In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

In the expansion stroke of a petrol engine, the piston is pushed with a great stroke.

Why?
by

1 Answer

Answer :

When the petrol-air mixture is ignited, carbon dioxide, carbon monoxide and water vapour

expands suddenly. This exerts a great force on the piston.
by

Related questions

Give reason: Steam exerts great pressure on the walls of the piston during expansion stroke.

Description : Give reason: Steam exerts great pressure on the walls of the piston during expansion stroke.

Last Answer : As steam occupies much larger volume than the same amount of water, it exerts great pressure on the walls of the piston.

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Last Answer : (b) number of power stroke per minute for all cylinders

What is the speed of the piston in the cylinder of a petrol engine ?

Description : What is the speed of the piston in the cylinder of a petrol engine ?

Last Answer : The speed of the piston in the cylinder of a petrol engine is also the speed of the alternator.

The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume

Description : The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume

Last Answer : ANSWER : C

For low load operation more economical engine is a. petrol engine b. diesel engine c. muticylinder engine d. two stroke engine

Description : For low load operation more economical engine is a. petrol engine b. diesel engine c. muticylinder engine d. two stroke engine

Last Answer : ANSWER b. diesel engine

The 'four stroke petrol engine' is based on – (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle's-cycle

Description : The 'four stroke petrol engine' is based on – (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle's-cycle

Last Answer : (2) Otto-cycle Explanation: A four-stroke engine (also known as four-cycle) is an internal combustion n engine in which the piston completes four separate strokes—intake, compression, power, and exhaust—during two separate revolutions of the engine's crankshaft, and one single thermodynamic cycle.

Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Description : Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Last Answer : In two-stroke engine lub oil is mixed with petrol and thus some lub oil is blown out through the exhaust valves by scavenging and charging air. There is no such wastage in four stroke petrol engine.

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Describe working principle of 4 – Stroke Petrol (Engine) with sketch

Description : Describe working principle of 4 – Stroke Petrol (Engine) with sketch

Last Answer : Working of four stroke petrol engine: 1. Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. The piston moves from TDC to BDC and crank shaft rotates ... gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 7200 .

Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Description : Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Last Answer : Figure: Valve timing diagram of 4 stroke SI engine  

(i) state any two applications of I. C. Engine (ii) Draw a neat sketch of Two stroke petrol engine.

Description : (i) state any two applications of I. C. Engine (ii) Draw a neat sketch of Two stroke petrol engine.

Last Answer : Applications of I.C engine 1) In Automotive - i) Two stroke engine - Mopeds, Scooters. ii) Four stroke engine - Light vehicles, Heavy vehicles. 2) Marine Application - Ships, Boat 3) Locomotive s - ... handling system  (ii) Draw a neat sketch of Two stroke petrol engine. OR

The ‘four stroke petrol engine’ is based on (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle’s-cycle

Description : The ‘four stroke petrol engine’ is based on (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle’s-cycle

Last Answer : Otto-cycle

Give reason: The wheel makes another half rotation after the expansion stroke of steam engine.

Description : Give reason: The wheel makes another half rotation after the expansion stroke of steam engine.

Last Answer : Due to inertia of the crankshaft, the wheel makes another half rotation and completes one cycle.

Give reason: After the expansion stroke of a steam engine, steam condenses into water.

Description : Give reason: After the expansion stroke of a steam engine, steam condenses into water.

Last Answer : As steam expands, it loses its kinetic energy and gets condensed into water.

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)

Description : In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)

Last Answer : The compression ratio in a Compression Ignition (CI) engine is generally in between a. 8 to 13 b. 14 to 23 c. 20 to 28 d. 25 to 32 (Ans:b)

Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Description : Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Last Answer : ANSWER c. 2 x stroke x rpm

Piston displacement is the volume displaced by the piston during one stroke and is usually expressed in 1. Cubic meter 2.cubic inches 3. Both of these 4. none of these

Description : Piston displacement is the volume displaced by the piston during one stroke and is usually expressed in 1. Cubic meter 2.cubic inches 3. Both of these 4. none of these

Last Answer :    <!-- [endif] -->ans-1

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by NOx emission is much higher by four stroke petrol engines as compared to the two stroke engines (C) Temperature in stratosphere rises with increasing altitude (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Description : Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by ... in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Last Answer : (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Linear motion of the piston in a heat engine is converted into circular motion by

Description : Linear motion of the piston in a heat engine is converted into circular motion by

Last Answer : Crankshaft.

Forward movement of a piston in a steam engine is called

Description : Forward movement of a piston in a steam engine is called

Last Answer : expansion stroke.

In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Description : In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Last Answer : ANSWER : C

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Consideration of the creep is the most important in case of the (A) Blades of gas turbine (B) Piston of an I. C. engine (C) Flywheel of steam engine (D) Cycle chain

Description : Consideration of the creep is the most important in case of the (A) Blades of gas turbine (B) Piston of an I. C. engine (C) Flywheel of steam engine (D) Cycle chain

Last Answer : (A) Blades of gas turbine

In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Description : In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Last Answer : ans 1

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

The EGT indication on a piston engine is used

Description : The EGT indication on a piston engine is used

Last Answer : C. To assist the pilot to adjust the fuel mixture

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

Piston speed for high speed engine is (a) 300-500 m/min (b) 100-300 m/min (c) 500-700 m/min (d) >700m/min

Description : Piston speed for high speed engine is (a) 300-500 m/min (b) 100-300 m/min (c) 500-700 m/min (d) >700m/min

Last Answer : (a) 300-500 m/min

State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Description : State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Last Answer : Engine components Material Functions Piston Cat aluminum alloy To transmit the force of explosion to the crankshaft. To form seal so that the high pressure gases in ... atmosphere through the exhaust pipe after combustion stroke is completed. To keep back pressure minimum.

Show the following components in an engine with neat sketch: piston, connecting rod, valves, spark plug

Description : Show the following components in an engine with neat sketch: piston, connecting rod, valves, spark plug

Last Answer : OR

The ignition stroke and expansion stroke are together called

Description : The ignition stroke and expansion stroke are together called

Last Answer : power stroke.

Expansion stroke:

Description : Expansion stroke:

Last Answer : In this stroke, the fuel burns quickly producing heat and gaseous products such as carbon dioxide, carbon monoxide and water vapour along with carbon particles. The gaseous products expand suddenly and pushes the piston outwards with a great force.

Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust

Description : Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust

Last Answer : Answer: b Explanation: Fuel is injected into the cylinder at the end of compression stroke and not at suction or expansion stroke.

The stroke of a heat engine in which outlet value opens is

Description : The stroke of a heat engine in which outlet value opens is

Last Answer : exhaust stroke

What is meant by stroke of an engine?

Description : What is meant by stroke of an engine?

Last Answer : The motion of piston from one end to another end is called stage/stroke of an engine.

Oil for two-stroke engine

Description : Does anyone have experience with four-stroke oil in two strokes? One told me that he had taken a muscovy trainer and stirred it to Trabos, and drove the engine 57,000 km. And he never bought 2MT. And how they scared us that she made ash and abrasive carbon :-)

Last Answer : I wouldn't try it until today's two-strokes ...: o But it's a fact that the Trabants and Wartas rode a lot (and it stinked accordingly), after all - even a friend refueled in his S11 and refueled it with an indulo. ..: o I don't have my own experience - I took care of S11.

In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?

Description : In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?

Last Answer : combustion and expansion

In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Description : In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Last Answer : ANSWER : B

Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Description : Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Last Answer : ANSWER : D

In a typical medium speed 4- stroke Diesel engine, the inlet valve A. opens 20°before top dead centre and closes at 35°afterthebottomdead centre. B. opens up at top dead centre and closes at bottomdead centre C. may open orcloseanywhere D. remains open for 200°

Description : In a typical medium speed 4- stroke Diesel engine, the inlet valve A. opens 20°before top dead centre and closes at 35°afterthebottomdead centre. B. opens up at top dead centre and closes at bottomdead centre C. may open orcloseanywhere D. remains open for 200°

Last Answer : ANSWER : A

In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Description : In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Last Answer : The ascending order of strokes in four stroke engine is a. Suction stroke - Expansion stroke - Compression stroke - Exhaust stroke b. Suction stroke - Compression stroke - Expansion stroke -Exhaust ... stroke d. Suction stroke - Compression stroke - Exhaust stroke - Expansion stroke (Ans:b)

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Description : A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Last Answer : Ans : c