The property by which a body returns to its original shape after removal of the force, is called (A) Plasticity (B) Elasticity (C) Ductility (D) Malleability

The property by which a body returns to its original shape after removal of the force, is called 

(A) Plasticity 

(B) Elasticity 

(C) Ductility 

(D) Malleability 

by

1 Answer

Answer :

(B) Elasticity 

by

Related questions

The property of a material by which it can be beaten or rolled into thin plates, is called (A) Malleability (B) Ductility (C) Plasticity (D) Elasticity

Description : The property of a material by which it can be beaten or rolled into thin plates, is called  (A) Malleability  (B) Ductility  (C) Plasticity  (D) Elasticity

Last Answer : (A) Malleability 

The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Description : The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Last Answer : (B) Ductility

The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleabilityy

Last Answer : (c) Ductility

The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Last Answer : (d) Malleability

The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Description : The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Last Answer : (b) Ductility

A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Last Answer : (B) Plasticity

__________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Description : __________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Last Answer : d. Plasticity

The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Description : The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Last Answer : b) Elasticity

Vulcanisation of rubber does not increase its (A) Elasticity(B) Plasticity(C) Ductility(D) None of these

Description : Vulcanisation of rubber does not increase its (A) Elasticity (B) Plasticity (C) Ductility (D) None of these

Last Answer : (B) Plasticity

If a soil undergoes a change in shape and volume by application of external loads over it, but recovers its shape and volume immediately after removal of the load, the property of the soil is said to be (A) Resilience of soils (B) Elasticity of soils (C) Compressibility of soils (D) None of these

Description : If a soil undergoes a change in shape and volume by application of external loads over it, but recovers its shape and volume immediately after removal of the load, the property of the soil is said to ... Resilience of soils (B) Elasticity of soils (C) Compressibility of soils (D) None of these

Last Answer : Answer: Option B

The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Description : The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Last Answer : Answer: Option B

The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Last Answer : B) Malleability

The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Last Answer : (A) Ductility

Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Description : Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Last Answer : b)conductivity

The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Description : The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Last Answer : ANSWER: B

The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

Description : The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

Last Answer : B. Malleability (Answer)

The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Description : The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Last Answer : a) malleability

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

A member which is subjected to reversible tensile or compressive stress may fail at a stress lower than the ultimate stress of the material. This property of metal, is called (A) Plasticity of the metal (B) Elasticity of the metal (C) Fatigue of the metal (D) Workability of the metal

Description : A member which is subjected to reversible tensile or compressive stress may fail at a stress lower  than the ultimate stress of the material. This property of metal, is called  (A) Plasticity of the ... ) Elasticity of the metal  (C) Fatigue of the metal  (D) Workability of the metal

Last Answer : (C) Fatigue of the metal

Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Last Answer : (C) Resilience

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

Brittleness is opposite to (a) Toughness (b) Plasticity (c) Malleability (d) None of these

Description : Brittleness is opposite to (a) Toughness (b) Plasticity (c) Malleability (d) None of these

Last Answer : b) Plasticity

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Description : Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Last Answer : (A) Ductility

Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Description : Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Last Answer : (D) Its elastic limit very close to ultimate breaking strength

Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : (1) Brittleness Explanation: An important physical property of non metals is that they are brittle and hence cannot be beaten into sheets or drawn into wires. In other words, non-metals are non-malleable and non-ductile. Where stress is applied on nonmetals, they shatter into pieces.

Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Description : Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Last Answer : (D) Elastic limit close to ultimate breaking strength

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Last Answer : (B) Fluidity & castability

The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Last Answer : a) Malleability

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

Write on ductility and malleability of material.

Description : Write on ductility and malleability of material. 

Last Answer : Ductility Ductility is the ability of a material to deform plastically without fracture under tensile load. Because of this property , materials can be drawn out into fine wire without fracture ... Gold and silver are highly malleable. Malleable metals usually bend and twist in various shapes.

Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : Brittleness

Define ductility; plasticity; hardness strength.

Description : Define ductility; plasticity; hardness strength.

Last Answer : Definition: 1) Ductility Ductility is the ability of a material to be deformed plastically without fracture under tensile strength. Ductility is the property of material by which materials can be ... or cutting. The ability of a material to resist wear or abrasion and resist penetration.

Define ductility and plasticity.

Description : Define ductility and plasticity.

Last Answer : Ductility: It is the property of material to undergo a considerable deformation under tension before rupture.  Plasticity: The plasticity of a material is the ability to change its shape without destruction ... to it when the forces are removed. OR Lack of elasticity is called as plasticity. 

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

A material is said to be perfectly elastic if (A) It regains its original shape on removal of the load (B) It regains its original shape partially on removal of the load (C) It does not regain its original shape at all (D) None of these

Description : A material is said to be perfectly elastic if  (A) It regains its original shape on removal of the load  (B) It regains its original shape partially on removal of the load  (C) It does not regain its original shape at all  (D) None of these

Last Answer : (A) It regains its original shape on removal of the load 

The ability of the material to deform without breaking is called (a) Elasticity (b) Plasticity (c) Creep (d) None of these

Description : The ability of the material to deform without breaking is called (a) Elasticity (b) Plasticity (c) Creep (d) None of these

Last Answer : (b) Plasticity

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Description : Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Last Answer : (D) Weathering characteristics

The tendency of a deformed solid to regain its actual proportions instantly upon unloading known as ______________ a) Perfectly elastic b) Delayed elasticity c) Inelastic effect d) Plasticity

Description : The tendency of a deformed solid to regain its actual proportions instantly upon unloading known as ______________ a) Perfectly elastic b) Delayed elasticity c) Inelastic effect d) Plasticity

Last Answer : a) Perfectly elastic

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Distinguish between elasticity and plasticity.

Description : Distinguish between elasticity and plasticity.

Last Answer : Distinguish between elasticity and plasticity.

Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Last Answer : a) Modulus of elasticity

The permanent mode of deformation of a material known as _____________ a) Elasticity b) Plasticity c) Slip deformation d) Twinning deformation

Description : The permanent mode of deformation of a material known as _____________ a) Elasticity b) Plasticity c) Slip deformation d) Twinning deformation

Last Answer : b) Plasticity

In the relation ( T/J = Gθ/L = τ/ R), the letter G denotes modulus of ______ a. elasticity b. plasticity c. rigidity d. resilience

Description : In the relation ( T/J = Gθ/L = τ/ R), the letter G denotes modulus of ______ a. elasticity b. plasticity c. rigidity d. resilience

Last Answer : c. rigidity

If a body floating in a liquid returns back to its original position, when given a small angular displacement, the body is said to be in (A) Neutral equilibrium (B) Stable equilibrium (C) Unstable equilibrium (D) None of these

Description : If a body floating in a liquid returns back to its original position, when given a small angular displacement, the body is said to be in (A) Neutral equilibrium (B) Stable equilibrium (C) Unstable equilibrium (D) None of these

Last Answer : Answer: Option B

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Description : Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Last Answer : d) All of the mentioned