At terminal velocity the A. air resistance and weight are equal B. air resistance is less than weight C. weight is more than air resistance D. air resistance is more than weight

 At terminal velocity the

A. air resistance and weight are equal

B. air resistance is less than weight

C. weight is more than air resistance

D. air resistance is more than weight


by

1 Answer

Answer :

air resistance and weight are equal


by

Related questions

The terminal voltage of a cell supplying energy to a circuit is usually less than its emf because of the cell's w) size x) internal resistance y) mass z) energy

Description : The terminal voltage of a cell supplying energy to a circuit is usually less than its emf because of the cell's w) size x) internal resistance y) mass z) energy

Last Answer : ANSWER: X -- INTERNAL RESISTANCE

The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Description : The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Last Answer : (4) Viscous Force Explanation: Critical Velocity – The maximum velocity upto which fluid motion is streamline is called Critical Velocity. Streamline Flow – If velocity of all fluid particles is same all the time then it can be said in streamline flow.

The terminal velocity of a particle moving through a fluid varies as dp n . The value of n is equal to __________ in Stoke's law regime. (A) 1 (B) 0.5 (C) 2 (D) 1.5

Description : The terminal velocity of a particle moving through a fluid varies as dp n . The value of n is equal to __________ in Stoke's law regime. (A) 1 (B) 0.5 (C) 2 (D) 1.5

Last Answer : (C) 2

For a particle settling in water at its terminal settling velocity, which of the following is true? (A) Buoyancy = weight + drag (B) Weight = buoyancy + drag (C) Drag = buoyancy + weight (D) Drag = weight

Description : For a particle settling in water at its terminal settling velocity, which of the following is true? (A) Buoyancy = weight + drag (B) Weight = buoyancy + drag (C) Drag = buoyancy + weight (D) Drag = weight

Last Answer : (B) Weight = buoyancy + drag

Rain drops falling through atmospheric air attain limited terminal velocity, because of (A) Upward thrust due to air (B) Viscous force exerted by air (C) Surface tension effects of water (D) Force of gravity

Description : Rain drops falling through atmospheric air attain limited terminal velocity, because of (A) Upward thrust due to air (B) Viscous force exerted by air (C) Surface tension effects of water (D) Force of gravity

Last Answer : Option B

A bullet is fired with a muzzle velocity of 1000 meters per second from a rifle clamped to a window 4.9 meters above ground level. Neglecting air resistance, the horizontal distance from the rifle at which the bullet will strike the ground is w) 4.9 meters x) 500 meters y) 1000 meters z) 4900 meters

Description : A bullet is fired with a muzzle velocity of 1000 meters per second from a rifle clamped to a window 4.9 meters above ground level. Neglecting air resistance, the horizontal distance from the rifle at which the bullet will strike the ground is w) 4.9 meters x) 500 meters y) 1000 meters z) 4900 meters

Last Answer : ANSWER: Y -- 1000 METERS

After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Last Answer : ANSWER: Z -- REMAINS CONSTANT 

The velocity of heat radiation in vacuum is – (1) Equal to that of light (2) Less than that of light (3) Greater than that of light (4) Equal to that of sound

Description : The velocity of heat radiation in vacuum is – (1) Equal to that of light (2) Less than that of light (3) Greater than that of light (4) Equal to that of sound

Last Answer : (1) Equal to that of light Explanation: Electrons are generally responsible for heat conduction. The phonons (vibrations of the nuclei) also play a part, depending on the temperature of the ... Electromagnetic radiation, which in a vacuum should go on forever at the speed of light theoretically.

The velocity of heat radiation in vacuum is (1) Equal to that of light (2) Less than that of light (3) Greater than that of light (4) Equal to that of sound

Description : The velocity of heat radiation in vacuum is (1) Equal to that of light (2) Less than that of light (3) Greater than that of light (4) Equal to that of sound

Last Answer : Equal to that of light

The velocity of sound in moist air is more than in dry air because the moist air has (1) less density than city air (2) less pressure than dry air (3) more pressure than dry air (4) more density than dry air

Description : The velocity of sound in moist air is more than in dry air because the moist air has (1) less density than city air (2) less pressure than dry air (3) more pressure than dry air (4) more density than dry air

Last Answer : (1) less density than city air Explanation: The density of dry air is more than that of moist air (when moisture is removed from air, its density. increases). The speed of sound in a medium is inversely ... root of its density. Therefore, the speed of sound in moist air is more than that in dry air.

The velocity of sound in moist air is more than in dry air because the moist air has (1) less density than dry air. (2) less pressure than dry air. (3) more pressure than dry air. (4) more density than dry air.

Description : The velocity of sound in moist air is more than in dry air because the moist air has (1) less density than dry air. (2) less pressure than dry air. (3) more pressure than dry air. (4) more density than dry air. 

Last Answer : less density than dry air.

For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Description : For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Last Answer : (A) More

case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is (A) More (B) Less (C) Equal (D) Much more

Description : case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is (A) More (B) Less (C) Equal (D) Much more

Last Answer : Option C

An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from _____________. A. one line terminal to each coil lead in succession B. one field coil to each adjacent field coil in turn C. any suitable ground to any available line lead D. any field pole to each field coil lead

Description : An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from ... C. any suitable ground to any available line lead D. any field pole to each field coil lead

Last Answer : Answer: A

If lift is going up with acceleration, the apparent weight of a body is - (1) may be more or less than true weight (2) equal to the true weight (3) less than the true weight (4) more than the true weight

Description : If lift is going up with acceleration, the apparent weight of a body is - (1) may be more or less than true weight (2) equal to the true weight (3) less than the true weight (4) more than the true weight

Last Answer : (4) more than the true weight Explanation: If lift is going up with acceleration, the apparent weight of a body is more than the true weight.

If a lift is going up with acceleration, the apparent weight of a body is - (1) More or less the true weight (2) Equal to the true weight (3) Less than the true weight (4) More than the true weight

Description : If a lift is going up with acceleration, the apparent weight of a body is - (1) More or less the true weight (2) Equal to the true weight (3) Less than the true weight (4) More than the true weight

Last Answer : (4) More than the true weight Explanation: If a lift is going up with acceleration, the apparent weight of a body is more than the true weight.

A piece of wood is held under water. The up thrust on it will be: (1) equal to the weight of the Wood (2) less than weight of the wood (3) more than weight of the wood (4) Zero

Description : A piece of wood is held under water. The up thrust on it will be: (1) equal to the weight of the Wood (2) less than weight of the wood (3) more than weight of the wood (4) Zero

Last Answer : (2) less than weight of the wood Explanation: According to the Archimedes' principle, a floating object will experience an upthrust force from water, equal to the weight of water displaced (pushed aside ... until it reaches the point where the weight of the water pushed aside equals its own weight.

If lift is going up with acceleration, the apparent weight of a body is - (1) may be more or less than true weight (2) equal to the true weight (3) less than the true weight (4) more than the true weight

Description : If lift is going up with acceleration, the apparent weight of a body is - (1) may be more or less than true weight (2) equal to the true weight (3) less than the true weight (4) more than the true weight

Last Answer : (4) more than the true weight Explanation: If lift is going up with acceleration, the apparent weight of a body is more than the true weight.

A piece of wood is held under water. The upthrust on it will be: (1) equal to the weight of the wood (2) less than weight of the wood (3) more than weight of the wood (4) Zero

Description : A piece of wood is held under water. The upthrust on it will be: (1) equal to the weight of the wood (2) less than weight of the wood (3) more than weight of the wood (4) Zero

Last Answer : less than weight of the wood

A hydrogen balloon floats because of – (1) Air pressure decreases with decrease in height (2) Air pressure decreases with decrease in weight (3) Weight of the balloon is less than the weight of air displaced by it (4) The pressure inside the balloon is more than the pressure outside it

Description : A hydrogen balloon floats because of – (1) Air pressure decreases with decrease in height (2) Air pressure decreases with decrease in weight (3) Weight of the balloon is less than the weight of air displaced by it (4) The pressure inside the balloon is more than the pressure outside it

Last Answer : (3) Weight of the balloon is less than the weight of air displaced by it Explanation: A hydrogen atom is very light. Most of the air on earth is made up of nitrogen, oxygen, and carbon dioxide. ... grams per liter. Nitrogen, which makes up 80% of the air we breathe, weighs 1.2506 grams per liter.

A hydrogen balloon floats up because of (1) air pressure decreases with decrease in height (2) air pressure decreases with decrease in weight (3) weight of the balloon is less than the weight of air displaced by it. (4) the pressure inside the balloon is more than the pressure outside it

Description : A hydrogen balloon floats up because of (1) air pressure decreases with decrease in height (2) air pressure decreases with decrease in weight (3) weight of the balloon is less than the weight of air displaced by it. (4) the pressure inside the balloon is more than the pressure outside it

Last Answer : weight of the balloon is less than the weight of air displaced by it.

What is the terminal velocity of the moon crashing into Earth?

Description : What is the terminal velocity of the moon crashing into Earth?

Last Answer : answer:The Newtonian equation is F = G x (m1.m2)/r^2. It's hard to write equations on here, so see http://en.wikipedia.org/wiki/Newton's_law_of_universal_gravitation if that is unclear. ... mass of both objects, the gravitational force between the Earth and the Moon is dependent on both masses.

What is the terminal velocity of a human?

Description : What is the terminal velocity of a human?

Last Answer : The average teminal velocity is actually 120 mph. But it really depends on how you're falling. On mythbusters they tried different ways of falling and they found out that if you're falling with your body spread ... 250 mph. And I don't know how far of a fall it would take to reach terminal velocity.

How long will it take a skydiver to fall 1000 at terminal velocity?

Description : How long will it take a skydiver to fall 1000 at terminal velocity?

Last Answer : Terminal velocity, if you are flat toward the ground is about180 feet per second; so time is distance/speed = 1000 feet/180 =5.5 seconds. If you roll up like a ball terminal velocity may be ashigh as 280 feet per second. and time would be about 3.5seconds.

When falling object reaches terminal velocity, the net force acting on it is?

Description : When falling object reaches terminal velocity, the net force acting on it is?

Last Answer : When an object is not accelerating or decelerating, it has a net force of zero.

A 30% (by volume) suspension of spherical sand particles in a viscous oil has a hindered settling velocity of 4.44 μm/s. If the Richardson Zaki hindered settling index is 4.5, then the terminal velocity of a sand grain is (A) 0.90 μm/s (B) 1 μm/s (C) 22.1 μm/s (D) 0.02 μm/s

Description : A 30% (by volume) suspension of spherical sand particles in a viscous oil has a hindered settling velocity of 4.44 μm/s. If the Richardson Zaki hindered settling index is 4.5, then the terminal velocity of a sand grain is (A) 0.90 μm/s (B) 1 μm/s (C) 22.1 μm/s (D) 0.02 μm/s

Last Answer : (B) 1 μm/s

A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Last Answer : (C) 0.6

For a sphere falling in the constant drag co-efficient regime, its terminal velocity depends on its diameter (D) as (A) d (B) √d (C) d 2 (D) 1/d

Description : For a sphere falling in the constant drag co-efficient regime, its terminal velocity depends on its diameter (D) as (A) d (B) √d (C) d 2 (D) 1/d

Last Answer : (C) d

In Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass varies as the __________ of its diameter. (A) Inverse (B) Square root (C) Second power (D) First power

Description : In Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass varies as the __________ of its diameter. (A) Inverse (B) Square root (C) Second power (D) First power

Last Answer : (B) Square root

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

The terminal velocity of a particle moving through a fluid varies as dp n . What is the value of n' for Newton's law regime? (A) 0.5 (B) 1 (C) 1.5 (D) 3

Description : The terminal velocity of a particle moving through a fluid varies as dp n . What is the value of n' for Newton's law regime? (A) 0.5 (B) 1 (C) 1.5 (D) 3

Last Answer : (A) 0.5

The terminal velocity of a small sphere settling in a viscous fluid varies as the (A) First power of its diameter (B) Inverse of the fluid viscosity (C) Inverse square of the diameter (D) Square of the difference in specific weights of solid & fluid

Description : The terminal velocity of a small sphere settling in a viscous fluid varies as the (A) First power of its diameter (B) Inverse of the fluid viscosity (C) Inverse square of the diameter (D) Square of the difference in specific weights of solid & fluid

Last Answer : (B) Inverse of the fluid viscosity

The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Terminal velocity is (A) A constant velocity with no acceleration (B) A fluctuating velocity (C) Attained after moving one-half of total distance (D) None of these

Description : Terminal velocity is (A) A constant velocity with no acceleration (B) A fluctuating velocity (C) Attained after moving one-half of total distance (D) None of these

Last Answer : (A) A constant velocity with no acceleration

If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

The distribution of particle speeds in an ideal gas at a given temperature.  a. velocity of propagation  b. escape velocity  c. Maxwell speed Distribution  d. terminal velocity

Description : The distribution of particle speeds in an ideal gas at a given temperature.  a. velocity of propagation  b. escape velocity  c. Maxwell speed Distribution  d. terminal velocity

Last Answer : Maxwell speed Distribution

The terminal velocity of a sphere setting in a viscous fluid varies as : (a) The Reynolds number (b) The square of its diameter (c) Directly proportional to the viscosity of the fluid (d) Its diameter

Description : The terminal velocity of a sphere setting in a viscous fluid varies as : (a) The Reynolds number (b) The square of its diameter (c) Directly proportional to the viscosity of the fluid (d) Its diameter

Last Answer : (b) The square of its diameter

A cell of emf E and internal resistance r is connected in series with an external resistance nr. Than what will be the ratio of the terminal potential

Description : A cell of emf E and internal resistance r is connected in series with an external resistance nr. Than what will be the ratio of the terminal potential

Last Answer : A cell of emf E and internal resistance r is connected in series with an external resistance nr. Than what will be the ... /(n + 1)` D. `(n + 1)/n`

Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Last Answer : c. the battery is charged

Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance) (A) Cc × Cv (B) Cc × Cr (C) Cv × Cr (D) Cc /Cr

Description : Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance) (A) Cc × Cv (B) Cc × Cr (C) Cv × Cr (D) Cc /Cr

Last Answer : Answer: Option A

In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining the same, the temperature of the exit liquid will be (A) Less than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

Co-efficient of velocity is __________ the coefficient of discharge. (A) Less than (B) More than (C) Equal to (D) Not related to

Description : Co-efficient of velocity is __________ the coefficient of discharge. (A) Less than (B) More than (C) Equal to (D) Not related to

Last Answer : (B) More than

Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2ghD. independent of height and gravitational field strength)

Description : Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2gh) D. independent of height and gravitational field strength

Last Answer :  lesser than √(2gh

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Description : A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Last Answer : a. Less than 3.6 km/hour

Find the equivalent resistance of the network showed in figure between the terminal A and B? -Technology

Description : Find the equivalent resistance of the network showed in figure between the terminal A and B? -Technology

Last Answer : This answer was deleted by our moderators...

To carry out an insulation resistance test, one terminal of the megohmmeter should be connected to the winding, with the other terminal being connected to the ____________________. A. power supply B. variable resistor C. frame of the machine D. armature

Description : To carry out an insulation resistance test, one terminal of the megohmmeter should be connected to the winding, with the other terminal being connected to the ____________________. A. power supply B. variable resistor C. frame of the machine D. armature

Last Answer : Answer: C

The distinctive features of azithromycin include the following except: A. Efficacy against organisms which have developed resistance to erythromycin B. Marked tissue distribution and intracellular penetration C. Long terminal elimination half-life D. Low propensity to drug interactions due to inhibition of cytochrome P450 enzymes

Description : The distinctive features of azithromycin include the following except: A. Efficacy against organisms which have developed resistance to erythromycin B. Marked tissue distribution and intracellular penetration ... D. Low propensity to drug interactions due to inhibition of cytochrome P450 enzymes

Last Answer : A. Efficacy against organisms which have developed resistance to erythromycin

The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm

Description : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

Last Answer : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge