Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity
Last Answer : (C) Tensile strength
Description : Presence of even very minute amount (say 0.1%) of __________ in copper, reduces its electrical conductivity very seriously. (A) Bismuth (B) Arsenic (C) Antimony (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none
Last Answer : b)conductivity
Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these
Last Answer : (A) Ductility
Description : The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility
Last Answer : ANSWER: B
Description : Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability
Last Answer : (1) Brittleness Explanation: An important physical property of non metals is that they are brittle and hence cannot be beaten into sheets or drawn into wires. In other words, non-metals are non-malleable and non-ductile. Where stress is applied on nonmetals, they shatter into pieces.
Description : The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity
Last Answer : a) malleability
Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.
Last Answer : (A) Ductility.
Description : Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability
Last Answer : Brittleness
Description : With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability
Last Answer : (B) Fluidity & castability
Description : Addition of nickel to copper improves its (A) Machinability (B) Ductility (C) Strength (D) Hardness
Last Answer : (D) Hardness
Description : With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium
Last Answer : (A) Nickel
Description : Presence of even 0.005% of __________ in copper makes it highly brittle, rendering it useless for wire-drawing. (A) Oxygen (B) Arsenic (C) Antimony (D) Bismuth
Last Answer : (D) Bismuth
Description : Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability
Description : Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength
Last Answer : (D) Its elastic limit very close to ultimate breaking strength
Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability
Last Answer : (B) Plasticity
Description : Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength
Last Answer : (D) Elastic limit close to ultimate breaking strength
Description : Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity
Last Answer : ANSWER: Y -- HIGH COMPRESSIVE STRENGTH
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : The property by which a body returns to its original shape after removal of the force, is called (A) Plasticity (B) Elasticity (C) Ductility (D) Malleability
Last Answer : (B) Elasticity
Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity
Last Answer : (A) More corrosion resistant
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)
Last Answer : B. Malleability (Answer)
Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness
Last Answer : a) Malleability
Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these
Last Answer : B) Malleability
Description : __________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity
Last Answer : d. Plasticity
Description : The property of a material by which it can be beaten or rolled into thin plates, is called (A) Malleability (B) Ductility (C) Plasticity (D) Elasticity
Last Answer : (A) Malleability
Description : The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability
Last Answer : (B) Ductility
Description : The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability
Last Answer : (b) Ductility
Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity
Last Answer : (a) Ductility
Description : The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleabilityy
Last Answer : (c) Ductility
Description : The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability
Last Answer : (d) Malleability
Description : Write on ductility and malleability of material.
Last Answer : Ductility Ductility is the ability of a material to deform plastically without fracture under tensile load. Because of this property , materials can be drawn out into fine wire without fracture ... Gold and silver are highly malleable. Malleable metals usually bend and twist in various shapes.
Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'
Last Answer : (A) Percentage elongation
Description : Manganese in steel affects its (A) Ductility (B) Tensile strength (C) Hardness (D) None of these
Last Answer : (B) Tensile strength
Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected
Last Answer : (C) Appreciable strain hardening is produced
Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility
Last Answer : (B) Cutting hardness
Description : Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness
Last Answer : (B) Increasing the ductility transition temperature
Description : Presence of dissolved impurities of __________ is responsible for the red brownish color of water. (A) Carbonates (B) Bi-carbonates (C) Iron & manganese (D) Arsenic
Last Answer : (C) Iron & manganese
Description : Presence of nickel & chromium in steel does not raise its (A) Elastic limit (B) Machining properties (C) Ductility (D) Resilience Answer: Option A
Last Answer : Option A
Description : Which of the following properties of a solid is not dependent on crystal imperfection? (A) Ductility (B) Semi-conductivity (C) Melting point (D) Yield stress
Last Answer : (C) Melting point
Description : Presence of nitrogen in steel (A) Makes it brittle (B) Increases its strength (C) Increases its hardness (D) Is desirable
Last Answer : (A) Makes it brittle
Description : Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility
Last Answer : (D) The ability of a material to fracture without appreciable deformation is called its ductility
Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded
Last Answer : E. Elastic limit was exceeded
Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.
Last Answer : (B) Resistivity
Description : Define ductility; plasticity; hardness strength.
Last Answer : Definition: 1) Ductility Ductility is the ability of a material to be deformed plastically without fracture under tensile strength. Ductility is the property of material by which materials can be ... or cutting. The ability of a material to resist wear or abrasion and resist penetration.
Description : Define the term: i)Tensile strength ii) Hardness iii) Ductility iv) Soldering
Last Answer : i)Tensile Strength : Tensile Strength is the ability of metal to carry a load without breaking. ii)Hardness :- Hardness is the ability of metal to resist wear or abrasion and resist penetration. ... a non ferrous alloy having melting point below 4000 c in between them is called as soldering.
Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.
Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air