Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Low density polythene as compared to high density polythene is
(A) Harder
(B) Tougher
(C) Chemically inert
(D) More flexible
by

1 Answer

Answer :

(D) More flexible
by

Related questions

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Description : Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

__________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density

Description : __________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density

Last Answer : (A) High density

Catalyst used in the production of high density polythene by low pressure Ziegler process is(A) Aluminium triethyl activated with TiCl4(B) Platinum(C) Molybdenum(D) Nickel

Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel

Last Answer : (A) Aluminium triethyl activated with TiCl4

Zeigler process (A) Produces high density polythene(B) Uses no catalyst(C) Produces low density polythene(D) Employs very high pressure

Description : Zeigler process (A) Produces high density polythene (B) Uses no catalyst (C) Produces low density polythene (D) Employs very high pressure

Last Answer : (A) Produces high density polythene

Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Give one example of each for low density polythene and high density polthene.

Description : Give one example of each for low density polythene and high density polthene.

Last Answer : Ans: LDP. Squeze bottle and toys  HDP. Buckets, dustbin, bottles.

Density of low density polythene is about __________ gm/c.c. (A) 0.38 (B) 0.56 (C) 0.81 (D) 0.91

Description : Density of low density polythene is about __________ gm/c.c. (A) 0.38 (B) 0.56 (C) 0.81 (D) 0.91

Last Answer : (D) 0.91

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

A yellow metallic powder is burnt in a stream of fluorine to obtain a colourless gas X which is thermally stable and chemically inert. Its molecule ha

Description : A yellow metallic powder is burnt in a stream of fluorine to obtain a colourless gas X which is thermally stable and chemically inert. Its molecule ha

Last Answer : A yellow metallic powder is burnt in a stream of fluorine to obtain a colourless gas X which is thermally stable ... and NaC1` D. `SF_(4) and SF_(6)`

Chemically inert halide of sulphur is

Description : Chemically inert halide of sulphur is

Last Answer : Chemically inert halide of sulphur is A. `S_(2)Cl_(2)` B. `SF_(4)` C. `SCl_(2)` D. `SF_(6)`

Inert gases are - (1) Miscible with water (2) Not stable (3) Chemically uncreative (4) Chemically very active

Description : Inert gases are - (1) Miscible with water (2) Not stable (3) Chemically uncreative (4) Chemically very active

Last Answer : (3) Chemically uncreative Explanation: An inert gas is a gas which does not undergo chemical reactions since their valence shells are filled, meaning they don't normally form chemical bonds with other ... inert gases, also called noble gases, are argon, helium, neon, krypton, xenon and radon.

According to IS : 382-1963, a good aggregate should be (A) Chemically inert (B) Sufficiently strong (C) Hard and durable (D) All the above

Description : According to IS : 382-1963, a good aggregate should be (A) Chemically inert (B) Sufficiently strong (C) Hard and durable (D) All the above

Last Answer : Answer: Option D

Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Description : Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Last Answer : Answer: Option A

Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Description : Accordingly to IS: 383-1970, a good aggregate for concrete construction should be (a) Chemically inert (b) Sufficiently strong (c)Sufficiently hard and durable (d) All the above

Last Answer : (d) All the above

This plant species gives off secretions called Tabasheer which are 97% silica. It is claimed that this is a cure for coughs, asthma and is also an aphrodisiac. It is also true that Tabasheer is chemically inert, but may catalyse some chemical reactions. Where is Tabasheer normally obtained from?

Description : This plant species gives off secretions called Tabasheer which are 97% silica. It is claimed that this is a cure for coughs, asthma and is also an aphrodisiac. It is also true that Tabasheer is chemically inert, but may catalyse some chemical reactions. Where is Tabasheer normally obtained from?

Last Answer : Bamboo.

Inert gases are (1) Miscible with water (2) Not stable (3) Chemically unreactive (4) Chemically very active

Description : Inert gases are (1) Miscible with water (2) Not stable (3) Chemically unreactive (4) Chemically very active

Last Answer : Chemically unreactive

Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

Softening point of high density polythene is about __________ °C. (A) 85 (B) 135 (C) 165 (D) 205

Description : Softening point of high density polythene is about __________ °C. (A) 85 (B) 135 (C) 165 (D) 205

Last Answer : (B) 135

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

Density of high density polythene is about __________ gm/c.c. (A) 1.18 (B) 1.05 (C) 0.95 (D) 0.99

Description : Density of high density polythene is about __________ gm/c.c. (A) 1.18 (B) 1.05 (C) 0.95 (D) 0.99

Last Answer : (C) 0.95

Automobile steering wheels are normally made of (A) Cellulose acetate(B) Cellulose nitrate(C) PVC(D) High density polythene

Description : Automobile steering wheels are normally made of (A) Cellulose acetate (B) Cellulose nitrate (C) PVC (D) High density polythene

Last Answer : (A) Cellulose acetate

Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Description : Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Last Answer : (A) Polystyrene

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Description : Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which situation is tougher to deal with out of someone saying they love you, or you saying it to another?

Description : Which situation is tougher to deal with out of someone saying they love you, or you saying it to another?

Last Answer : Both the same. Same level of disappointment/discomfort.

Would your body become tougher by avoiding medicine for minor aches/pains?

Description : Would your body become tougher by avoiding medicine for minor aches/pains?

Last Answer : All that you would get out of toughing it out is a lot of pain. You just need to take medications including OTC medications thoughtfully and with awareness of how they work and the potential for side effects. That includes supplements too.

Diamond nanothreads. My first thought was jeans tougher than kids' knees. What are the potential uses?

Description : Diamond nanothreads. My first thought was jeans tougher than kids' knees. What are the potential uses?

Last Answer : Please define diamond nanothreads.

Does anybody else think that, at times, guitar hero is tougher than real guitar?

Description : Does anybody else think that, at times, guitar hero is tougher than real guitar?

Last Answer : I think that some Guitar Hero songs, on expert, are much harder than playing them on their real guitar. Like “Through the Fire and the Flames, very difficult song on Guitar Hero, but in real life I know dozens of people that have been playing for 2 years and can play it perfect.

WHY DOESN'T THE STATES ATTORNEY, GET EVEN TOUGHER ON DRUNK DRIVERS?

Description : WHY DOESN'T THE STATES ATTORNEY, GET EVEN TOUGHER ON DRUNK DRIVERS?

Last Answer : The laws regarding drinking and driving have been getting steadily stricter for the last several decades. At this point if someone gets a DWI they can pretty much count on having to spend ... or reasonable option. Mandatory breathalyzers in every new car is an idea supported by some organizations.

Assertion: (A) Ethers are relatively inert when compared to `C_(2)H_(5)OH` Reason (R): The hybridization of C and O in `CH_(3)-O-CH_(3) is SP^(3)`

Description : Assertion: (A) Ethers are relatively inert when compared to `C_(2)H_(5)OH` Reason (R): The hybridization of C and O in `CH_(3)-O-CH_(3) is SP^(3)`

Last Answer : Assertion: (A) Ethers are relatively inert when compared to `C_(2)H_(5)OH` Reason (R): The hybridization of ... R is false D. A is false but R is true

The caking of crystals can be prevented by (A) Maintaining high critical humidity (B) Maintaining low critical humidity (C) Coating the product with inert material (D) Both (A) and (C)

Description : The caking of crystals can be prevented by (A) Maintaining high critical humidity (B) Maintaining low critical humidity (C) Coating the product with inert material (D) Both (A) and (C)

Last Answer : (D) Both (A) and (C)

A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger(C) Is not subjected to washing(D) Has low quantity of mineral matter

Description : A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger (C) Is not subjected to washing (D) Has low quantity of mineral matter

Last Answer : (B) Is harder and stronger

Floppy disks which are made from flexible plastic material are also called? A) Hard disks B) High-density disks C) Diskettes D) Templates

Description : Floppy disks which are made from flexible plastic material are also called? A) Hard disks B) High-density disks C) Diskettes D) Templates

Last Answer : Answer : C

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : Diskettes

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : c. Diskettes

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : c. Diskettes

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Give reasons : a. Alkali metals have low ionization energies.  b. Inert gases have exceptionally high ionization energies.

Description : Give reasons : a. Alkali metals have low ionization energies.  b. Inert gases have exceptionally high ionization energies.

Last Answer : Give reasons : a. Alkali metals have low ionization energies. b. Inert gases have ... d. Noble gases possess relatively large atomic size.

Which of the following is not a practical method of low level radioactive waste disposal? (A) Dilution with inert material (B) Discharging to atmosphere through tall stacks after dilution (C) Disposing off in rivers & oceans (D) Filling in steel crates and shooting it off out of earth's gravity

Description : Which of the following is not a practical method of low level radioactive waste disposal? (A) Dilution with inert material (B) Discharging to atmosphere through tall stacks after dilution (C) Disposing off in rivers & oceans (D) Filling in steel crates and shooting it off out of earth's gravity

Last Answer : (D) Filling in steel crates and shooting it off out of earth's gravity

When in hot water I get harder. I am only useful once broken. Some people eat only the white part for its low fat, high protein nutritional content. What am I? -Riddles

Description : When in hot water I get harder. I am only useful once broken. Some people eat only the white part for its low fat, high protein nutritional content. What am I? -Riddles

Last Answer : I am an egg.

Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane(B) Polythene(C) Cellulose acetate(D) Teflon

Description : Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane (B) Polythene (C) Cellulose acetate (D) Teflon

Last Answer : (B) Polythene

Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Description : Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Last Answer : b) Low

Flexible shafts have _______ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Description : Flexible shafts have _______ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Last Answer : b) High

Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Description : Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Last Answer : b) Low

Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Description : Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Last Answer : b) Low

Flexible shafts have ___ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Description : Flexible shafts have ___ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Last Answer : b) High

A few drops of sap were collected by cutting across a plant stem by a suitable method. The sap was tested chemically. Which one of the following test results indicates that it is phloem sap? (a) Acidic (b) Alkaline (c) Low refractive index (d) Absence of sugar

Description : A few drops of sap were collected by cutting across a plant stem by a suitable method. The sap was tested chemically. Which one of the following test results indicates that it is phloem sap? (a) Acidic (b) Alkaline (c) Low refractive index (d) Absence of sugar

Last Answer : (b) Alkaline