In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?

In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?
by

1 Answer

Answer :

combustion and expansion
by

Related questions

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

The 'four stroke petrol engine' is based on – (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle's-cycle

Description : The 'four stroke petrol engine' is based on – (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle's-cycle

Last Answer : (2) Otto-cycle Explanation: A four-stroke engine (also known as four-cycle) is an internal combustion n engine in which the piston completes four separate strokes—intake, compression, power, and exhaust—during two separate revolutions of the engine's crankshaft, and one single thermodynamic cycle.

Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Description : Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Last Answer : In two-stroke engine lub oil is mixed with petrol and thus some lub oil is blown out through the exhaust valves by scavenging and charging air. There is no such wastage in four stroke petrol engine.

For four stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For four stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (D) 4πT m

Executes the entire cycle in just two strokes the power stroke and the compression stroke.  a. One-stroke engine  b. Two-stroke engine  c. Four-stroke engine  d. Eight-stroke engine

Description : Executes the entire cycle in just two strokes the power stroke and the compression stroke.  a. One-stroke engine  b. Two-stroke engine  c. Four-stroke engine  d. Eight-stroke engine

Last Answer : Two-stroke engine

The ‘four stroke petrol engine’ is based on (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle’s-cycle

Description : The ‘four stroke petrol engine’ is based on (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle’s-cycle

Last Answer : Otto-cycle

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Description : Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Last Answer : ANSWER : A

Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Description : Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Last Answer : ANSWER a. is lighter

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

A four cycle internal combustion automobile engine operates on what kind of cycle? w) Rankine x) Otto y) Brayton z) Joule

Description : A four cycle internal combustion automobile engine operates on what kind of cycle? w) Rankine x) Otto y) Brayton z) Joule

Last Answer : ANSWER: X -- OTTO

For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (B) 2πT m

Liquid fuels can be used to generate electricity in a variety of ways. Which of the following technologies converts liquid fuel directly to electricity without a combustion step? w) turbine x) battery y) fuel cell z) Stirling engine

Description : Liquid fuels can be used to generate electricity in a variety of ways. Which of the following technologies converts liquid fuel directly to electricity without a combustion step? w) turbine x) battery y) fuel cell z) Stirling engine

Last Answer : ANSWER: Y -- FUEL CELL  

The stroke of a heat engine in which outlet value opens is

Description : The stroke of a heat engine in which outlet value opens is

Last Answer : exhaust stroke

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Description : In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Last Answer : The ascending order of strokes in four stroke engine is a. Suction stroke - Expansion stroke - Compression stroke - Exhaust stroke b. Suction stroke - Compression stroke - Expansion stroke -Exhaust ... stroke d. Suction stroke - Compression stroke - Exhaust stroke - Expansion stroke (Ans:b)

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Description : Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Last Answer : ANSWER b. compression ignition engine

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

The firing order of four stroke four cylinder engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-4-3-2

Description : The firing order of four stroke four cylinder engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-4-3-2

Last Answer : c. 1-3-4-2

in four stroke engine there is one power stroke for every revolutions' of the cranks shaft a. 1 b. 2 c. 3 d.4

Description : in four stroke engine there is one power stroke for every revolutions' of the cranks shaft a. 1 b. 2 c. 3 d.4

Last Answer : ans b

In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Description : In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Last Answer : b. 1000 Hz

Connecting rod of four stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above

Description : Connecting rod of four stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above

Last Answer : C. Both compressive and tensile load

Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Description : Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Last Answer : Procedure: 1) Remove the valve cover according to your shop manual's instructions. Don't try to hammer a screwdriver or chisel between the valve cover and the head. You will ruin the gasket surface in a ... When the clearance feels good, hold the adjusting screw, and tighten up the lock nut. 

Describe working principle of four stroke diesel engine with the help of sketches.

Description : Describe working principle of four stroke diesel engine with the help of sketches.

Last Answer : Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. The piston moves from TDC to BDC and crank shaft rotates through 180˚. The downward movement of ... the burnt gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 720. 

Write the specifications of I.C. engine used in a two wheeler four stroke vehicle.

Description : Write the specifications of I.C. engine used in a two wheeler four stroke vehicle.

Last Answer : Engine specifications for two wheeler 1. Engine of Bajaj Discover 125 ST - Air-cooled, 4-stroke 124.6 cc engine - Maximum power of 12.8 Bhp at 9000 rpm - Maximum torque of 11 Nm at 7000 rpm OR 2. Honda Livo a) BS- ... rpm. d) Bore x Stroke - 50 x 55.6 mm e) C R - 9.9 : 1, Max Speed - 86KMPH

Describe the working of four stroke C. I. engine with neat sketch.

Description : Describe the working of four stroke C. I. engine with neat sketch. 

Last Answer : Working principle of CI engine: 1. Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. Only air is sucked into cylinder during this stroke. The ... burnt gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 720˚. 

Why are the pistons called that?

Description : Why are the pistons called that?

Last Answer : They are called this because Detroit is one of the biggestautomoblie producers in the country, and Pistons are found incars.

Will replacing pistons with flat top pistons in a 5.8 increase horse power?

Description : Will replacing pistons with flat top pistons in a 5.8 increase horse power?

Last Answer : Need answer

How many championships do the Detroit Pistons have?

Description : How many championships do the Detroit Pistons have?

Last Answer : 3

Why pistons are usually dished at top ?

Description : Why pistons are usually dished at top ?

Last Answer : Pistons are usually hollowed at top to (i) provide greater spa’e for combustion, (ii) increase surface for flue gases to act upon, and (iii) better distribution of stresses.

A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Description : A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Last Answer : (B) A cylinder and a plunger

The combustion reactions inside the engine of a rocket cause a buildup of heat and pressure. When this heat and pressure escapes into the atmosphere, what force is created?

Description : The combustion reactions inside the engine of a rocket cause a buildup of heat and pressure. When this heat and pressure escapes into the atmosphere, what force is created?

Last Answer : Thrust (apex)

In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Description : In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Last Answer : ANSWER c. heat resulting from compressing air that is supplied for combustion

Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction(B) Natural convection(C) Forced convection(D) None of these

Description : Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction (B) Natural convection (C) Forced convection (D) None of these

Last Answer : (B) Natural convection

Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Last Answer : Internal Combustion Engine

The most efficient heat engine that can operate between two temperature reservoirs T1 and T2 is: w) jet engine x) internal combustion engine y) Carnot engine (pron: car-no) z) steam engine

Description : The most efficient heat engine that can operate between two temperature reservoirs T1 and T2 is: w) jet engine x) internal combustion engine y) Carnot engine (pron: car-no) z) steam engine

Last Answer : ANSWER: Y -- CARNOT ENGINE

The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 %

Description : The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 % 

Last Answer : ANSWER: Y -- 35 % 

Which of the following insults or abnormalities most commonly causes ischemic stroke? a) Cocaine use Cocaine is a potent vasoconstrictor and may result in a life-threatening reaction, even with the individual’s first unprescribed use of the drug.

Description : Which of the following insults or abnormalities most commonly causes ischemic stroke? a) Cocaine use Cocaine is a potent vasoconstrictor and may result in a life-threatening reaction ... strokes. d) Intracerebral aneurysm rupture Intracerebral aneurysm rupture is associated with hemorrhagic strokes.

Last Answer : a) Cocaine use Cocaine is a potent vasoconstrictor and may result in a life-threatening reaction, even with the individual’s first unprescribed use of the drug.

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Last Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

Deficiency of combustion air during combustion of a gaseous fuel (A) Lengthens the flame (B) Causes heat loss of fuel by its partial combustion (C) Both (A) & (B) (D) Shortens the flame

Description : Deficiency of combustion air during combustion of a gaseous fuel (A) Lengthens the flame (B) Causes heat loss of fuel by its partial combustion (C) Both (A) & (B) (D) Shortens the flame

Last Answer : (C) Both (A) & (B)

A combustion reaction occurs when a substance, usually containing carbon reacts with to produce energy in the form of heat and light?

Description : A combustion reaction occurs when a substance, usually containing carbon reacts with to produce energy in the form of heat and light?

Last Answer : Oxygen.

Assertion (A): For a particular reaction, heat of combustion at constant pressure `(q_(P))` is always greater than that at constant volume `(q_(V))`.

Description : Assertion (A): For a particular reaction, heat of combustion at constant pressure `(q_(P))` is always greater than that at constant volume `(q_(V))`.

Last Answer : Assertion (A): For a particular reaction, heat of combustion at constant pressure `(q_(P))` is ... False. D. If both Assertion & Reason are false.

The Classical example of redox reaction is Combustion of fossil fuel. During combustion of fossil fuels, the carbon compound in the fossil fuel reacts with oxygen in the presence of a heat source to form carbon dioxide (CO 2 ) and water. Energy is also needed for the fossil fuel to react with oxygen, so the energy used in portion of combustion is an endothermic reaction.

Description : The Classical example of redox reaction is Combustion of fossil fuel. During combustion of fossil fuels, the carbon compound in the fossil fuel reacts with oxygen in the presence of a heat source to ... to react with oxygen, so the energy used in portion of combustion is an endothermic reaction.

Last Answer : Combustion of fossil fuel

Change of heat content when one mole of compound is burnt in oxygen at constant pressure is called the (A) Calorific value (B) Heat of reaction (C) Heat of combustion (D) Heat of formation

Description : Change of heat content when one mole of compound is burnt in oxygen at constant pressure is called the (A) Calorific value (B) Heat of reaction (C) Heat of combustion (D) Heat of formation

Last Answer : (C) Heat of combustion

Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction at constant volume is equal to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Description : Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction ... to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Last Answer : (D) Clausius-Clapeyron equation is not applicable to melting process

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

Oil for two-stroke engine

Description : Does anyone have experience with four-stroke oil in two strokes? One told me that he had taken a muscovy trainer and stirred it to Trabos, and drove the engine 57,000 km. And he never bought 2MT. And how they scared us that she made ash and abrasive carbon :-)

Last Answer : I wouldn't try it until today's two-strokes ...: o But it's a fact that the Trabants and Wartas rode a lot (and it stinked accordingly), after all - even a friend refueled in his S11 and refueled it with an indulo. ..: o I don't have my own experience - I took care of S11.