Name any two power electronic components in SWT.

Name any two power electronic components in SWT.
by

1 Answer

Answer :

Power Electronic Components in SWT:

 Boost converter

 Buck converter

 Buck Boost converter

 Cuk converter

 Voltage Source Inverter

 Current Source Inverter
by

Related questions

Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Description : Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Last Answer : Preventive maintenance schedule for SWT: I. Oiling and greasing: 1) Checking geared motor oil, greasing, lubrication and maintenance of drive train. 2) Changing oil, belts, bearing lubrication. 3 ... tower. 3) Every 6 months inspection for loop condition, safety norms, tower surface.

Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Description : Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Last Answer : Direct Drive SWT: This plant has no gear box. Turbine blades are very light weight made up of stiff carbon fibre material. Blades are flat shaped. Due to this shape, lift increases. ... needed is less 4. More reliable 5. Better performance 6. Light weight 7. Less maintenance

Give the classification of SWT on any two factors.

Description : Give the classification of SWT on any two factors.

Last Answer : Classification of SWT: According to axis of rotor 1. Horizontal axis wind turbine 2. Vertical axis wind turbine According to direction 1. Up wind 2. Down wind According to number of blades 1 ... 1. Constant speed 2. Variable speed According to drive 1. Direct Drive 2. Geared Drive

List any four mechanical and electrical faults in SWT.

Description : List any four mechanical and electrical faults in SWT.

Last Answer : Mechanical Faults in SWT: 1. Bearing and gearbox issue 2. Blade design , manufacturing, installation issue 3. Mechanical break down 4. Hydraulic failure 5. Nacelle ... failure, power regulator failure 12. Torque reversal due occasional connecting and disconnecting generator to grid

Recommend with justification the generators used in SWT.

Description : Recommend with justification the generators used in SWT.

Last Answer : 1. Fixed Speed Induction Generator: This is squirrel cage induction generator for fixed speed. This is 1) reliable 2) self-starting 3) easy to adjust 4) have low maintenance.  2. ... optimizes use of given grid capacities 6) Better cooling performance 7) Reduced noise level of moving parts.

Name any four main parts of SWT. Give function of each part.

Description : Name any four main parts of SWT. Give function of each part.

Last Answer : Parts of SWT:  1. Rotor - It includes blades for converting wind energy to low speed rotational energy.  2. Gear box - It converts low speed rotational energy to high speed.  3. ... 5. Other Equipment: Control equipment, electric cables, hub, tale vane, sensors, anemometer to implement control.

Identify & explain any two difficulties faced while connecting WPP to the power grid.

Description : Identify & explain any two difficulties faced while connecting WPP to the power grid.

Last Answer : Difficulties Faced while Connecting WPP to Power Grid: There are several technical issues associated with grid connected systems like power quality issues, power and voltage fluctuations, storage, protection ... that is out of phase with grid voltage and so provide power factor correction.

Prepare maintenance schedule of various actuators used in large wind power plants.

Description : Prepare maintenance schedule of various actuators used in large wind power plants. 

Last Answer : Maintenance Schedule of Various Actuators: Maintenance of Yaw System Actuator: The maintenance of Yaw system actuator is done quarterly or yearly. Following maintenance activities are to be ... , then send alarming signal. 7.Monitor change in temperature, pressure and mechanical stresses. 

State approximate wind power generation in India.

Description : State approximate wind power generation in India.

Last Answer : Wind Power Generation in India: Wind power generation is 20,000 MW to 65,000 MW. As of 31 March 2019 the total installed wind power capacity was 36.625 GW, the fourth largest installed wind power capacity in the world. 

Identify any two weekly maintenance activities for WPP.

Description : Identify any two weekly maintenance activities for WPP.

Last Answer : Weekly Maintenance Activities: Routine checkup, monitoring, periodic reports. Blade cleaning. Higher voltage equipment maintenance. Turbines require periodic lubrication, oil changes. Bolt and electrical ... . Machine should be checked for corrosion. Check guy wire for proper tension.

Name any two aerodynamic controls for WPP.

Description : Name any two aerodynamic controls for WPP.

Last Answer : Aerodynamic Control for WPP: Pitch control Passive stall control Active stall control Yaw control

List any two advantages of vertical axis WPPs.

Description : List any two advantages of vertical axis WPPs.

Last Answer : Advantages of Vertical Axis WPPs: They can produce electricity in any wind direction. Low production cost as compared to horizontal axis wind turbine. Easy construction. Low maintenance ... weather conditions. Variable speed operation. Yaw and pitch control mechanism are not needed.

Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Description : Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Last Answer : Scheduled Maintenance of Stall Pitch: In scheduled maintenance of stall pitch, following maintenance activities are performed quarterly or yearly basis: 1. Grease the cable, which pulls the blade ... battery. In case of power failure, batteries will ensure the movement of blade to safe position.

Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Description : Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Last Answer : Braking Mechanism For The Large WPP: 1. Furling Mechanism: Furling allows the whole set of blades to change its position and blades turned away from wind, if wind speed is beyond safety limit. It ... 1.To harness optimum power from wind 2.To protect turbine in case of high wind speed.

Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Description : Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Last Answer : i) Wind Speed : Anemometer. ii) RPM of Generator Shaft: Accelerometers. iii) Temperature in Generator: Thermistor, thermocouple, RTD. iv) Cable Untwisting : Cable Twisting sensor. v) Vibration : Accelerometer, piezoelectric. vi) Wind direction: Wind vane.

Describe the general maintenance issues of the horizontal axis WPPs.

Description : Describe the general maintenance issues of the horizontal axis WPPs.

Last Answer : General Maintenance Issues of Horizontal Axis WPPs:  1. Gearbox failure.  2. Misalignment between generator and gearbox.  3. Problems related to lubrication.  4. Variation among the components by ... charging gear oil, brake pads, filters, bearings, sensors, actuators. 6. Bearing failure issue. 

Related to WPP define following wind speeds

Description : Related to WPP define following wind speeds  i) Cut in  ii) Cut out iii) Survival iv) Threshold

Last Answer : i) Cut-in wind speed: This is the minimum wind speed at which the turbine blades overcome friction and begin to rotate.  ii) Cut out speed: This is the speed at which the turbine ... this range, it is ensured that available energy is above the minimum threshold and structural health is maintained.

Explain lift & drag wind energy conversion principle.

Description : Explain lift & drag wind energy conversion principle.

Last Answer : Two primary aerodynamic forces work in wind turbine rotors are:- 1) Lift which acts perpendicular to the direction of wind flow and 2) Drag acts parallel to wind flow. ... aero foil type blade offer better performance and higher rotational speed and make them ideal for power generation.

Draw a block diagram of WPP substation. State function of each block.

Description : Draw a block diagram of WPP substation. State function of each block.

Last Answer : Block Diagram of WPP Substation: OR Wind Turbine : Converts wind power to rotational mechanical energy Gear Box: Transfer low speed to high. Generator: Converts rotational ... to DC and vice-versa of correct frequency. Transformer: Step up the voltage to grid level.

List various types of generators used in WPP.

Description : List various types of generators used in WPP.

Last Answer : Various Types of Generators Used in WPP: 1. Squirrel Cage Induction Generator ( SCIG ) 2. Wound Rotor Induction Generator ( WRIG ) 3. Doubly Fed Induction Generator ( DFIG ) 4. Wound Rotor synchronous Generator ( WRSG) 5. Permanent Magnet Synchronous Generator ( PMSG)

List any four towers related to WPP. Explain any one in brief.

Description : List any four towers related to WPP. Explain any one in brief.

Last Answer : List of Towers Related to WPP: Tubular Steel / concrete Tower Lattice Tower Guyed Pole Tower Hybrid Tower 1. Tubular steel tower: Generally used for a large wind turbine and normally manufactured in ... type tower and thin, tall lattice type tower in the middle instead of single pole.

State the factors which affect the nature of the wind close to the surface of the earth.

Description : State the factors which affect the nature of the wind close to the surface of the earth.

Last Answer : Factors Which Affect the Nature of the Wind Close to the Surface of the Earth: Horizontal pressure (gradient) Rotation of earth (coriolis force) Centripetal acceleration Frictional forces

List two causes of damage to ESD-sensitive electronic components

Description : List two causes of damage to ESD-sensitive electronic components

Last Answer : Esd, improper stowage, and improper handling.

What is the meaning of the different symbols and abbreviations found on the documents that they use (such as surface finish to be achieved linear and geometric tolerances electronic components weld s?

Description : What is the meaning of the different symbols and abbreviations found on the documents that they use (such as surface finish to be achieved linear and geometric tolerances electronic components weld s?

Last Answer : Need answer

Following IC chip integrates 100 thousands electronic components per chip A) SSI B) MSI C) LSI D) VLSI

Description : Following IC chip integrates 100 thousands electronic components per chip A) SSI B) MSI C) LSI D) VLSI

Last Answer : Answer : C

A computer has very low failure rate because it uses electronic components. It produces very consistent results. This is highlighted by which of the feature of computer? A) Accuracy B) Reliability C) Versatility D) Automatic

Description : A computer has very low failure rate because it uses electronic components. It produces very consistent results. This is highlighted by which of the feature of computer? A) Accuracy B) Reliability C) Versatility D) Automatic

Last Answer : Answer : B

A thin plate or board that contains electronic components is called ___________ A. Hard Disk B. RAM C. ROM D. Circuit Board

Description : A thin plate or board that contains electronic components is called ___________ A. Hard Disk B. RAM C. ROM D. Circuit Board

Last Answer : D. Circuit Board

Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Description : Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Last Answer : Answer: B

Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent short circuiting. B. only be connected to multimeter on the ammeter setting C. be short circuited D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Description : Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent ... D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Last Answer : Answer: C

When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent mechanical damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Description : When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent ... damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Last Answer : Answer: D

Which of the following statements describes the significance of ambient temperature in relation to the service life of electronic components? A. Ambient temperature should be as high as possible to drive off moisture. B. Increased ambient temperature decreases the service life of electronic components. C. Ambient temperature is not significant as long as the relative humidity is kept low. D. A reduced ambient temperature causes a corresponding reduced service life.

Description : Which of the following statements describes the significance of ambient temperature in relation to the service life of electronic components? A. Ambient temperature should be as high as possible to drive ... is kept low. D. A reduced ambient temperature causes a corresponding reduced service life.

Last Answer : Answer: B

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

A complete electronic circuit with transistors and other electronic components on a small silicon chip is called a(n) a) workstation b) CPU c) magnetic disk d) integrated circuit e) None of these

Description : A complete electronic circuit with transistors and other electronic components on a small silicon chip is called a(n) a) workstation b) CPU c) magnetic disk d) integrated circuit e) None of these

Last Answer : d) integrated circuit

A kiosk a) is data organised and presented in a manner that has additional value beyond t he value of the data itself b) combines microscopic electronic components on a single integrated circuit that processes bits according to software instructions c) is a computer station that provides the public with specific and useful information and service d) describes a computer's type, processor, and operating system e) None of these

Description : A kiosk a) is data organised and presented in a manner that has additional value beyond t he value of the data itself b) combines microscopic electronic components on a single integrated circuit that ... and service d) describes a computer's type, processor, and operating system e) None of these

Last Answer : c) is a computer station that provides the public with specific and useful information and service

These are main components of Electronic Stability control system a) Speed Sensor b) Steering angle measurement angle c) Yaw-rate sensor d) All of the above

Description : These are main components of Electronic Stability control system a) Speed Sensor b) Steering angle measurement angle c) Yaw-rate sensor d) All of the above

Last Answer : d) All of the above

_________ allows us to control electronic components a) RETful API b) RESTful API c) HTTP

Description : _________ allows us to control electronic components a) RETful API b) RESTful API c) HTTP

Last Answer : a) RETful API

Describe the process of photo emission. State the application of photo emission in electronic components

Description : Describe the process of photo emission. State the application of photo emission in electronic components

Last Answer : Process of Photoemission:when light of appropriate frequency and intensity is incident upon a surface of certain materials,the energy of light is given to electrons to leave the surface of metal ... photo tubes are used in door openers,counters, position and temperature control and colour analysis