Identify any two weekly maintenance activities for WPP.

Identify any two weekly maintenance activities for WPP.
by

1 Answer

Answer :

Weekly Maintenance Activities:

 Routine checkup, monitoring, periodic reports.

 Blade cleaning.

 Higher voltage equipment maintenance.

 Turbines require periodic lubrication, oil changes.

 Bolt and electrical connections should be checked and tightened if required.

 All rotating equipment need maintenance.

 Machine should be checked for corrosion.

 Check guy wire for proper tension.
by

Related questions

Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Description : Explain scheduled maintenance of Stall Pitch, Active Pitch controlled of WPP.

Last Answer : Scheduled Maintenance of Stall Pitch: In scheduled maintenance of stall pitch, following maintenance activities are performed quarterly or yearly basis: 1. Grease the cable, which pulls the blade ... battery. In case of power failure, batteries will ensure the movement of blade to safe position.

Identify & explain any two difficulties faced while connecting WPP to the power grid.

Description : Identify & explain any two difficulties faced while connecting WPP to the power grid.

Last Answer : Difficulties Faced while Connecting WPP to Power Grid: There are several technical issues associated with grid connected systems like power quality issues, power and voltage fluctuations, storage, protection ... that is out of phase with grid voltage and so provide power factor correction.

Name any two aerodynamic controls for WPP.

Description : Name any two aerodynamic controls for WPP.

Last Answer : Aerodynamic Control for WPP: Pitch control Passive stall control Active stall control Yaw control

Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Description : Recommend & explain with neat sketch a suitable braking mechanism for the large WPP.

Last Answer : Braking Mechanism For The Large WPP: 1. Furling Mechanism: Furling allows the whole set of blades to change its position and blades turned away from wind, if wind speed is beyond safety limit. It ... 1.To harness optimum power from wind 2.To protect turbine in case of high wind speed.

Related to WPP define following wind speeds

Description : Related to WPP define following wind speeds  i) Cut in  ii) Cut out iii) Survival iv) Threshold

Last Answer : i) Cut-in wind speed: This is the minimum wind speed at which the turbine blades overcome friction and begin to rotate.  ii) Cut out speed: This is the speed at which the turbine ... this range, it is ensured that available energy is above the minimum threshold and structural health is maintained.

Draw a block diagram of WPP substation. State function of each block.

Description : Draw a block diagram of WPP substation. State function of each block.

Last Answer : Block Diagram of WPP Substation: OR Wind Turbine : Converts wind power to rotational mechanical energy Gear Box: Transfer low speed to high. Generator: Converts rotational ... to DC and vice-versa of correct frequency. Transformer: Step up the voltage to grid level.

List various types of generators used in WPP.

Description : List various types of generators used in WPP.

Last Answer : Various Types of Generators Used in WPP: 1. Squirrel Cage Induction Generator ( SCIG ) 2. Wound Rotor Induction Generator ( WRIG ) 3. Doubly Fed Induction Generator ( DFIG ) 4. Wound Rotor synchronous Generator ( WRSG) 5. Permanent Magnet Synchronous Generator ( PMSG)

List any four towers related to WPP. Explain any one in brief.

Description : List any four towers related to WPP. Explain any one in brief.

Last Answer : List of Towers Related to WPP: Tubular Steel / concrete Tower Lattice Tower Guyed Pole Tower Hybrid Tower 1. Tubular steel tower: Generally used for a large wind turbine and normally manufactured in ... type tower and thin, tall lattice type tower in the middle instead of single pole.

Explain the activities carried out during weekly maintenance of 3 ph. Induction motor.

Description : Explain the activities carried out during weekly maintenance of 3 ph. Induction motor. 

Last Answer : Activities Carried out During Weekly Maintenance of 3 ph. Induction Motor:  1) Check belt tension. In cases where this is excessive it should immediately be reduces and in the case of sleeve ... and cooled by oil mist systems its important to check the oil mist flow paths/pressure components.

Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Description : Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Last Answer : Preventive maintenance schedule for SWT: I. Oiling and greasing: 1) Checking geared motor oil, greasing, lubrication and maintenance of drive train. 2) Changing oil, belts, bearing lubrication. 3 ... tower. 3) Every 6 months inspection for loop condition, safety norms, tower surface.

Describe the general maintenance issues of the horizontal axis WPPs.

Description : Describe the general maintenance issues of the horizontal axis WPPs.

Last Answer : General Maintenance Issues of Horizontal Axis WPPs:  1. Gearbox failure.  2. Misalignment between generator and gearbox.  3. Problems related to lubrication.  4. Variation among the components by ... charging gear oil, brake pads, filters, bearings, sensors, actuators. 6. Bearing failure issue. 

Prepare maintenance schedule of various actuators used in large wind power plants.

Description : Prepare maintenance schedule of various actuators used in large wind power plants. 

Last Answer : Maintenance Schedule of Various Actuators: Maintenance of Yaw System Actuator: The maintenance of Yaw system actuator is done quarterly or yearly. Following maintenance activities are to be ... , then send alarming signal. 7.Monitor change in temperature, pressure and mechanical stresses. 

Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Description : Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Last Answer : i) Wind Speed : Anemometer. ii) RPM of Generator Shaft: Accelerometers. iii) Temperature in Generator: Thermistor, thermocouple, RTD. iv) Cable Untwisting : Cable Twisting sensor. v) Vibration : Accelerometer, piezoelectric. vi) Wind direction: Wind vane.

Identify the hormone with its correct matching of source and function. (a) Oxytocin - posterior pituitary, growth and maintenance of mammary glands. (b) Melatonin - pineal gland, regulates the normal rhythm of sleepwake cycle. (c) Progesterone - corpus luteum, stimulation of growth and activities of female secondary sex organs. (d) Atrial natriuretic factor - ventricular wall, increases the blood pressure.

Description : Identify the hormone with its correct matching of source and function. (a) Oxytocin - posterior pituitary, growth and maintenance of mammary glands. (b) Melatonin - pineal gland, regulates the ... sex organs. (d) Atrial natriuretic factor - ventricular wall, increases the blood pressure.

Last Answer : (b) Melatonin - pineal gland, regulates the normal rhythm of sleepwake cycle

Two contributors of electronic console failures are heat and vibration. To combat some of their effects, preventive maintenance procedures should include ______________. A. systematic rotation of circuit cards with those from spares to allow component cooling B. periodic changing or cleaning of console ventilation and control room air conditioning filters C. weekly tightening of console foundation bolts and changing of the air in the control room D. all of the above

Description : Two contributors of electronic console failures are heat and vibration. To combat some of their effects, preventive maintenance procedures should include ______________. A. systematic rotation of circuit cards with those ... bolts and changing of the air in the control room D. all of the above

Last Answer : Answer: B

Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. top off with sulfuric acid as needed D. making certain connections are tight and clean

Description : Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. top off with sulfuric acid as needed D. making certain connections are tight and clean

Last Answer : Answer: D

Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. trickle charging D. replacment when the volts per cell drops below 1.8 VDC

Description : Maintenance of alkaline batteries should include _________. A. checking the electrolyte weekly using a hydrometer B. replacing the electrolyte every 5 years C. trickle charging D. replacment when the volts per cell drops below 1.8 VDC

Last Answer : Answer: C

The glow plugs must be inspected and decarbonized during a) daily maintenance b) weekly maintenance c) periodic maintenance d) seasonal maintenance

Description : The glow plugs must be inspected and decarbonized during a) daily maintenance b) weekly maintenance c) periodic maintenance d) seasonal maintenance

Last Answer : d) seasonal maintenance

Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Description : Explain with neat sketch working of direct drive SWT. Give any two advantages of it over geared type SWT.

Last Answer : Direct Drive SWT: This plant has no gear box. Turbine blades are very light weight made up of stiff carbon fibre material. Blades are flat shaped. Due to this shape, lift increases. ... needed is less 4. More reliable 5. Better performance 6. Light weight 7. Less maintenance

Name any two power electronic components in SWT.

Description : Name any two power electronic components in SWT.

Last Answer : Power Electronic Components in SWT: Boost converter Buck converter Buck Boost converter Cuk converter Voltage Source Inverter Current Source Inverter

Give the classification of SWT on any two factors.

Description : Give the classification of SWT on any two factors.

Last Answer : Classification of SWT: According to axis of rotor 1. Horizontal axis wind turbine 2. Vertical axis wind turbine According to direction 1. Up wind 2. Down wind According to number of blades 1 ... 1. Constant speed 2. Variable speed According to drive 1. Direct Drive 2. Geared Drive

List any two advantages of vertical axis WPPs.

Description : List any two advantages of vertical axis WPPs.

Last Answer : Advantages of Vertical Axis WPPs: They can produce electricity in any wind direction. Low production cost as compared to horizontal axis wind turbine. Easy construction. Low maintenance ... weather conditions. Variable speed operation. Yaw and pitch control mechanism are not needed.

List any four mechanical and electrical faults in SWT.

Description : List any four mechanical and electrical faults in SWT.

Last Answer : Mechanical Faults in SWT: 1. Bearing and gearbox issue 2. Blade design , manufacturing, installation issue 3. Mechanical break down 4. Hydraulic failure 5. Nacelle ... failure, power regulator failure 12. Torque reversal due occasional connecting and disconnecting generator to grid

Recommend with justification the generators used in SWT.

Description : Recommend with justification the generators used in SWT.

Last Answer : 1. Fixed Speed Induction Generator: This is squirrel cage induction generator for fixed speed. This is 1) reliable 2) self-starting 3) easy to adjust 4) have low maintenance.  2. ... optimizes use of given grid capacities 6) Better cooling performance 7) Reduced noise level of moving parts.

Name any four main parts of SWT. Give function of each part.

Description : Name any four main parts of SWT. Give function of each part.

Last Answer : Parts of SWT:  1. Rotor - It includes blades for converting wind energy to low speed rotational energy.  2. Gear box - It converts low speed rotational energy to high speed.  3. ... 5. Other Equipment: Control equipment, electric cables, hub, tale vane, sensors, anemometer to implement control.

Explain lift & drag wind energy conversion principle.

Description : Explain lift & drag wind energy conversion principle.

Last Answer : Two primary aerodynamic forces work in wind turbine rotors are:- 1) Lift which acts perpendicular to the direction of wind flow and 2) Drag acts parallel to wind flow. ... aero foil type blade offer better performance and higher rotational speed and make them ideal for power generation.

State approximate wind power generation in India.

Description : State approximate wind power generation in India.

Last Answer : Wind Power Generation in India: Wind power generation is 20,000 MW to 65,000 MW. As of 31 March 2019 the total installed wind power capacity was 36.625 GW, the fourth largest installed wind power capacity in the world. 

State the factors which affect the nature of the wind close to the surface of the earth.

Description : State the factors which affect the nature of the wind close to the surface of the earth.

Last Answer : Factors Which Affect the Nature of the Wind Close to the Surface of the Earth: Horizontal pressure (gradient) Rotation of earth (coriolis force) Centripetal acceleration Frictional forces

How do you obtain and interpret drawings and other documents needed for the maintenance activities?

Description : How do you obtain and interpret drawings and other documents needed for the maintenance activities?

Last Answer : Feel Free to Answer

Why is it important to wear protective clothing and use other appropriate safety equipment during the maintenance activities?

Description : Why is it important to wear protective clothing and use other appropriate safety equipment during the maintenance activities?

Last Answer : Feel Free to Answer

What Are The Controlling Activities Of Maintenance Management Include?

Description : What Are The Controlling Activities Of Maintenance Management Include?

Last Answer : Controlling activities of maintenance management include the following: 1. Work Control 2. Inventory Control 3. Cost Control 4. Quality Control. Work control is done using work order ... Control is done by the supervision and testing final outcomes following a predetermined control procedure.

State True or False. i) Master Development Plan basically is a schedule of various applications to be comprised. ii) It consists of start and finish dates of a system analysis, design implementation and maintenance activities. A) i-True, ii-True B) i-False, ii-True C) i-True, ii-False D) i-False, ii-False

Description : State True or False. i) Master Development Plan basically is a schedule of various applications to be comprised. ii) It consists of start and finish dates of a system analysis, design implementation and maintenance activities. ... B) i-False, ii-True C) i-True, ii-False D) i-False, ii-False

Last Answer : A) i-True, ii-True

Explain a. the activities of software maintenance. b. key process areas of CMM.

Description : Explain a. the activities of software maintenance. b. key process areas of CMM.

Last Answer : Ans: a) Software maintenance is a broad activity that includes error correction, enhancement of capabilities, deletion of obsolete capabilities and optimization. b) Key process areas of CMM ... management which establishes and maintains the integrity of the products throughout the life cycle.

The ____________________ and ____________________ manage the supplier relations, monitor the vendor activities and manage the supplier quality in an organisation. A. Supplier management, customisation processes B. Supplier maintenance, control processes C. Supplier management, control processes D. Supplier maintenance, customisation processes

Description : The ____________________ and ____________________ manage the supplier relations, monitor the vendor activities and manage the supplier quality in an organisation. A. Supplier management, ... processes C. Supplier management, control processes D. Supplier maintenance, customisation processes

Last Answer : C. Supplier management, control processes

Identify the part of brain that controls the maintenance of posture, balance and equilibrium.

Description : Identify the part of brain that controls the maintenance of posture, balance and equilibrium.

Last Answer : Cerebellum

Which one of the following is a responsibility of the project steering group/board? a. To identify potential problems for the project team to solve. b. To provide strategic direction and guidance to the sponsor. c. To manage the project team in all daily activities. d. To receive and consider daily reports from team members.

Description : Which one of the following is a responsibility of the project steering group/board? a. To identify potential problems for the project team to solve. b. To provide strategic direction and guidance ... project team in all daily activities. d. To receive and consider daily reports from team members.

Last Answer : b. To provide strategic direction and guidance to the sponsor.

Once the project is approved and moves into the planninb. The total risk on the project typically reduces as activities are performed without loss. c. Risks must be weighed against the potential benefit of the project’s success in order to decide if the project should be chosen. d. Risks are identified with each major group of activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysisg stage, what happens in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded.

Description : Once the project is approved and moves into the planning stage, what happens  in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded. ... activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Last Answer : d. Risks are identified with each major group of activities.

Complete the following statement. As the project progresses into the execution phase: Select one: a. risks need to be checked off on activities that have been performed. b. the total risk on the project typically increases. c. risks are identified with each major group of activities. d. a risk response plan can be used to identify increasing levels of detailed risk analysis. e. the risk breakdown structure needs to be examined to be sure all the risk events have been avoided.

Description : Complete the following statement. As the project progresses into the  execution phase: Select one: a. risks need to be checked off on activities that have been performed. b. the total risk on ... risk breakdown structure needs to be examined to be sure all the risk events have  been avoided.

Last Answer : a. risks need to be checked off on activities that have been performed.

Once the project is approved and moves into the planning stage, what happens in the next phase of the project life cycle?Select one: a. Agreements for risk sharing need to be concluded. b. The total risk on the project typically reduces as activities are performed without loss. c. Risks must be weighed against the potential benefit of the project’s success in order to decide if the project should be chosen. d. Risks are identified with each major group of activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Description : Once the project is approved and moves into the planning stage, what  happens in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded. ... activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Last Answer : d. Risks are identified with each major group of activities.

The methods and regulation used to define goals, plan and monitor tasks and resources, identify and resolve issues, and control costs and budgets for a specific project is known as … a. project management. b. Process Management c. Process d. Activities

Description : The methods and regulation used to define goals, plan and monitor tasks and resources, identify and resolve issues, and control costs and budgets for a specific project is known as … a. project management. b. Process Management c. Process d. Activities

Last Answer : a. project management.

Once the logic of a network is laid out, the project manager will conduct a forward pass and a backward pass through the network. This will provide information regardiC. Resource shortages, high risk activities D. The high risk activities, non-critical pathng ______ and will identify the________. A. The total duration of the project, critical path B. The slack for each activity, high risk activities

Description :  Once the logic of a network is laid out, the project manager will conduct a forward  pass and a backward pass through the network. This will provide information regarding  ______ and will identify ... C. Resource shortages, high risk activities D. The high risk activities, non-critical path

Last Answer : A. The total duration of the project, critical path

Which one of the following is a responsibility of the project steering group/board? a. To identify potential problems for the project team to solve. b. To provide strategic direction and guidance to the sponsor. c. To manage the project team in all daily activities. d. To receive and consider daily reports from team members.

Description : Which one of the following is a responsibility of the project steering group/board?  a. To identify potential problems for the project team to solve.  b. To provide strategic direction and ... project team in all daily activities. d. To receive and consider daily reports from team members.

Last Answer : b. To provide strategic direction and guidance to the sponsor.

A critical path network diagram does NOT: A. Help determine the amount of float B. Identify the particularly important activities C. Calculate earned value D. Calculate the duration of the whole project

Description : A critical path network diagram does NOT: A. Help determine the amount of float B. Identify the particularly important activities C. Calculate earned value D. Calculate the duration of the whole project

Last Answer : C. Calculate earned value

Free float is mainly used to (A) Identify the activities which can be delayed without affecting the total float of preceding activity (B) Identify the activities, which can be delayed without affecting the total float of succeeding activity (C) Establish priorities (D) Identify the activities which can be delayed without affecting the total float of either the preceding or succeeding activities

Description : Free float is mainly used to (A) Identify the activities which can be delayed without affecting the total float of preceding activity (B) Identify the activities, which can be delayed ... which can be delayed without affecting the total float of either the preceding or succeeding activities

Last Answer : (B) Identify the activities, which can be delayed without affecting the total float of succeeding activity

A marketing audit's primary purpose is to A)check on the firm's current marketing position for financial and legal reasons. B)identify weaknesses in ongoing marketing operations and plan the necessary improvements to correct these weaknesses. C)focus on a few of the most important marketing activities and plan the methods to improve them. D)aid evaluation and reallocate the firm's marketing efforts and marketing opportunities.

Description : A marketing audit's primary purpose is to A)check on the firm's current marketing position for financial and legal reasons. B)identify weaknesses in ongoing marketing operations and plan the ... improve them. D)aid evaluation and reallocate the firm's marketing efforts and marketing opportunities.

Last Answer : B)identify weaknesses in ongoing marketing operations and plan the necessary improvements to correct these weaknesses.

The purpose of market segmentation is to: A)differentiate among similar products B)divide the total market to allow the marketer to develop a more precise marketing mix C)reduce the overall cost of marketing activities D)identify a single marketing mix that will be satisfy market segments E)meet the needs of homogeneous markets

Description : The purpose of market segmentation is to: A)differentiate among similar products B)divide the total market to allow the marketer to develop a more precise marketing mix C)reduce the overall ... a single marketing mix that will be satisfy market segments E)meet the needs of homogeneous markets

Last Answer : B)divide the total market to allow the marketer to develop a more precise marketing mix

Which one from the following is highly associated activity of project planning? (A) Keep track of the project progress. (B) Compare actual and planned progress and costs (C) Identify the activities, milestones and deliverables produced by a project (D) Both (B) and (C)

Description : Which one from the following is highly associated activity of project planning? (A) Keep track of the project progress. (B) Compare actual and planned progress and costs (C) Identify the activities, milestones and deliverables produced by a project (D) Both (B) and (C)

Last Answer : (C) Identify the activities, milestones and deliverables produced by a project

What chores do you do (daily/weekly/monthly) to maintain a tidy home?

Description : What chores do you do (daily/weekly/monthly) to maintain a tidy home?

Last Answer : Keep your kitchen clean. Put stuff away when you're done, wipe counters daily, clean out the fridge, do dishes, clean as you go when you cook. Laundry. Keep up with it. For a household of 2 you ... as clean as you can. Also make the bed or at least straighten/smooth the sheets. It sleeps better.