Normal force acting per unit cross sectional area is called A. weight B. pressure C. volume D. friction

Normal force acting per unit cross sectional area is called

A. weight

B. pressure

C. volume

D. friction
by

1 Answer

Answer :

pressure


by

Related questions

Stress is force applied on A. volume B. cross sectional area C. unit length D. across diagonal

Description : Stress is force applied on A. volume B. cross sectional area C. unit length D. across diagonal

Last Answer : cross sectional area

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

Normal force exerted per unit area by gas on walls of container is A. temperature B. energy C. pressure D. friction

Description : Normal force exerted per unit area by gas on walls of container is A. temperature B. energy C. pressure D. friction

Last Answer : pressure

The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (C) Ratio of mean coil diameter to wire diameter

The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (D) Force required to produce unit deflection

16. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow. A) Correct B) Incorrect

Description : 16. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow. A) Correct B) Incorrect

Last Answer : B

For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Last Answer : (B) Cross-sectional area

The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Last Answer : (C) 1/A

Only force acting on a bouncing ball is A. gravity B. weight of ball C. friction D. a and b both

Description : Only force acting on a bouncing ball is A. gravity B. weight of ball C. friction D. a and b both

Last Answer : a and b both

If a force of 50 N is applied across the cross-sectional area of 5 × 10- 7m2 then stress applied on it is A. 1 × 108 Pa B. 20 Pa C. 50 Pa D. 100 Pa

Description : If a force of 50 N is applied across the cross-sectional area of 5 × 10- 7m2 then stress applied on it is A. 1 × 108 Pa B. 20 Pa C. 50 Pa D. 100 Pa

Last Answer : . 1 × 108 P

Deformation drag, which is caused by widespread deformation of fluid around the immersed body(A) Occurs when NReis very small(B) Is primarily a friction drag(C) Is independent of body length(D) Depends mainly on cross-sectional shape

Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape

Last Answer : (A) Occurs when NRe is very small

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which cannot exceed under a situation d.The friction force acting when the body is just about to move e.Double of the normal friction

Description : The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which ... d.The friction force acting when the body is just about to move e.Double of the normal friction

Last Answer : d. The friction force acting when the body is just about to move

Coefficient of friction is the (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Coefficient of friction is the  (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction  (B) Ratio of limiting friction and normal reaction  (C) The ... body is just about to move  (D) The friction force acting when the body is in motion 

Last Answer : (B) Ratio of limiting friction and normal reaction

Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (D) The friction force acting when the body is in motion

Limiting force of friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and limiting friction (B) Ratio of limiting friction and normal reaction(C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Limiting force of friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (C) The friction force acting when the body is just about to move

Angle of friction is the (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The ratio of minimum friction force to the friction force acting when the body is just about to move (D) The ratio of minimum friction force to friction force acting when the body is in motion

Description : Angle of friction is the (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The ratio of minimum ... (D) The ratio of minimum friction force to friction force acting when the body is in motion

Last Answer : (A) Angle between normal reaction and the resultant of normal reaction and the limiting friction

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

An ideal tower packing should not (A) Have low weight per unit volume (B) Have large surface area per unit volume (C) Have large free cross-section (D) Hold up large amount of liquid in the packing

Description : An ideal tower packing should not (A) Have low weight per unit volume (B) Have large surface area per unit volume (C) Have large free cross-section (D) Hold up large amount of liquid in the packing

Last Answer : (D) Hold up large amount of liquid in the packing

Pair of forces that cause steering wheel of a car to rotate is called A. couple B. friction C. normal force D. weight

Description :  Pair of forces that cause steering wheel of a car to rotate is called A. couple B. friction C. normal force D. weight

Last Answer : couple

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N.

Description : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N.

Last Answer : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N. If a ... is produced in the wire, calculate the Poisson's ratio.

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch

Description : The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch

Last Answer : Answer: B

Tensile stress is equal to A. Force per unit area B. Force per unit volume C. Extension per unit length D. Extension per unit area

Description : Tensile stress is equal to A. Force per unit area B. Force per unit volume C. Extension per unit length D. Extension per unit area

Last Answer : Force per unit area

Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: (1) increases (2) decreases (3) stays the same (4) none of the above

Description : Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: (1) increases (2) decreases (3) stays the same (4) none of the above

Last Answer : (1) increases

Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Last Answer : resistance

E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Description : The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Last Answer : ANSWER: X -- THE RATIO OF STRESS OVER STRAIN

A tube of uniform cross sectional sectional area `1 cm^(2)` is closed at one end with semi permeable membrane. A solution having 6g glucose per 100 ml

Description : A tube of uniform cross sectional sectional area `1 cm^(2)` is closed at one end with semi permeable membrane. A solution having 6g glucose per 100 ml

Last Answer : A tube of uniform cross sectional sectional area `1 cm^(2)` is closed at one end with semi permeable membrane. A ... k^(-1)`, density of Hg=13.8 g/cc)

A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc

Description : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc

Last Answer : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries ... 3)ms^(-1)` D. `5xx10^(-6)ms^(-1)`

As per IS : 456, the reinforcement in a column should not be less than (A) 0.5% and not more than 5% of cross-sectional area (B) 0.6% and not more than 6% of cross-sectional area (C) 0.7% and not more than 7% of cross-sectional area (D) 0.8% and not more than 8% of cross-sectional area

Description : As per IS : 456, the reinforcement in a column should not be less than (A) 0.5% and not more than 5% of cross-sectional area (B) 0.6% and not more than 6% of cross-sectional area (C) 0.7% and not more than 7% of cross-sectional area (D) 0.8% and not more than 8% of cross-sectional area

Last Answer : Answer: Option D

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Last Answer : (B) Passing it through a pressure reducing valve

Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Description : Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Last Answer : (D) Large weight of liquid retained

Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Description : Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Last Answer : c. Friction force acting when the body is in motion

Carlos is pulling a 40 kilogram cart with a horizontal force of 100 newtons. The force of friction on the cart is 20 newtons. The acceleration of the cart is: w) 2 meters per second squared x) 2.5 meters per second squared y) 20 meters per second squared z) 200 meters per second squared

Description : Carlos is pulling a 40 kilogram cart with a horizontal force of 100 newtons. The force of friction on the cart is 20 newtons. The acceleration of the cart is: w) 2 meters per second squared x) 2.5 meters per second squared y) 20 meters per second squared z) 200 meters per second squared

Last Answer : ANSWER: W -- 2 METERS PER SECOND SQUARED

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Stress may be defin(B) Force per unit volume (C) Force per unit area (D) None of theseed as (A) Force per unit length

Description : Stress may be defined as  (A) Force per unit length (B) Force per unit volume  (C) Force per unit area  (D) None of these

Last Answer : (C) Force per unit area

Pick up wrong statement about friction force for dry surfaces. Friction force is (A) Proportional to normal load between the surfaces (B) Dependent on the materials of contact surface (C) Proportional to velocity of sliding (D) Independent of the area of contact surfaces

Description : Pick up wrong statement about friction force for dry surfaces. Friction force is  (A) Proportional to normal load between the surfaces  (B) Dependent on the materials of contact surface  (C) Proportional to velocity of sliding  (D) Independent of the area of contact surfaces 

Last Answer : (C) Proportional to velocity of sliding 

When a body is immersed in a liquid, the force acting on it is – (1) Upthrust (2) Weight (3) Mass (4) Both (1) and (2)

Description : When a body is immersed in a liquid, the force acting on it is – (1) Upthrust (2) Weight (3) Mass (4) Both (1) and (2)

Last Answer : (4) Both (1) and (2) Explanation: According to the Principle of Flotation, when a body is immersed in a fluid, two forces act on it: ( 1) The weight of the body acting vertically downward ... gravity of the fluid displaced, i.e., centre of buoyancy. The upthrust is also termed as buoyant force.

If weight of a falling tennis ball is 1.0 N and drag force acting on it is 0.2 N then resultant force is A. 0.8 N B. 0.5 N C. 1 N D. 2 N

Description : If weight of a falling tennis ball is 1.0 N and drag force acting on it is 0.2 N then resultant force is A. 0.8 N B. 0.5 N C. 1 N D. 2 N

Last Answer :  0.8 N

When a body is immersed in a liquid, the force acting on it is (1) Upthrust (2) Weight (3) Mass (4) Both (1) and (2)

Description : When a body is immersed in a liquid, the force acting on it is (1) Upthrust (2) Weight (3) Mass (4) Both (1) and (2)

Last Answer : Both (1) and (2)

Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2

Description : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2

Last Answer : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225mm2 when a load ... 's modulus of steel= 2 1011 N/m2]

A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.