List any two advantages of vertical axis WPPs.

List any two advantages of vertical axis WPPs.
by

1 Answer

Answer :

Advantages of Vertical Axis WPPs:

 They can produce electricity in any wind direction.

 Low production cost as compared to horizontal axis wind turbine.

 Easy construction.

 Low maintenance cost and transportation cost.

 Suitable for areas with extreme weather conditions.

 Variable speed operation.

 Yaw and pitch control mechanism are not needed.
by

Related questions

Describe the general maintenance issues of the horizontal axis WPPs.

Description : Describe the general maintenance issues of the horizontal axis WPPs.

Last Answer : General Maintenance Issues of Horizontal Axis WPPs:  1. Gearbox failure.  2. Misalignment between generator and gearbox.  3. Problems related to lubrication.  4. Variation among the components by ... charging gear oil, brake pads, filters, bearings, sensors, actuators. 6. Bearing failure issue. 

Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Description : Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Last Answer : Direct Drive SWT: This plant has no gear box. Turbine blades are very light weight made up of stiff carbon fibre material. Blades are flat shaped. Due to this shape, lift increases. ... needed is less 4. More reliable 5. Better performance 6. Light weight 7. Less maintenance

List any four mechanical and electrical faults in SWT.

Description : List any four mechanical and electrical faults in SWT.

Last Answer : Mechanical Faults in SWT: 1. Bearing and gearbox issue 2. Blade design , manufacturing, installation issue 3. Mechanical break down 4. Hydraulic failure 5. Nacelle ... failure, power regulator failure 12. Torque reversal due occasional connecting and disconnecting generator to grid

List various types of generators used in WPP.

Description : List various types of generators used in WPP.

Last Answer : Various Types of Generators Used in WPP: 1. Squirrel Cage Induction Generator ( SCIG ) 2. Wound Rotor Induction Generator ( WRIG ) 3. Doubly Fed Induction Generator ( DFIG ) 4. Wound Rotor synchronous Generator ( WRSG) 5. Permanent Magnet Synchronous Generator ( PMSG)

List any four towers related to WPP. Explain any one in brief.

Description : List any four towers related to WPP. Explain any one in brief.

Last Answer : List of Towers Related to WPP: Tubular Steel / concrete Tower Lattice Tower Guyed Pole Tower Hybrid Tower 1. Tubular steel tower: Generally used for a large wind turbine and normally manufactured in ... type tower and thin, tall lattice type tower in the middle instead of single pole.

Give the four advantages of vertical axis wind mills.

Last Answer : Advantages of vertical axis wind mills: 1. Simple blade design 2. Low cost of fabrication. 3. No yaw controller required. 4. Easy maintenance because ground mounted generator and gear box. 

Identify & explain any two difficulties faced while connecting WPP to the power grid.

Description : Identify & explain any two difficulties faced while connecting WPP to the power grid.

Last Answer : Difficulties Faced while Connecting WPP to Power Grid: There are several technical issues associated with grid connected systems like power quality issues, power and voltage fluctuations, storage, protection ... that is out of phase with grid voltage and so provide power factor correction.

Name any two power electronic components in SWT.

Description : Name any two power electronic components in SWT.

Last Answer : Power Electronic Components in SWT: Boost converter Buck converter Buck Boost converter Cuk converter Voltage Source Inverter Current Source Inverter

Give the classification of SWT on any two factors.

Description : Give the classification of SWT on any two factors.

Last Answer : Classification of SWT: According to axis of rotor 1. Horizontal axis wind turbine 2. Vertical axis wind turbine According to direction 1. Up wind 2. Down wind According to number of blades 1 ... 1. Constant speed 2. Variable speed According to drive 1. Direct Drive 2. Geared Drive

Identify any two weekly maintenance activities for WPP.

Description : Identify any two weekly maintenance activities for WPP.

Last Answer : Weekly Maintenance Activities: Routine checkup, monitoring, periodic reports. Blade cleaning. Higher voltage equipment maintenance. Turbines require periodic lubrication, oil changes. Bolt and electrical ... . Machine should be checked for corrosion. Check guy wire for proper tension.

Name any two aerodynamic controls for WPP.

Description : Name any two aerodynamic controls for WPP.

Last Answer : Aerodynamic Control for WPP: Pitch control Passive stall control Active stall control Yaw control

Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Description : Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Last Answer : Preventive maintenance schedule for SWT: I. Oiling and greasing: 1) Checking geared motor oil, greasing, lubrication and maintenance of drive train. 2) Changing oil, belts, bearing lubrication. 3 ... tower. 3) Every 6 months inspection for loop condition, safety norms, tower surface.

Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Description : Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Last Answer : Scheduled Maintenance of Stall Pitch: In scheduled maintenance of stall pitch, following maintenance activities are performed quarterly or yearly basis: 1. Grease the cable, which pulls the blade ... battery. In case of power failure, batteries will ensure the movement of blade to safe position.

Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Description : Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Last Answer : Braking Mechanism For The Large WPP: 1. Furling Mechanism: Furling allows the whole set of blades to change its position and blades turned away from wind, if wind speed is beyond safety limit. It ... 1.To harness optimum power from wind 2.To protect turbine in case of high wind speed.

Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Description : Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Last Answer : i) Wind Speed : Anemometer. ii) RPM of Generator Shaft: Accelerometers. iii) Temperature in Generator: Thermistor, thermocouple, RTD. iv) Cable Untwisting : Cable Twisting sensor. v) Vibration : Accelerometer, piezoelectric. vi) Wind direction: Wind vane.

Recommend with justification the generators used in SWT.

Description : Recommend with justification the generators used in SWT.

Last Answer : 1. Fixed Speed Induction Generator: This is squirrel cage induction generator for fixed speed. This is 1) reliable 2) self-starting 3) easy to adjust 4) have low maintenance.  2. ... optimizes use of given grid capacities 6) Better cooling performance 7) Reduced noise level of moving parts.

Related to WPP define following wind speeds

Description : Related to WPP define following wind speeds  i) Cut in  ii) Cut out iii) Survival iv) Threshold

Last Answer : i) Cut-in wind speed: This is the minimum wind speed at which the turbine blades overcome friction and begin to rotate.  ii) Cut out speed: This is the speed at which the turbine ... this range, it is ensured that available energy is above the minimum threshold and structural health is maintained.

Name any four main parts of SWT. Give function of each part.

Description : Name any four main parts of SWT. Give function of each part.

Last Answer : Parts of SWT:  1. Rotor - It includes blades for converting wind energy to low speed rotational energy.  2. Gear box - It converts low speed rotational energy to high speed.  3. ... 5. Other Equipment: Control equipment, electric cables, hub, tale vane, sensors, anemometer to implement control.

Explain lift & drag wind energy conversion principle.

Description : Explain lift & drag wind energy conversion principle.

Last Answer : Two primary aerodynamic forces work in wind turbine rotors are:- 1) Lift which acts perpendicular to the direction of wind flow and 2) Drag acts parallel to wind flow. ... aero foil type blade offer better performance and higher rotational speed and make them ideal for power generation.

Draw a block diagram of WPP substation. State function of each block.

Description : Draw a block diagram of WPP substation. State function of each block.

Last Answer : Block Diagram of WPP Substation: OR Wind Turbine : Converts wind power to rotational mechanical energy Gear Box: Transfer low speed to high. Generator: Converts rotational ... to DC and vice-versa of correct frequency. Transformer: Step up the voltage to grid level.

Prepare maintenance schedule of various actuators used in large wind power plants.

Description : Prepare maintenance schedule of various actuators used in large wind power plants. 

Last Answer : Maintenance Schedule of Various Actuators: Maintenance of Yaw System Actuator: The maintenance of Yaw system actuator is done quarterly or yearly. Following maintenance activities are to be ... , then send alarming signal. 7.Monitor change in temperature, pressure and mechanical stresses. 

State approximate wind power generation in India.

Description : State approximate wind power generation in India.

Last Answer : Wind Power Generation in India: Wind power generation is 20,000 MW to 65,000 MW. As of 31 March 2019 the total installed wind power capacity was 36.625 GW, the fourth largest installed wind power capacity in the world. 

State the factors which affect the nature of the wind close to the surface of the earth.

Description : State the factors which affect the nature of the wind close to the surface of the earth.

Last Answer : Factors Which Affect the Nature of the Wind Close to the Surface of the Earth: Horizontal pressure (gradient) Rotation of earth (coriolis force) Centripetal acceleration Frictional forces

A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the (a) axis of load (b) perpendicular to the axis of load (c) maximum moment of inertia (d) minimum moment of inertia

Description : A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the (a) axis of load (b) perpendicular to the axis of load (c) maximum moment of inertia (d) minimum moment of inertia

Last Answer : (d) minimum moment of inertia

For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : Na

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

A long solenoid carrying a current I is placed with its axis vertical as shown in the figure. A particle of mass m and charge q is released from the t

Description : A long solenoid carrying a current I is placed with its axis vertical as shown in the figure. A particle of mass m and charge q is released from the t

Last Answer : A long solenoid carrying a current I is placed with its axis vertical as shown in the figure. A particle of ... than g C. equal to g D. None of these

What is Plotted on the vertical or y axis?

Description : What is Plotted on the vertical or y axis?

Last Answer : the thing that you are measuring is usually plotted on the Yaxis . the X axis is usually time scale

What is measured on a vertical axis what is measured on a horizontal axis?

Description : What is measured on a vertical axis what is measured on a horizontal axis?

Last Answer : If one of the two variables is independent (or explanatory) thenit goes on the horizontal axis. Otherwise you do whatever youlike.

Which set of ordered pairs represents a vertical reflection (over the x-axis) A. (5, –1) to (–5, –1) B. (–2, –3) to (–2, 3) C. (–1, –5) to (1, 5) D. (3, –2) to (–3, –2)?

Description : Which set of ordered pairs represents a vertical reflection (over the x-axis) A. (5, –1) to (–5, –1) B. (–2, –3) to (–2, 3) C. (–1, –5) to (1, 5) D. (3, –2) to (–3, –2)?

Last Answer : help me plz

The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side

Description : The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side

Last Answer : Answer: B

The dry-bulb temperature scale is read on a psychrometric chart along the: a. Left vertical axis b. Right vertical axis c. Saturation line and sloping downward to the right d. Top horizontal axis e. Horizontal axis on the bottom of the chart

Description : The dry-bulb temperature scale is read on a psychrometric chart along the: a. Left vertical axis b. Right vertical axis c. Saturation line and sloping downward to the right d. Top horizontal axis e. Horizontal axis on the bottom of the chart

Last Answer : ANSWER : E

In BCG Matrix, what is the label of the Vertical axis? a. Relative Market share b. Business Strength c. Industry Growth Rate d. Market Growth Rate

Description : In BCG Matrix, what is the label of the Vertical axis? a. Relative Market share b. Business Strength c. Industry Growth Rate d. Market Growth Rate

Last Answer : Industry Growth Rate

For a fluid rotating at constant angular velocity about vertical axis as a rigid body, the pressure intensity varies as the (A) Square of the radial distance (B) Radial distance linearly (C) Inverse of the radial distance(D) Elevation along vertical direction

Description : For a fluid rotating at constant angular velocity about vertical axis as a rigid body, the pressure intensity varies as the (A) Square of the radial distance (B) Radial distance linearly (C) Inverse of the radial distance (D) Elevation along vertical direction

Last Answer : (A) Square of the radial distance

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Description : The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Last Answer : (C) Dip

If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Description : If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Last Answer : (A) f/i

The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Description : The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Last Answer : (B) 0.4775 Q/Z²

When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distanceB) Increases linearly as its radial distance (C) Increases as the square of the radial distance (D) Decreases as the square of the radial distance

Description : When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distance B) Increases linearly as ... as the square of the radial distance (D) Decreases as the square of the radial distance

Last Answer : Answer: Option A

Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Description : Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Last Answer : C

When aligning the trace with a short applied to channel A, which control should be adjusted to bring the trace parallel to the vertical axis?

Description : When aligning the trace with a short applied to channel A, which control should be adjusted to bring the trace parallel to the vertical axis?

Last Answer : TRACE ROTATE control.