What is the distribution of DC control supply in CL IV, III, II- 415V and 6.6 kV?

What is the distribution of DC control supply in CL IV, III, II- 415V and 6.6 kV?
by

1 Answer

Answer :

Closing coil and Trip coil 2 supply from one source.

Trip coil 1 supply from one source.

Protections supply from one source. 


by

Related questions

Why 1.1 kV grade cables used for 415V?

Description : Why 1.1 kV grade cables used for 415V?

Last Answer : To take care of the both earthed / unearthed systems.  

Aqueous solution of how many of the following species turn blue limtus red ? (i) `SF_(4)` (ii) `PCl_(3)` (iii) `H_(2)O` (iv) `NO_(2)Cl` (v) `SF_(6)` (

Description : Aqueous solution of how many of the following species turn blue limtus red ? (i) `SF_(4)` (ii) `PCl_(3)` (iii) `H_(2)O` (iv) `NO_(2)Cl` (v) `SF_(6)` (

Last Answer : Aqueous solution of how many of the following species turn blue limtus red ? (i) `SF_(4)` (ii) `PCl_(3)` ( ... )` (xii) `COCl_(2)` (viii) `C Cl_(4)`

Aqueous solution of how many of the following species turn blue limtus red ? (i) `SF_(4)` (ii) `PCl_(3)` (iii) `H_(2)O` (iv) `NO_(2)Cl` (v) `SF_(6)` (

Description : Aqueous solution of how many of the following species turn blue limtus red ? (i) `SF_(4)` (ii) `PCl_(3)` (iii) `H_(2)O` (iv) `NO_(2)Cl` (v) `SF_(6)` (

Last Answer : Aqueous solution of how many of the following species turn blue limtus red ? (i) `SF_(4)` (ii) `PCl_(3)` ( ... )` (xii) `COCl_(2)` (viii) `C Cl_(4)`

Which section of the circuit shown in the illustration changes AC to DC? EL-0085 A. I B. II C. III D. IV

Description : Which section of the circuit shown in the illustration changes AC to DC? EL-0085 A. I B. II C. III D. IV

Last Answer : Answer: B

For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) the number of geometrical isomers, (v) whether there is an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride

How many anions evolve brownish gas when treated with dil. /con. HCl ? `(i) CO_(3)^(2-) " " (ii)SO_(3)^(2-) " " (iii) NO_(2)^(-) " " (iv)Cl^(-)` `(v)

Description : How many anions evolve brownish gas when treated with dil. /con. HCl ? `(i) CO_(3)^(2-) " " (ii)SO_(3)^(2-) " " (iii) NO_(2)^(-) " " (iv)Cl^(-)` `(v)

Last Answer : How many anions evolve brownish gas when treated with dil. /con. HCl ? `(i) CO_(3)^(2-) " " (ii)SO_(3)^(2-) ... NO_(3)^(-) " " (vii) CH_(3)CO O^(-)`

How many compounds liberate `NH_(3)` on heating from the following ? (i) `(NH_(4))_(2)SO_(4) " " (ii) (NH_(4))_(2)CO_(3) " " (iii) NH_(4)Cl` (iv) `NH_

Description : How many compounds liberate `NH_(3)` on heating from the following ? (i) `(NH_(4))_(2)SO_(4) " " (ii) (NH_(4))_(2)CO_(3) " " (iii) NH_(4)Cl` (iv) `NH_

Last Answer : How many compounds liberate `NH_(3)` on heating from the following ? (i) `(NH_(4))_(2)SO_(4) " " (ii) (NH_(4)) ... 3) " " (v) (NH_(4))_(2)Cr_(2)O_(7)`

In which section of the 24 VDC power supply circuit illustrated, does the greatest change in voltage level take place when fed from ships power. EL-0085 A. I B. II C. III D. IV

Description : In which section of the 24 VDC power supply circuit illustrated, does the greatest change in voltage level take place when fed from ships power. EL-0085 A. I B. II C. III D. IV

Last Answer : Answer: A

How 6.6 kV-bus supply was chosen?

Description : How 6.6 kV-bus supply was chosen?

Last Answer : 11 kV was rejected in view of the high insulation cost with 11 kV motors. 3.3 kV was rejected, since max motor size with 3.3 kV bus is limited to 2 MW. But we are having the motors having rating more than 2 MW, which cannot suit to 3.3 kV bus. 6.6 kV bus we can start upto 5 mw size motor. 

What are the main sources of power supply to 6.6 kV buses?

Description : What are the main sources of power supply to 6.6 kV buses? 

Last Answer : a. Unit transformer which steps down the generated voltage to 6.6 kV from the generator. b. Start up transformer, which steps down the grid voltage to 6.6 kV. 

What are the advantages and disadvantages of 415V English Electric breaker?

Description : What are the advantages and disadvantages of 415V English Electric breaker? 

Last Answer : Advantages 1. Auto reclosing shutters. 2. Proven wiping contacts. 3. Sturdy rugged mechanism. 4. Reliable aux. Switches contacts. 5. Slow closing facility independent of closing spring. ... also. No neutral bus bar link, we cannot finger contact resistance since fixed on bus side. 

Why all 415V transformers are chosen Dyn 11? What are the protections provided for the 415V transformers?

Description : Why all 415V transformers are chosen Dyn 11? What are the protections provided for the 415V transformers?

Last Answer : a) To facilitate interchange. b) To have momentary parallel during changeover. Protections a) Door interlock to trip HT and LT breakers. b) LT breaker can on only after HT breaker is in on position. c) ... and restricted E/F (51N + 64). f) Winding temp high trip (140°C trip and 130°C alarm) 

In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 1 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal ... 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: A

In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

Define: i) Q point ii) DC loadline iii) Need of biasing iv) Current gain

Description : Define: i) Q point ii) DC loadline iii) Need of biasing iv) Current gain

Last Answer : i) Q point: It is the point on the load line which represents the dc current through a transistor (ICQ) and the voltage across it (VCEQ), when no ac signal is applied.  ii) DC load line: The ... region is as desired.  iv) Current Gain: It is a ratio of output current to input current.

State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator.

Description : State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator. 

Last Answer : Function : i) Yoke: The yoke serves the following two purposes. i) It supports the other components such as poles and provides mechanical protection for whole machine. ii) It forms a part of ... one pole to another and thus to help the motor to develop a continuous and unidirectional torque  

Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

Description : Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

Last Answer : Ans: i) Length of circuit - a) AC track circuit is having long length upto 3 to 5 km b) DC track circuit is having short length  ii)Application -a) AC track circuit is used ... ) Maintenance - a) AC track circuit has easier and cheaper maintenance b) DC track circuit has complicated maintenance 

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Define the terms related to a.c. supply with waveform : i) Instantaneous value ii) Time period iii) Amplitude iv) Phase difference.

Description : Define the terms related to a.c. supply with waveform : i) Instantaneous value ii) Time period iii) Amplitude iv) Phase difference. 

Last Answer : i) Instantaneous value: The instantaneous value is the value of an alternating quantity (it may ac voltage or ac current or ac power) at a particular instant of time in the cycle .  OR  ... difference: Phase difference is the difference in phase angle between two sinusoids or phasors. 

(i) Write down the IUPAC name of the following complex : [Cr(NH3)2CI3(en)]Cl (en = ethylenediamine) (ii) Write the formula for the following complex : Pentaamminenitrito-o-Cobalt (III) -Chemistry

Description : (i) Write down the IUPAC name of the following complex : [Cr(NH3)2CI3(en)]Cl (en = ethylenediamine) (ii) Write the formula for the following complex : Pentaamminenitrito-o-Cobalt (III) -Chemistry

Last Answer : (I) [Cr(NH3)2Cl3(en)]Cl IUPAC name : Diammine dichlorido ethylenediamine chromium (III) chloride. (ii) [Co(NH3)5(ONO)]2+

Which of the following statement is correct regarding following process ? `(i) Cl overset(E.A)to Cl^(-) " " (ii) Cl^(-) overset(I.E.)to Cl` `(iii) Cl

Description : Which of the following statement is correct regarding following process ? `(i) Cl overset(E.A)to Cl^(-) " " (ii) Cl^(-) overset(I.E.)to Cl` `(iii) Cl

Last Answer : Which of the following statement is correct regarding following process ? `(i) Cl overset(E.A)to Cl^(-) " ... of process (iv)|=|E.A of process (iii)|

Reactivity order of the following alkenes for hydrochlorination (HCl) is (I) `CH_(2) = CH - Cl` (II) `(CH_(3))_(2)C=CH_(2)` (III) `CH_(2) = CH - CHO`

Description : Reactivity order of the following alkenes for hydrochlorination (HCl) is (I) `CH_(2) = CH - Cl` (II) `(CH_(3))_(2)C=CH_(2)` (III) `CH_(2) = CH - CHO`

Last Answer : Reactivity order of the following alkenes for hydrochlorination (HCl) is (I) `CH_(2) = CH - Cl` (II) `(CH_(3) ... `II gt I gt III` D. `III gt I gt II`

Arrange the compounds in order of decreasing acidic strength : (I) `ClCH_(2)-CH_(2)-OH` (II) `Cl_(2)CH-CH_(2)-OH` (III) `Cl-CH_(2)-CH_(2)-CH_(2)-OH` (

Description : Arrange the compounds in order of decreasing acidic strength : (I) `ClCH_(2)-CH_(2)-OH` (II) `Cl_(2)CH-CH_(2)-OH` (III) `Cl-CH_(2)-CH_(2)-CH_(2)-OH` (

Last Answer : Arrange the compounds in order of decreasing acidic strength : (I) `ClCH_(2)-CH_(2)-OH` (II) `Cl_(2)CH-CH_(2 ... IV gt III` D. `II gt I gt III gt IV`

For the following `(i) I^(-) (ii) Cl^(-) (iii) Br^(-)` the increasing order of nucleophilicity would be:

Description : For the following `(i) I^(-) (ii) Cl^(-) (iii) Br^(-)` the increasing order of nucleophilicity would be:

Last Answer : For the following `(i) I^(-) (ii) Cl^(-) (iii) Br^(-)` the increasing order of nucleophilicity would be: A. ... )ltCl^(-)` D. `Cl^(-)ltBr^(-)ltI^(-)`

Find the structure of the following atoms: (i) `._(8)^(16)O" "` (ii) `._(17)^(35)Cl" "` (iii) `._(13)^(27)Al`.

Description : Find the structure of the following atoms: (i) `._(8)^(16)O" "` (ii) `._(17)^(35)Cl" "` (iii) `._(13)^(27)Al`.

Last Answer : Find the structure of the following atoms: (i) `._(8)^(16)O" "` (ii) `._(17)^(35)Cl" "` (iii) `._(13)^(27)Al`.

Can a 415V motor run on 525V?

Description : Can a 415V motor run on 525V?

Last Answer : It is not advisable to do so. You may burn the winding,insulation may fail.

Can a 415V motor run on 525V?

Description : Can a 415V motor run on 525V?

Last Answer : It is not advisable to do so. You may burn the winding,insulation may fail.

The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open

Description : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the ... frequency of induced voltage across slip ring is A) 30 Hz B) 70 Hz C) 20 Hz D) 35 Hz

Last Answer : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the normal direction, The frequency of induced voltage across slip ring is 70 Hz

Which section of the circuit is responsible for maintaining a nearly constant voltage for all loads within its operating range? EL-0085 A. I B. II C. III D. IV

Description : Which section of the circuit is responsible for maintaining a nearly constant voltage for all loads within its operating range? EL-0085 A. I B. II C. III D. IV

Last Answer : Answer: D

Which section of the circuit shown in the illustration smooths out highest degree of pulsations? EL-0085 A. I B. II C. III D. IV

Description : Which section of the circuit shown in the illustration smooths out highest degree of pulsations? EL-0085 A. I B. II C. III D. IV

Last Answer : Answer: C

Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Ionisation potential employed in the industrial electrostatic precipitator is of the order of (A) 30 to 70 kV DC (B) 30 to 70 kV AC (C) 230 V AC (D) 230 V DC

Description : Ionisation potential employed in the industrial electrostatic precipitator is of the order of (A) 30 to 70 kV DC (B) 30 to 70 kV AC (C) 230 V AC (D) 230 V DC

Last Answer : (A) 30 to 70 kV DC

Compare Single phase 25 kV AC and 1500 V DC track electrification.

Description : Compare Single phase 25 kV AC and 1500 V DC track electrification.

Last Answer : Points Single phase 25 kV AC track Electrification 1500 V DC track electrification Supply given to O/H condition 1-ph, 25KV, AC 50 Hz  600/750V-Tromways 1500/3000V urban/suburban ... track distance Less More Applications Main line services Urban and suburban area

What are the types of cables used in 6.6 kV and 415 V system voltages?

Description : What are the types of cables used in 6.6 kV and 415 V system voltages? 

Last Answer : In 6.6 kV system AC (unearthed) grade having stranded aluminium conductors cables are used. Their insulation's are as follows. 1. XLPE - Crossed linked polyethylene insulation. 2. FRLS PVC - Fire ... V grade copper or aluminium stranded cables are used. Their insulations are HR PVC and FS type. 

What are the interlocks between 415 V and 6.6 kV switch gear?

Description : What are the interlocks between 415 V and 6.6 kV switch gear? 

Last Answer : 6.6 kV Breaker closed cannot rack in or out. Service lever cannot move while breaker closed. Breaker cannot be closed in in-between position. 415 V Breaker door cannot be opened when breaker is ... . Breaker cannot be closed in in-between position. Breaker closed cannot be rack in or out. 

What is the difference between lockout of 6.6 kV and 415 V CB’s?

Description : What is the difference between lockout of 6.6 kV and 415 V CB’s?

Last Answer : Voltage levels. Manual / auto reset. Lockout relays of 415 V breakers are all Electro-magnetic type. There is no mechanical latch. But in 6.6 kV it is of mechanical latch type relays.

Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Description : Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Last Answer : a) To avoid relay mal-operation due to CT saturation b) Better sensitivity is got. c) High pickup and TMS avoided in IDMT earth fault relay. 

Why 2 types of earth fault relays in 6.6 kV side of transformers?

Description : Why 2 types of earth fault relays in 6.6 kV side of transformers?

Last Answer : I – Trips 6.6 kV breakers only. It gives primary protection for 6.6 kV bus bars. I1 – Trips the both HT and LT breakers. It acts as a backup to ref and also acts as backup to bus bar earthfault relay. 

What is the design basis of 6.6 kV aluminium bus bars?

Description : What is the design basis of 6.6 kV aluminium bus bars?  

Last Answer : a) Temperature rises not exceed 90 ºC. b) Withstand short ckt stresses. c) Take care of thermal expansion. 

During unit operation can we have one UT feeding both unit 6.6 kV loads?

Description : During unit operation can we have one UT feeding both unit 6.6 kV loads? 

Last Answer : No, logically prevented.  

Why 6.6 kV transformer is resistance grounded by 10 ohms and current limited to 400 A?

Description : Why 6.6 kV transformer is resistance grounded by 10 ohms and current limited to 400 A?

Last Answer : a) To reduce burning and melting in faulted switchgear or machine. b) To reduce mechanical stresses in equipment. c) To reduce the electrical hazards by stray ground fault currents in the ground ... screen in 6.6 kV XLPE (cross-linked polyethylene). Therefore the cost of the cable decreases. 

What is the difference in action of lock out pressure signal on 6.6 kV and 220 kV breakers?

Description : What is the difference in action of lock out pressure signal on 6.6 kV and 220 kV breakers?

Last Answer : When lock out signal comes to 6.6 kV breakers the breaker will trip. Where as in case of 220 kV breakers the breaker will not trip. If the breaker is open it will be open only and can not be closed. If it is in closed condition it will be closed.

What type breakers are provided in 6.6 kV buses?

Description : What type breakers are provided in 6.6 kV buses?

Last Answer : ABB. Make, SF6 gas, 1250A and 2000A capacity circuit breakers are provided in 6.6 kV buses. 

List some important loads to 6.6 kV buses.

Description : List some important loads to 6.6 kV buses. 

Last Answer : a. Auxiliary transformers. b. PHT motors. c. BFP motors.  d. CEP motors. e. CCW motors. f. Chiller motors. g. Pressuring pump motors. 

What is the minimum voltage required for starting of 6.6 kV motors?

Description : What is the minimum voltage required for starting of 6.6 kV motors?

Last Answer : Minimum 80% of rated voltage.

The voltage at the two ends of a transmission line are 132 KV and its reactance is 40 ohm. The Capacity of the line is (A) 435.6 MW (B) 217.8 MW (C) 251.5 MW (D) 500 MW

Description : The voltage at the two ends of a transmission line are 132 KV and its reactance is 40 ohm. The Capacity of the line is (A) 435.6 MW (B) 217.8 MW (C) 251.5 MW (D) 500 MW

Last Answer : (A) 435.6 MW

A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Description : A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Last Answer : Answer: B

As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg