The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

The property by virtue of which metals can be beaten into thin sheets is known as?

A. Ductility

B. Malleability (Answer)
by

1 Answer

Answer :

B. Malleability (Answer)
by

Related questions

The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Description : The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Last Answer : ANSWER: B

The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Last Answer : B) Malleability

The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Last Answer : (d) Malleability

Consider the following statements: 1. Mercury metal exists as a liquid at room temperature. 2. The property of metals by which they can be beaten into thin sheets is called malleability 3. Neutral fats such as butter and vegetable oils are mostly triglycerides. 4. The size of an atom is of the order of 10 - 15 m. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Mercury metal exists as a liquid at room temperature. 2. The property of metals by which they can be beaten into thin sheets is called malleability 3. Neutral fats such as butter and vegetable oils ... b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Last Answer : Ans:(d)

The property of a material by which it can be beaten or rolled into thin plates, is called (A) Malleability (B) Ductility (C) Plasticity (D) Elasticity

Description : The property of a material by which it can be beaten or rolled into thin plates, is called  (A) Malleability  (B) Ductility  (C) Plasticity  (D) Elasticity

Last Answer : (A) Malleability 

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : (A) Lead

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : Option A

The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Description : The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Last Answer : a) malleability

A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Last Answer : (B) Plasticity

Which of the following can be beaten into thin sheets ? [NCERT] -Science

Description : Which of the following can be beaten into thin sheets ? [NCERT] -Science

Last Answer : Zinc Phosphorus Sulphur Oxygen. Zinc.

Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : (1) Brittleness Explanation: An important physical property of non metals is that they are brittle and hence cannot be beaten into sheets or drawn into wires. In other words, non-metals are non-malleable and non-ductile. Where stress is applied on nonmetals, they shatter into pieces.

The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Description : The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Last Answer : (b) Ductility

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Last Answer : (A) Ductility

__________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Description : __________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Last Answer : d. Plasticity

The property by which a body returns to its original shape after removal of the force, is called (A) Plasticity (B) Elasticity (C) Ductility (D) Malleability

Description : The property by which a body returns to its original shape after removal of the force, is called  (A) Plasticity  (B) Elasticity  (C) Ductility  (D) Malleability 

Last Answer : (B) Elasticity 

The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Description : The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Last Answer : (B) Ductility

The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleabilityy

Last Answer : (c) Ductility

Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Description : Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Last Answer : b)conductivity

The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Last Answer : a) Malleability

Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Description : Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Last Answer : (D) Elastic limit close to ultimate breaking strength

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Description : Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Last Answer : (A) Ductility

Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Description : Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Last Answer : (D) Its elastic limit very close to ultimate breaking strength

Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Last Answer : (B) Fluidity & castability

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

Write on ductility and malleability of material.

Description : Write on ductility and malleability of material. 

Last Answer : Ductility Ductility is the ability of a material to deform plastically without fracture under tensile load. Because of this property , materials can be drawn out into fine wire without fracture ... Gold and silver are highly malleable. Malleable metals usually bend and twist in various shapes.

Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : Brittleness

Which of the following cannot be beaten into Sheets? (1) Gold (2) Silver (3) Potassium (4) Aluminium

Description : Which of the following cannot be beaten into Sheets? (1) Gold (2) Silver (3) Potassium (4) Aluminium

Last Answer : (3) Potassium Explanation: Substances that can be beaten into thin sheets are called malleable. Most metals are malleable.

The property by virtue of which lime sets under water, is known as (A) Slacking (B) Setting (C) Hydraulicity (D) Calcining

Description : The property by virtue of which lime sets under water, is known as (A) Slacking (B) Setting (C) Hydraulicity (D) Calcining

Last Answer : Answer: Option C

Malleability of metals means?

Description : Malleability of metals means?

Last Answer : Flattened into thin sheets by hammering

Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability

Description : Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability

Last Answer : (1) Tendency to gain electrons Explanation: The transition metals have a tendency to lose electrons. Since the electrons in the highest energy level are actually on a lower principal enemy number than the ... ions, the 4s electrons are always lost first; so, they form only cations (positive ions).

Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electro negativity (3) Low ionization energy (4) Malleability

Description : Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electro negativity (3) Low ionization energy (4) Malleability

Last Answer : (1) Tendency to gain electrons Explanation: The transition metals have a tendency to lose electrons. Since the electrons in the highest energy level are actually on a lower principal energy number than the ... makes it relatively easy to lose some or all of their electrons to land in stable state.

Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability

Description : Which among the following is not a characteristic of transition metals? (1) Tendency to gain electrons (2) Low electronegativity (3) Low ionization energy (4) Malleability 

Last Answer : Tendency to gain electrons

The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Description : The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Last Answer : Answer: Option B

Ductility of metals means?

Description : Ductility of metals means?

Last Answer : Stretched into a wire under pressure

To obtain softness and ductility, metals art a) tempered b) hardened c) enamelled d) hard faced

Description : To obtain softness and ductility, metals art a) tempered b) hardened c) enamelled d) hard faced

Last Answer : b) hardened

The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Description : The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Last Answer : Answer: Option D

Name the non-metallic mineral which can split easily into thin sheets. -SST 10th

Description : Name the non-metallic mineral which can split easily into thin sheets. -SST 10th

Last Answer : Mica is the non-metallic mineral which can be split easily into thin sheets. Mica is used in: (i) Electric and electronic industries: Mica is used in these industries due to its excellent ... properties and resistance to high voltage. (ii) Plastic industry uses mica as an extender and filler.

What element that can be pounded into thin sheets?

Description : What element that can be pounded into thin sheets?

Last Answer : Need answer

Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Description : Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Last Answer : Answer: Option A

An example of a rock whose minerals have been crushed into thin sheets or bands is: w) shale x) schist y) conglomerate z) granite

Description : An example of a rock whose minerals have been crushed into thin sheets or bands is: w) shale x) schist y) conglomerate z) granite

Last Answer : ANSWER: X -- SCHIST 

Name the gelatin-like substance which is prepared fro various species of red algae growing in Asiatic waters. The prepared product appears in the form of cakes, coarse granules, long shreds or in thin sheets. It is used extensively alone or in combination with various nutritive substances, as a medium for culturing bacteria and various fungi

Description :  Name the gelatin-like substance which is prepared fro various species of red algae growing in Asiatic waters. The prepared product appears in the form of cakes, coarse granules, long ... or in combination with various nutritive substances, as a medium for culturing bacteria and various fungi  

Last Answer : ANSWER: Agar-agar or just Agar

Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Last Answer : (C) Resilience

The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of cement (C) The phenomenon by virtue of which cement does not allow transmission of sound, is known as soundness of cement (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration

Last Answer : Answer: Option C