Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Percentage elongation of a material is a measure of its
(A) Ductility
(B) Brittleness
(C) Toughness
(D) Malleability
by

1 Answer

Answer :

(A) Ductility
by

Related questions

The ability of a material to absorb energy in the elastic range is a measure of its (A) Toughness (B) Resilience (C) Malleability (D) Brittleness

Description : The ability of a material to absorb energy in the elastic range is a measure of its (A) Toughness (B) Resilience (C) Malleability (D) Brittleness

Last Answer : (B) Resilience

The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Description : The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Last Answer : B

Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share

The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Last Answer : a) Malleability

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

Brittleness is opposite to (a) Toughness (b) Plasticity (c) Malleability (d) None of these

Description : Brittleness is opposite to (a) Toughness (b) Plasticity (c) Malleability (d) None of these

Last Answer : b) Plasticity

Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : (1) Brittleness Explanation: An important physical property of non metals is that they are brittle and hence cannot be beaten into sheets or drawn into wires. In other words, non-metals are non-malleable and non-ductile. Where stress is applied on nonmetals, they shatter into pieces.

Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : Brittleness

The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Description : The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Last Answer : (C) Hardness

Amount of energy that a material can absorb before its fracture is a measure of its (A) Toughness (B) Resilience (C) Malleability

Description : Amount of energy that a material can absorb before its fracture is a measure of its (A) Toughness (B) Resilience (C) Malleability

Last Answer : (A) Toughness

A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Last Answer : (B) Plasticity

Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Description : Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Last Answer : (B) Toughness

The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

The property of a material by which it can be beaten or rolled into thin plates, is called (A) Malleability (B) Ductility (C) Plasticity (D) Elasticity

Description : The property of a material by which it can be beaten or rolled into thin plates, is called  (A) Malleability  (B) Ductility  (C) Plasticity  (D) Elasticity

Last Answer : (A) Malleability 

The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Description : The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Last Answer : (B) Ductility

The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Description : The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Last Answer : (b) Ductility

The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleabilityy

Last Answer : (c) Ductility

The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Last Answer : (d) Malleability

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

Write on ductility and malleability of material.

Description : Write on ductility and malleability of material. 

Last Answer : Ductility Ductility is the ability of a material to deform plastically without fracture under tensile load. Because of this property , materials can be drawn out into fine wire without fracture ... Gold and silver are highly malleable. Malleable metals usually bend and twist in various shapes.

With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Cast iron has very high (A) Compressive strength (B) Ductility (C) Shock resistance (D) Resistance to brittleness

Description : Cast iron has very high (A) Compressive strength (B) Ductility (C) Shock resistance (D) Resistance to brittleness

Last Answer : (A) Compressive strength

Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Description : Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Last Answer : (B) Increasing the ductility transition temperature

Fine grained steels have (A) High brittleness (B) Higher tendency to distort (C) High ductility (D) None of these

Description : Fine grained steels have (A) High brittleness (B) Higher tendency to distort (C) High ductility (D) None of these

Last Answer : (C) High ductility

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Description : Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Last Answer : (D) Its elastic limit very close to ultimate breaking strength

The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Last Answer : (A) Ductility

Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Description : Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Last Answer : (D) Elastic limit close to ultimate breaking strength

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Last Answer : (B) Fluidity & castability

Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the heat affected zone leading to poor toughness of the weld (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld (D) Segregation of carbon and other element occurs in the weld pool leading to poor properties of the weld

Description : Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the ... of carbon and other element occurs in the weld pool leading to poor properties of the weld

Last Answer : (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld

The property by which a body returns to its original shape after removal of the force, is called (A) Plasticity (B) Elasticity (C) Ductility (D) Malleability

Description : The property by which a body returns to its original shape after removal of the force, is called  (A) Plasticity  (B) Elasticity  (C) Ductility  (D) Malleability 

Last Answer : (B) Elasticity 

Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Description : Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Last Answer : b)conductivity

The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Description : The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Last Answer : ANSWER: B

The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

Description : The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

Last Answer : B. Malleability (Answer)

The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Last Answer : B) Malleability

__________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Description : __________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Last Answer : d. Plasticity

The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Description : The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Last Answer : a) malleability

Young's modulus of a material is the measure of its (A) Stiffness (B) Malleability (C) Creep resistance (D) Tensile strength

Description : Young's modulus of a material is the measure of its (A) Stiffness (B) Malleability (C) Creep resistance (D) Tensile strength

Last Answer : Option A

Which of the following mechanical properties of a material is most structure insensitive? (A) Modulus of elasticity (young's modulus) (B) Toughness (C) Percentage reduction of area (D) Tensile strength

Description : Which of the following mechanical properties of a material is most structure insensitive? (A) Modulus of elasticity (young's modulus) (B) Toughness (C) Percentage reduction of area (D) Tensile strength

Last Answer : (A) Modulus of elasticity (young's modulus)

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

If percentage elongation of a material is more than 200%, it is classed as ?

Description : If percentage elongation of a material is more than 200%, it is classed as ?

Last Answer : Rubber.

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Temper brittleness of a material can be fairly detected by the __________ test. (A) Fatigue (B) Notched bar impact (C) Tensile (D) Hardness

Description : Temper brittleness of a material can be fairly detected by the __________ test. (A) Fatigue (B) Notched bar impact (C) Tensile (D) Hardness

Last Answer : Option B

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : (A) Lead

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : Option A

With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Description : With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Last Answer : (A) Percentage elongation