Name any two aerodynamic controls for WPP.

Name any two aerodynamic controls for WPP.
by

1 Answer

Answer :

Aerodynamic Control for WPP:

 Pitch control

 Passive stall control

 Active stall control

 Yaw control
by

Related questions

Identify & explain any two difficulties faced while connecting WPP to the power grid.

Description : Identify & explain any two difficulties faced while connecting WPP to the power grid.

Last Answer : Difficulties Faced while Connecting WPP to Power Grid: There are several technical issues associated with grid connected systems like power quality issues, power and voltage fluctuations, storage, protection ... that is out of phase with grid voltage and so provide power factor correction.

Identify any two weekly maintenance activities for WPP.

Description : Identify any two weekly maintenance activities for WPP.

Last Answer : Weekly Maintenance Activities: Routine checkup, monitoring, periodic reports. Blade cleaning. Higher voltage equipment maintenance. Turbines require periodic lubrication, oil changes. Bolt and electrical ... . Machine should be checked for corrosion. Check guy wire for proper tension.

Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Description : Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Last Answer : Scheduled Maintenance of Stall Pitch: In scheduled maintenance of stall pitch, following maintenance activities are performed quarterly or yearly basis: 1. Grease the cable, which pulls the blade ... battery. In case of power failure, batteries will ensure the movement of blade to safe position.

Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Description : Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Last Answer : Braking Mechanism For The Large WPP: 1. Furling Mechanism: Furling allows the whole set of blades to change its position and blades turned away from wind, if wind speed is beyond safety limit. It ... 1.To harness optimum power from wind 2.To protect turbine in case of high wind speed.

Related to WPP define following wind speeds

Description : Related to WPP define following wind speeds  i) Cut in  ii) Cut out iii) Survival iv) Threshold

Last Answer : i) Cut-in wind speed: This is the minimum wind speed at which the turbine blades overcome friction and begin to rotate.  ii) Cut out speed: This is the speed at which the turbine ... this range, it is ensured that available energy is above the minimum threshold and structural health is maintained.

Draw a block diagram of WPP substation. State function of each block.

Description : Draw a block diagram of WPP substation. State function of each block.

Last Answer : Block Diagram of WPP Substation: OR Wind Turbine : Converts wind power to rotational mechanical energy Gear Box: Transfer low speed to high. Generator: Converts rotational ... to DC and vice-versa of correct frequency. Transformer: Step up the voltage to grid level.

List various types of generators used in WPP.

Description : List various types of generators used in WPP.

Last Answer : Various Types of Generators Used in WPP: 1. Squirrel Cage Induction Generator ( SCIG ) 2. Wound Rotor Induction Generator ( WRIG ) 3. Doubly Fed Induction Generator ( DFIG ) 4. Wound Rotor synchronous Generator ( WRSG) 5. Permanent Magnet Synchronous Generator ( PMSG)

List any four towers related to WPP. Explain any one in brief.

Description : List any four towers related to WPP. Explain any one in brief.

Last Answer : List of Towers Related to WPP: Tubular Steel / concrete Tower Lattice Tower Guyed Pole Tower Hybrid Tower 1. Tubular steel tower: Generally used for a large wind turbine and normally manufactured in ... type tower and thin, tall lattice type tower in the middle instead of single pole.

How can I reduce aerodynamic lift in my Honda Integra?

Description : How can I reduce aerodynamic lift in my Honda Integra?

Last Answer : answer:I thought the Integra was an Acura? I know Acura is Honda's sister company, and many of the vehicles are built on the same chassis, like Audi/VW, Infiniti/Nissan, Lexus/Toyota, Lincoln/Ford ... considered lowering just the front wheels? Or is there a mechanical reason that isn't a good idea?

Which has more aerodynamic drag, an auto or a bicycle?

Description : Which has more aerodynamic drag, an auto or a bicycle?

Last Answer : If in free fall together, the bicyle might reach the ground sooner because of its relatively less wind resistance. In a vacuum, they would both reach bottom at the same time, according to the ... less than 40 pounds. The rolling resistance at the start should be much less for the bicycle.

What are the aerodynamic mechanics of how a gazelle runs and changes direction?

Description : What are the aerodynamic mechanics of how a gazelle runs and changes direction?

Last Answer : Here is one document.

How do Bee's fly. I remember hearing, they are not aerodynamic has anyone else heard this?

Description : How do Bee's fly. I remember hearing, they are not aerodynamic has anyone else heard this?

Last Answer : Go on wikipedia and search. I’m nearly positive that bees defy the laws of flight. I would give you a link to the wikipedia page but I am on my iPod (no cut and paste feature)

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Description : Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Last Answer : Direct Drive SWT: This plant has no gear box. Turbine blades are very light weight made up of stiff carbon fibre material. Blades are flat shaped. Due to this shape, lift increases. ... needed is less 4. More reliable 5. Better performance 6. Light weight 7. Less maintenance

Name any two power electronic components in SWT.

Description : Name any two power electronic components in SWT.

Last Answer : Power Electronic Components in SWT: Boost converter Buck converter Buck Boost converter Cuk converter Voltage Source Inverter Current Source Inverter

Give the classification of SWT on any two factors.

Description : Give the classification of SWT on any two factors.

Last Answer : Classification of SWT: According to axis of rotor 1. Horizontal axis wind turbine 2. Vertical axis wind turbine According to direction 1. Up wind 2. Down wind According to number of blades 1 ... 1. Constant speed 2. Variable speed According to drive 1. Direct Drive 2. Geared Drive

List any two advantages of vertical axis WPPs.

Description : List any two advantages of vertical axis WPPs.

Last Answer : Advantages of Vertical Axis WPPs: They can produce electricity in any wind direction. Low production cost as compared to horizontal axis wind turbine. Easy construction. Low maintenance ... weather conditions. Variable speed operation. Yaw and pitch control mechanism are not needed.

Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Description : Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Last Answer : Preventive maintenance schedule for SWT: I. Oiling and greasing: 1) Checking geared motor oil, greasing, lubrication and maintenance of drive train. 2) Changing oil, belts, bearing lubrication. 3 ... tower. 3) Every 6 months inspection for loop condition, safety norms, tower surface.

Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Description : Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Last Answer : i) Wind Speed : Anemometer. ii) RPM of Generator Shaft: Accelerometers. iii) Temperature in Generator: Thermistor, thermocouple, RTD. iv) Cable Untwisting : Cable Twisting sensor. v) Vibration : Accelerometer, piezoelectric. vi) Wind direction: Wind vane.

List any four mechanical and electrical faults in SWT.

Description : List any four mechanical and electrical faults in SWT.

Last Answer : Mechanical Faults in SWT: 1. Bearing and gearbox issue 2. Blade design , manufacturing, installation issue 3. Mechanical break down 4. Hydraulic failure 5. Nacelle ... failure, power regulator failure 12. Torque reversal due occasional connecting and disconnecting generator to grid

Recommend with justification the generators used in SWT.

Description : Recommend with justification the generators used in SWT.

Last Answer : 1. Fixed Speed Induction Generator: This is squirrel cage induction generator for fixed speed. This is 1) reliable 2) self-starting 3) easy to adjust 4) have low maintenance.  2. ... optimizes use of given grid capacities 6) Better cooling performance 7) Reduced noise level of moving parts.

Describe the general maintenance issues of the horizontal axis WPPs.

Description : Describe the general maintenance issues of the horizontal axis WPPs.

Last Answer : General Maintenance Issues of Horizontal Axis WPPs:  1. Gearbox failure.  2. Misalignment between generator and gearbox.  3. Problems related to lubrication.  4. Variation among the components by ... charging gear oil, brake pads, filters, bearings, sensors, actuators. 6. Bearing failure issue. 

Name any four main parts of SWT. Give function of each part.

Description : Name any four main parts of SWT. Give function of each part.

Last Answer : Parts of SWT:  1. Rotor - It includes blades for converting wind energy to low speed rotational energy.  2. Gear box - It converts low speed rotational energy to high speed.  3. ... 5. Other Equipment: Control equipment, electric cables, hub, tale vane, sensors, anemometer to implement control.

Explain lift & drag wind energy conversion principle.

Description : Explain lift & drag wind energy conversion principle.

Last Answer : Two primary aerodynamic forces work in wind turbine rotors are:- 1) Lift which acts perpendicular to the direction of wind flow and 2) Drag acts parallel to wind flow. ... aero foil type blade offer better performance and higher rotational speed and make them ideal for power generation.

Prepare maintenance schedule of various actuators used in large wind power plants.

Description : Prepare maintenance schedule of various actuators used in large wind power plants. 

Last Answer : Maintenance Schedule of Various Actuators: Maintenance of Yaw System Actuator: The maintenance of Yaw system actuator is done quarterly or yearly. Following maintenance activities are to be ... , then send alarming signal. 7.Monitor change in temperature, pressure and mechanical stresses. 

State approximate wind power generation in India.

Description : State approximate wind power generation in India.

Last Answer : Wind Power Generation in India: Wind power generation is 20,000 MW to 65,000 MW. As of 31 March 2019 the total installed wind power capacity was 36.625 GW, the fourth largest installed wind power capacity in the world. 

State the factors which affect the nature of the wind close to the surface of the earth.

Description : State the factors which affect the nature of the wind close to the surface of the earth.

Last Answer : Factors Which Affect the Nature of the Wind Close to the Surface of the Earth: Horizontal pressure (gradient) Rotation of earth (coriolis force) Centripetal acceleration Frictional forces