What is the advantage of widlar current source over constant current source?

What is the advantage of widlar current source over constant current source?
by

1 Answer

Answer :

Using constant current source output current of small magnitude(microamp range) is not attainable due to the limitations in chip area. Widlar current source is useful for obtaining small output currents.Sensitivity of widlar current source is less compared to constant current source.
by

Related questions

What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Description : What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Last Answer : C. Much better noise immunity

What is the primary advantage of DSBSC in AM? A. Reduce bandwidth over standard AM B. All of these C. It is simpler to transmit and receive than the standard AM D. No transmitter power is wasted in the carrier

Description : What is the primary advantage of DSBSC in AM? A. Reduce bandwidth over standard AM B. All of these C. It is simpler to transmit and receive than the standard AM D. No transmitter power is wasted in the carrier

Last Answer : D. No transmitter power is wasted in the carrier

Mention the advantages of Wilson current source.

Description : Mention the advantages of Wilson current source.

Last Answer : (i) Provides high output resistance. (ii) Offers low sensitivity to transistor base currents.

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

The advantage of using top loading in a shortened HF vertical antenna is A. lower quality factor B. greater structural strength C. higher losses D. improved radiation efficiency

Description : The advantage of using top loading in a shortened HF vertical antenna is A. lower quality factor B. greater structural strength C. higher losses D. improved radiation efficiency

Last Answer : D. improved radiation efficiency

An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Description : An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Last Answer : C. Immunity to noise

A major and basic advantage for the use of a klystron. A. High power B. Efficiency C. Lesser noise D. Cheaper

Description : A major and basic advantage for the use of a klystron. A. High power B. Efficiency C. Lesser noise D. Cheaper

Last Answer : A. High power

The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Description : The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Last Answer : B. Shorten waveguide link

What is the advantage of sidetone? A. High transmission efficiency B. Results to a strengthened signal C. No energy dissipation D. Assures that the telephone is working

Description : What is the advantage of sidetone? A. High transmission efficiency B. Results to a strengthened signal C. No energy dissipation D. Assures that the telephone is working

Last Answer : D. Assures that the telephone is working

What is the advantage of negative feed back?

Description : What is the advantage of negative feed back?

Last Answer : 1. increased stability 2. Increased bandwidth 3. Decreased noise 4. Less frequency distortion

What is the advantage of monolithic switching regulators?

Description : What is the advantage of monolithic switching regulators?

Last Answer : *Greater efficiency is achieved as the power transistor is made to operate as low impedance switch.Power transmitted across the transistor is in discrete pulses rather than as a steady current flow. * ... frequency can be increased so as to reduce the size and weight of the inductors and capacitors

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

The bending of radio waves passing over the top of a mountain range that disperses a weak portion of the signal behind the mountain is A. eddy-current phase effect B. knife-edge diffraction C. shadowing D. mirror refraction effect

Description : The bending of radio waves passing over the top of a mountain range that disperses a weak portion of the signal behind the mountain is A. eddy-current phase effect B. knife-edge diffraction C. shadowing D. mirror refraction effect

Last Answer : B. knife-edge diffraction

Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode

Description : Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode

Last Answer : b. LED

Is the width of the range of wavelengths emitted by the light source a. Bandwidth b. Chromatic Dispersion c. Spectral width d. Beamwidth

Description : Is the width of the range of wavelengths emitted by the light source a. Bandwidth b. Chromatic Dispersion c. Spectral width d. Beamwidth

Last Answer : c. Spectral width

A noise whose source is within the solar system. A. Solar noise B. Thermal noise C. Cosmic noise D. Johnson Noise

Description : A noise whose source is within the solar system. A. Solar noise B. Thermal noise C. Cosmic noise D. Johnson Noise

Last Answer : A. Solar noise

Which of the following is not a source of industrial noise? A. Automobile ignition B. Sun C. Electric Motors D. Leakage from high voltage line

Description : Which of the following is not a source of industrial noise? A. Automobile ignition B. Sun C. Electric Motors D. Leakage from high voltage line

Last Answer : B. Sun

Indicate the false statement. A. Industrial noise is usually of the impulse type B. Static is caused by lightning discharges in thunderstorms and other natural electric disturbances occurring in the atmosphere C. Distant stars are another source of man-made noise D. Flourescent lights are another source of man-made noise

Description : Indicate the false statement. A. Industrial noise is usually of the impulse type B. Static is caused by lightning discharges in thunderstorms and other natural electric disturbances occurring in the ... another source of man-made noise D. Flourescent lights are another source of man-made noise

Last Answer : C. Distant stars are another source of man-made noise

Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Description : Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Last Answer : B. channel

What optical source radiates light uniformly in all directions? A. Isotropic source B. Lambertian source C. Voltage source D. Ideal source

Description : What optical source radiates light uniformly in all directions? A. Isotropic source B. Lambertian source C. Voltage source D. Ideal source

Last Answer : B. Lambertian source

What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Description : What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Last Answer : C. Loudness

In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Description : In acoustics, _____ is the apparent change in frequency or pitch when a sound source moves either toward or away from a listener. A. flanking B. reverberation C. Doppler effect D. echo

Last Answer : C. Doppler effect

“Each point on a spherical wavefront may be considered a source of secondary spherical wavefronts”. This is known as the A. Snell’s law B. D’Alembert’s principle C. Appleton’s theory D. Huygen’s principle

Description : “Each point on a spherical wavefront may be considered a source of secondary spherical wavefronts”. This is known as the A. Snell’s law B. D’Alembert’s principle C. Appleton’s theory D. Huygen’s principle

Last Answer : D. Huygen’s principle

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Description : Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Last Answer : B. Thermal agitation

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

Any small element of space in the path of a wave may be considered as a source of secondary wavelet. A. De Morgan’s Principle B. Faraday’s Law C. Huygen’s Principle D. Fresnel’s Law of optics

Description : Any small element of space in the path of a wave may be considered as a source of secondary wavelet. A. De Morgan’s Principle B. Faraday’s Law C. Huygen’s Principle D. Fresnel’s Law of optics

Last Answer : C. Huygen’s Principle

If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Description : If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Last Answer : A. 34.61 ns

A non-coherent light source for optical communications system. A. PIN Diode B. ILD C. APD D. LED

Description : A non-coherent light source for optical communications system. A. PIN Diode B. ILD C. APD D. LED

Last Answer : D. LED

A source code whose average word length approaches the fundamental limit set by the entropy of a discrete memoryless source. A. Prefix code B. Huffman code C. Entropy code D. Source code

Description : A source code whose average word length approaches the fundamental limit set by the entropy of a discrete memoryless source. A. Prefix code B. Huffman code C. Entropy code D. Source code

Last Answer : B. Huffman code

If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Description : If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Last Answer : A. 14 ns

It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Description : It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Last Answer : D. Broadside array

What are the limitations in a temperature compensated zener-reference source?

Description : What are the limitations in a temperature compensated zener-reference source?

Last Answer : A power supply voltage of atleast 7 to 10 V is required to place the diode in the breakdown region and that substantial noise is introduced in the circuit by the avalanching diode.

The ratio of speed of light in air to the speed of light in another substance is called the a. Speed factor b. Index of reflection c. Index of refraction d. Dielectric constant

Description : The ratio of speed of light in air to the speed of light in another substance is called the a. Speed factor b. Index of reflection c. Index of refraction d. Dielectric constant

Last Answer : c. Index of refraction

Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day

Description : Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day

Last Answer : B. The location of the antenna with respect to nearby objects

How does the electric field strength of a standard broadcast station vary with the distance from the antenna? A. The field strength of a standard broadcast station vary with the distance from the antenna B. The field strength is directly proportional to the distance from the antenna C. The field strength remains constant regardless of the distance from the antenna D. The field strength varies inversely as the distance from the antenna

Description : How does the electric field strength of a standard broadcast station vary with the distance from the antenna? A. The field strength of a standard broadcast station vary with the distance from ... the distance from the antenna D. The field strength varies inversely as the distance from the antenna

Last Answer : D. The field strength varies inversely as the distance from the antenna

Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Description : Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Last Answer : A. Low-pass filter

The noise output of a resistor is amplified by a noiseless amplifier having a gain of 60 and a bandwidth of 20 kHz. A meter connected at the output of the amplifier reads 1mV RMS. If the bandwidth of the amplifier is reduced to 5kHz, its gain remaining constant, what does the meter read now? A. 0.5 mV B. 0.5 µV C. 5.0 mV D. 5.0 µV

Description : The noise output of a resistor is amplified by a noiseless amplifier having a gain of 60 and a bandwidth of 20 kHz. A meter connected at the output of the amplifier reads 1mV RMS. If the bandwidth of the amplifier is reduced to ... does the meter read now? A. 0.5 mV B. 0.5 µV C. 5.0 mV D. 5.0 µV

Last Answer : A. 0.5 mV

What is the time delay introduced by a 75-ft coaxial cable with a dielectric constant of 2.3? A. 1.54 ns B. 11.5 ns C. 115.6 ns D. 1156 ns

Description : What is the time delay introduced by a 75-ft coaxial cable with a dielectric constant of 2.3? A. 1.54 ns B. 11.5 ns C. 115.6 ns D. 1156 ns

Last Answer : C. 115.6 ns

What is the dielectric constant of polyethylene (PE) insulator? A. 2.5 B. 3.3 C. 2.27 D. 2.1

Description : What is the dielectric constant of polyethylene (PE) insulator? A. 2.5 B. 3.3 C. 2.27 D. 2.1

Last Answer : C. 2.27

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude

Description : A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude

Last Answer : A. Constant peak amplitude

What is the impedance of a balance 4-wire with a diameter of 0.25 cm and spaced 2.5 cm apart using an insulator with a dielectric constant of 2.56? A. 100Ω B. 65Ω C. 75 Ω D. 50 Ω

Description : What is the impedance of a balance 4-wire with a diameter of 0.25 cm and spaced 2.5 cm apart using an insulator with a dielectric constant of 2.56? A. 100Ω B. 65Ω C. 75 Ω D. 50 Ω

Last Answer : A. 100Ω

What is one advantage a primary source has over secondary source?

Description : What is one advantage a primary source has over secondary source?

Last Answer : A secondary source summarizes complex subjects by synthesizing multiple sources.

The advantage of a constant speed propeller over a fixed pitch propeller is: a. Higher maximum thrust available b. Higher maximum efficiency c. More blade surface area available d. Nearly maximum efficiency over wide speed range

Description : The advantage of a constant speed propeller over a fixed pitch propeller is: a. Higher maximum thrust available b. Higher maximum efficiency c. More blade surface area available d. Nearly maximum efficiency over wide speed range

Last Answer : d. Nearly maximum efficiency over wide speed range

Where are the current nodes in a half-wave antenna? A. At the ends B. At the center C. Three-quarters of the way from the feed point toward the end D. One-half of the way from the feed point toward the end

Description : Where are the current nodes in a half-wave antenna? A. At the ends B. At the center C. Three-quarters of the way from the feed point toward the end D. One-half of the way from the feed point toward the end

Last Answer : A. At the ends

If the antenna current is doubled, the field strength at a particular position is A. doubled B. halved C. multiplied by a factor of four D. divided by a factor of four

Description : If the antenna current is doubled, the field strength at a particular position is A. doubled B. halved C. multiplied by a factor of four D. divided by a factor of four

Last Answer : A. doubled

A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground

Description : A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground

Last Answer : C. has a zero DC resistance to ground

A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, what is the antenna current at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Description : A final amplifier of a radio transmitter draws 250 mA of plate current when the plate supply voltage is 1400 volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms, ... at the feed-point? A. 4.0 A B. 2.2 A C. 1.25 A D. 2.0 A

Last Answer : D. 2.0 A