sequencing

Which unit is necessary for the execution of instruction: a. Timing b. Control ce. Both d. None of these

Description : Which unit is necessary for the execution of instruction: a. Timing b. Control ce. Both d. None of these

Last Answer : ce. Both

Which of the following is not typically a benefit of dynamic linking? I. Reduction in overall program execution time. II. Reduction in overall space consumption in memory. III. Reduction in overall space consumption on disk. IV. Reduction in the cost of software updates. (A) I and IV (B) I only (C) II and III (D) IV only

Description : Which of the following is not typically a benefit of dynamic linking? I. Reduction in overall program execution time. II. Reduction in overall space consumption in memory. III. Reduction in overall space consumption on disk. IV. ... updates. (A) I and IV (B) I only (C) II and III (D) IV only

Last Answer : (B) I only 

Call instruction is written inthe ss program. a. Main b. Procedures c. Program d. Memory

Description : Call instruction is written inthe ss program. a. Main b. Procedures c. Program d. Memory

Last Answer : a. Main

The micro program is an written in microcode and stored in firmware which is also referred as___ | a. Interpreter and control memory b. Translator and control store c. Translator and control memory d. ‘Interpreter and Translator

Description : The micro program is an written in microcode and stored in firmware which is also referred as___ | a. Interpreter and control memory b. Translator and control store c. Translator and control memory d. ‘Interpreter and Translator

Last Answer : a. Interpreter and control memory

program converts machine instructions into control signals. a. Control memory program b. Control store program c Botha&b d. Only memory

Description : program converts machine instructions into control signals. a. Control memory program b. Control store program c Botha&b d. Only memory

Last Answer : c Botha&b

The control memory contains a set of words where each word is: a. Microinstruction b. Program c. Sets d. All of these

Description : The control memory contains a set of words where each word is: a. Microinstruction b. Program c. Sets d. All of these

Last Answer : a. Microinstruction

The register that includes the address of the memory unit is termed asthe _ a. MAR b PC Cc. IR d. None of these

Description : The register that includes the address of the memory unit is termed asthe _ a. MAR b PC Cc. IR d. None of these

Last Answer : a. MAR

The memory bus is also referred as _ a. Databus b. Address bus c. Memory bus d. — Allof these

Description : The memory bus is also referred as _ a. Databus b. Address bus c. Memory bus d. — Allof these

Last Answer : a. Databus

The function of these microinstructions is to issue the micro orders to_ _ a. CPU b. Memory c. Register d. Accumulator

Description : The function of these microinstructions is to issue the micro orders to_ _ a. CPU b. Memory c. Register d. Accumulator

Last Answer : a. CPU

Microcodes are stored as firmware in _ a. Memory chips b. Registers c. accumulators d. none of these

Description : Microcodes are stored as firmware in _ a. Memory chips b. Registers c. accumulators d. none of these

Last Answer : a. Memory chips

In second pass, assembler creates _ in binary format for every instruction in program and then refers to the symbol table to giving every symbol an_ _ relating the segment. a. Code and program b. Program and instruction c. Code and offset d. All of these

Description : In second pass, assembler creates _ in binary format for every instruction in program and then refers to the symbol table to giving every symbol an_ _ relating the segment. a. Code and program b. Program and instruction c. Code and offset d. All of these

Last Answer : c. Code and offset

A module contains machine code with specification on_ _ a. Relative addresses b. Absolute addresses c. Object program d. None of these

Description : A module contains machine code with specification on_ _ a. Relative addresses b. Absolute addresses c. Object program d. None of these

Last Answer : a. Relative addresses

Testing helpstoensure_——_—of the program for use within a system. a. Quality, accuracy and except b. Quality, accuracy and acceptance c. Design, assurance and acceptance d. Quality, accuracy and development

Description : Testing helpstoensure_——_—of the program for use within a system. a. Quality, accuracy and except b. Quality, accuracy and acceptance c. Design, assurance and acceptance d. Quality, accuracy and development

Last Answer : b. Quality, accuracy and acceptance

The compiler _ translate a program code with any syntax error: a. Can b. Cannot c. Without d. None of these

Description : The compiler _ translate a program code with any syntax error: a. Can b. Cannot c. Without d. None of these

Last Answer : b. Cannot

Subroutine is called _ a. In Same program b. Inexternal program co Botha&b d. None of these

Description : Subroutine is called _ a. In Same program b. Inexternal program co Botha&b d. None of these

Last Answer : co Botha&b

Which of the following is used for very high speed searching applications ? (1) Flash Memory (2) Content-addressable Memory (3) Dynamic Random Access Memory (4) Static Random Access Memory

Description : Which of the following is used for very high speed searching applications ? (1) Flash Memory (2) Content-addressable Memory (3) Dynamic Random Access Memory (4) Static Random Access Memory

Last Answer : Content-addressable Memory

One of use of microprogramming to implement _ ____ of processor in Intel 80x86 and Motorola 680x0 processors whose instruction set are evolved from 360 original. a. Control structure b. Without control c. Control unit d. Only control

Description : One of use of microprogramming to implement _ ____ of processor in Intel 80x86 and Motorola 680x0 processors whose instruction set are evolved from 360 original. a. Control structure b. Without control c. Control unit d. Only control

Last Answer : c. Control unit

Decoding of an instruction in RISC architecture means decision on working of control unit for: a. Remainder of instructions b. _ Divisor of instructions c. Dividend of instructions d. None of these

Description : Decoding of an instruction in RISC architecture means decision on working of control unit for: a. Remainder of instructions b. _ Divisor of instructions c. Dividend of instructions d. None of these

Last Answer : a. Remainder

The simplest method of controlling sequence of instruction execution is to have each instruction explicitly specify: a. The address of next instruction to be run b. Address of previous instruction c. Both a &b d. None of these

Description : The simplest method of controlling sequence of instruction execution is to have each instruction explicitly specify: a. The address of next instruction to be run b. Address of previous instruction c. Both a &b d. None of these

Last Answer : a. The address of next instruction to be run

Execution of instruction specified by instruction to perform: a. Operation b. Operands c. Both a &b d. None of these

Description : Execution of instruction specified by instruction to perform: a. Operation b. Operands c. Both a &b d. None of these

Last Answer : a. Operation

Which of the following 2 task are performed to execute an instruction by MCU: a. Microinstruction execution b. Microinstruction sequencing c. Botha&b d. None of these

Description : Which of the following 2 task are performed to execute an instruction by MCU: a. Microinstruction execution b. Microinstruction sequencing c. Botha&b d. None of these

Last Answer : c. Botha&b

state keeps track of position related to execution of an instruction: a. Major b. Minor c. Botha & b d. None of these

Description : state keeps track of position related to execution of an instruction: a. Major b. Minor c. Botha & b d. None of these

Last Answer : a. Major

Cache and main memory will not be able to hold their contents when the power is off. They are ________ A. Static B. Dynamic C. Non Volatile D. Volatile

Description : Cache and main memory will not be able to hold their contents when the power is off. They are ________ A. Static B. Dynamic C. Non Volatile D. Volatile

Last Answer : D. Volatile

Cache and main memory will lose their contents when the power is off. They are-- 1) Dynamic 2) Faulty 3) Volatile 4) Static

Description : Cache and main memory will lose their contents when the power is off. They are-- 1) Dynamic 2) Faulty 3) Volatile 4) Static

Last Answer : 3) Volatile

Cache and main memory will lose their contents when the power is off. They are-- 1 Dynamic 2 Faulty 3 Volatile 4 Static

Description : Cache and main memory will lose their contents when the power is off. They are-- 1 Dynamic 2 Faulty 3 Volatile 4 Static

Last Answer : 3 Volatile

The instruction read from memory is then placed in the ___and contents of program counter is __ so that it contains the address of_ __ instruction in the program. a. Program counter, incremented and next b. Instruction register, incremented and previous c. Instruction register, incremented and next d. Address register, decremented and next

Description : The instruction read from memory is then placed in the ___and contents of program counter is __ so that it contains the address of_ __ instruction in the program. a. Program counter, ... incremented and previous c. Instruction register, incremented and next d. Address register, decremented and next

Last Answer : c. Instruction register, incremented and next

Itis the task of the __to locate externally defined symbols in programs, load them in to memory by placing their __ of symbols in calling program: a. Loader and name b. Linker and values c. Linker and name d. Loader and values

Description : Itis the task of the __to locate externally defined symbols in programs, load them in to memory by placing their __ of symbols in calling program: a. Loader and name b. Linker and values c. Linker and name d. Loader and values

Last Answer : d. Loader and values

Before checking the program for errors in translating code into machine language the high level language code is loaded into __ a. Register b. Memory c. Data d. CPU

Description : Before checking the program for errors in translating code into machine language the high level language code is loaded into __ a. Register b. Memory c. Data d. CPU

Last Answer : b. Memory

Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Description : Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Last Answer : g. Allof these

Which memory is assembled between main memory and CPU: a. Primary memory b. Cache memory Cc. Botha & b d. None of these

Description : Which memory is assembled between main memory and CPU: a. Primary memory b. Cache memory Cc. Botha & b d. None of these

Last Answer : b. Cache memory

Cache memory is located between main memory and : a. CPU b. Memory c. Botha &b d. None of these

Description : Cache memory is located between main memory and : a. CPU b. Memory c. Botha &b d. None of these

Last Answer : a. CPU

Micro-orders generate the_ __ address of operand and execute instruction and prepare for fetching next instruction from the main memory: a. Physical b. Effective c. Logical d. all of above

Description : Micro-orders generate the_ __ address of operand and execute instruction and prepare for fetching next instruction from the main memory: a. Physical b. Effective c. Logical d. all of above

Last Answer : b. Effective

Which memory is used to copy instructions or data currently used by CPU: a. Main memory b. Secondary memory c. Cache memory d. None of these

Description : Which memory is used to copy instructions or data currently used by CPU: a. Main memory b. Secondary memory c. Cache memory d. None of these

Last Answer : c. Cache memory

Instruction formats contains the memory address of the a. Memory data b. Main memory Cc. CPU d. ALU

Description : Instruction formats contains the memory address of the a. Memory data b. Main memory Cc. CPU d. ALU

Last Answer : b. Main memory

In which mode the main memory location holds the EA of the operand: a. Immediate addressing b. Direct addressing c. Register addressing d. Indirect addressing

Description : In which mode the main memory location holds the EA of the operand: a. Immediate addressing b. Direct addressing c. Register addressing d. Indirect addressing

Last Answer : d. Indirect addressing