Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Evaporation of 1kg of water from a solution in a single effect

evaporator requires about __________ kg of steam.

(A) 0.4 - 0.6

(B) 1-1.3

(C) 1.8-2

(D) 2 - 2.4


by

1 Answer

Answer :

(B) 1-1.3

by

Related questions

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Description : The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Last Answer : (C) Economy

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole(B) 22.4 Nm3(C) 32 kg(D) All (A), (B) and (C)

Description : Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole (B) 22.4 Nm3 (C) 32 kg (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Description : For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Last Answer : (B) Backward

What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Description : What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Last Answer : (C) < 1

A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Description : The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Last Answer : (A) Evaporative capacity

Which is the most suitable for the concert-ration of highly concentrated solution? (A) Open pan evaporation (B) Long tube vertical evaporator (C) Agitated film evaporator (D) None of these

Description : Which is the most suitable for the concert-ration of highly concentrated solution? (A) Open pan evaporation (B) Long tube vertical evaporator (C) Agitated film evaporator (D) None of these

Last Answer : (A) Open pan evaporation

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Description : Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively).(A) C/E (B) E/C (C) CE (D) 1/CE

Description : Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively). (A) C/E (B) E/C (C) CE (D) 1/CE

Last Answer : (A) C/E

Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Description : Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Last Answer : (A) Capacity

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Description : 1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Last Answer : b)200 g

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Steam economy in case of a triple effect evaporator will be (A) 1(B) < 1 (C) > 1 (D) Between 0 and 1

Description : Steam economy in case of a triple effect evaporator will be (A) 1 (B) < 1 (C) > 1 (D) Between 0 and 1

Last Answer : (C) > 1

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK

Description : Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK 

Last Answer : P 7bar T 29ᵒC x=0.9 m =1kg C p =2.35 KJ/KgK At pressure 7 bar saturation Temp T sat =165 ᵒC h f =697.2 KJ/Kg h fg= 2064.8 KJ/Kg i) Heat required when steam is wet ... ) When the stem is dry saturated hg=hf+hfg =2762 kj Heat actually required = 2762-121.8 = 2640.2 kj

. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000

Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Description : Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

Tea and Coffee are perfect substitute of each other, given the price of Tea and Coffee being `100 and `200 per Kg. a consumer is prepared to buy 3 Kg. of each. If the price of tea remain same and the price of Coffee rises to `400 per kg. the demand for Tea goes to 6 Kg. and that of Coffee falls to 1Kg. The elasticity of substitution between Tea and Coffee is (a) 1 ; (b) 4 ; (c) 5 ; (d) 3

Description : Tea and Coffee are perfect substitute of each other, given the price of Tea and Coffee being `100 and `200 per Kg. a consumer is prepared to buy 3 Kg. of each. If the price of tea remain same and the price of ... elasticity of substitution between Tea and Coffee is (a) 1 ; (b) 4 ; (c) 5 ; (d) 3

Last Answer : (c) 5 ;

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Description : Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Last Answer : (B) Horizontal tube

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Fresh orange juice contains 12% (by weight) solids and the rest water 90% of the fresh juice is sent to an evaporator to remove water and subsequently mixed with the remaining 10% of fresh juice. The resultant product contains 40% solids. The kg of water removed from 1 kg fresh juice is (A) 0.4 (B) 0.5 (C) 0.6 (D) 0.7

Description : Fresh orange juice contains 12% (by weight) solids and the rest water 90% of the fresh juice is sent to an evaporator to remove water and subsequently mixed with the remaining 10% of fresh juice. The resultant product contains 40% solids. ... from 1 kg fresh juice is (A) 0.4 (B) 0.5 (C) 0.6 (D) 0.7

Last Answer : (D) 0.7

or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Description : or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Last Answer : (C) 1

Multiple effect evaporation accounts for (A) Steam economy (B) Lower operating costs(C) Investment economy(D) None of these

Description : Multiple effect evaporation accounts for (A) Steam economy (B) Lower operating costs (C) Investment economy (D) None of these

Last Answer : (A) Steam economy

Flat Rate parcel price 1Kg, 2 Kg & 5 Kg are a) 125,200 & 400 b) 100,150 & 200 c) 50,100 &150 d) None of these

Description : Flat Rate parcel price 1Kg, 2 Kg & 5 Kg are a) 125,200 & 400 b) 100,150 & 200 c) 50,100 &150 d) None of these

Last Answer : a) 125,200 & 400

The advantage of dry compression is that (a) it permits higher speeds to be used (b) it permits complete evaporation in the evaporator (c) it results in high volumetirc and mechanical efficiency (d) all of the above

Description : The advantage of dry compression is that (a) it permits higher speeds to be used (b) it permits complete evaporation in the evaporator (c) it results in high volumetirc and mechanical efficiency (d) all of the above

Last Answer : Ans: d

In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Description : In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Last Answer : (B) < 1

Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Description : Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Last Answer : (C) Both (A) and (B)

AT Co makes a single product and is preparing its material usage budget for next year. Each unit of product requires 2kg of material, and 5,000 units of product are to be produced next year. Opening inventory of material is budgeted to be 800 kg and AT co budgets to increase material inventory at the end of next year by 20% The material usage budget for next year is (a) 8,000 Kg((b) 9,840 kg ((c) 10,000 Kg (d) 10,160 Kg no

Description : AT Co makes a single product and is preparing its material usage budget for next year. Each unit of  product requires 2kg of material, and 5,000 units of product are to be produced next year. Opening inventory of material is budgeted ... (a) 8,000 Kg((b) 9,840 kg ((c) 10,000 Kg (d) 10,160 Kg

Last Answer : ((c) 10,000 Kg

One kg of carbon for theoretically complete combustion requires __________ kg of air. (A) 11.5 (B) 0.5 (C) 23 (D) 12

Description : One kg of carbon for theoretically complete combustion requires __________ kg of air. (A) 11.5 (B) 0.5 (C) 23 (D) 12

Last Answer : (A) 11.5

A fire tube boiler is limited to a maximum steam pressure of about __________ kg/cm2. (A) 6 (B) 18 (C) 38 (D) 52

Description : A fire tube boiler is limited to a maximum steam pressure of about __________ kg/cm2. (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (B) 18

A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 - 1 shell and tube heat exchanger is available. The best arrangement is (A) Counter flow with process stream on shell side (B) Counter flow with process stream on tube side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Description : A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 ... side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Last Answer : (A) Counter flow with process stream on shell side

One kg of carbon requires 4/3 kg of oxygen and produces __________ kg of carbon monoxide gas.  A. 8/3  B. 11/3  C. 11/7  D. 7/3

Description : One kg of carbon requires 4/3 kg of oxygen and produces __________ kg of carbon monoxide gas.  A. 8/3  B. 11/3  C. 11/7  D. 7/3

Last Answer : Answer: D

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg