In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

In chamber process of sulphuric acid manufacture in industry, the gas
phase oxidation of SO2
to SO3
is accomplished by a __________ reaction.
(A) Non-catalytic homogeneous
(B) Non-catalytic heterogeneous
(C) Catalytic homogenous
(D) Catalytic heterogeneous
by

1 Answer

Answer :

(C) Catalytic homogenous
by

Related questions

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

__________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Description : __________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Last Answer : (A) Homogeneous

During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Description : During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Last Answer : (D) Temperature is reduced and pressure is increased

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating sulphuric acid with sulphur trioxide (C) Vitriol oil is nothing but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling

The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Description : The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Last Answer : (B) 7-10 %

. Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Description : . Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Last Answer : (B) Cl2

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Contact process of sulphuric acid manufacture (A) Yields acid of higher concentration than chamber process (B) Yields acids of lower concentration than chamber process (C) Is obsolete (D) Eliminates absorber

Description : Contact process of sulphuric acid manufacture (A) Yields acid of higher concentration than chamber process (B) Yields acids of lower concentration than chamber process (C) Is obsolete (D) Eliminates absorber

Last Answer : (A) Yields acid of higher concentration than chamber process

For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) reaction between absorbed A and B in the gas phase (B) Surface reaction between absorbed A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B(D) Desorption of C

Description : For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) ... A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B (D) Desorption of C

Last Answer : (D) Desorption of C

Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier

At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P(D) 1/P

Description : At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P (D) 1/P

Last Answer : (B) √P

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, CO2 & SO2

Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Last Answer : (C) 98

More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

__________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Description : __________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Last Answer : (B) Sulphuric acid

Sulphuric acid saturated with SO3 is called (A) Concentrated H2SO4 (B) Sulphurous acid (C) Oleum(D) None of these

Description : Sulphuric acid saturated with SO3 is called (A) Concentrated H2SO4 (B) Sulphurous acid (C) Oleum (D) None of these

Last Answer : (C) Oleum

The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Description : The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Last Answer : (D) None of these

Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Description : Acid rain is due to increase in atmospheric  concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Last Answer : (d) SO2 and NO2.

Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Description : Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Last Answer : (d) SO2 and NO2.

Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Description : Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Last Answer : (c) SO2 and NO2

. Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Description : Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Last Answer : SO3 in pyridine at 100°C

__________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these

Description : __________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these

Last Answer : (B) Ostwald's

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR >> (1 + KA PA), the apparent activation energy EA is equal to (given E is the activation energy for the reaction and ΔHR and ΔHA are the activation energies of adsorption of R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Description : The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR ... R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Last Answer : (C) E + ΔHA - ΔHR )

In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio of SO2 to air. (A) (i) increases (ii) decreases (B) (i) decreases (ii) increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Description : In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio ... increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Last Answer : (B) (i) decreases (ii) increases

Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, SO2 & H2S

Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Description : Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Last Answer : (D) CO

If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 (as per Le Chatelier's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Description : 10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Last Answer : (C) SO3

Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Last Answer : (C) SO3

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

what do you mean by homogenous and heterogeneous equilibrium?

Description : what do you mean by homogenous and heterogeneous equilibrium?

Last Answer : Ans. Homogenous;-It is that equilibrium reaction in which all the reactants and the products are in the same phase. Heterogeneous equilibrium: - It is that equilibrium reaction in which all the reactants and the products are in two or more phases

Is xylem (or phloem) homogenous tissue or heterogeneous tissue?

Description : Is xylem (or phloem) homogenous tissue or heterogeneous tissue?

Last Answer : Xylem and phloem both are heterogeneous tissue and are made up of different type of cellular elements.

Array is A) Primary data type B) Pointer data type C) Heterogeneous data type D) Homogenous data type

Description : Array is A) Primary data type B) Pointer data type C) Heterogeneous data type D) Homogenous data type

Last Answer : D) Homogenous data type

Competition -oriented pricing is: A)used when costs and revenues are considered secondary to competitors' prices. B)not useful as a method of increasing or maintaining market share. C)of little use if the competing products are homogenous. D)most often used when competing products are heterogeneous.

Description : Competition-oriented pricing is: A)used when costs and revenues are considered secondary to competitors' prices. B)not useful as a method of increasing or maintaining market share. C)of little use if the competing products are homogenous. D)most often used when competing products are heterogeneous.

Last Answer : A)used when costs and revenues are considered secondary to competitors' prices.

Mannheim furnace is used in the manufacture of (A) Hydrochloric acid (B) H2SO4 by Chamber process (C) Calcium carbide (D) Corundum

Description : Mannheim furnace is used in the manufacture of (A) Hydrochloric acid (B) H2SO4 by Chamber process (C) Calcium carbide (D) Corundum

Last Answer : (A) Hydrochloric acid

Which of the following plants does not emit appreciable amount of SO2 in atmosphere? (A) Thermal power plant (B) Petroleum refinery (C) Nitric acid plant (D) Sulphuric acid plant

Description : Which of the following plants does not emit appreciable amount of SO2 in atmosphere? (A) Thermal power plant (B) Petroleum refinery (C) Nitric acid plant (D) Sulphuric acid plant

Last Answer : (C) Nitric acid plant

Vegetable oils are hydrogenated in a __________ reactor. (A) Slurry (B) Plug flow (C) Homogeneous catalytic (D) None of these

Description : Vegetable oils are hydrogenated in a __________ reactor. (A) Slurry (B) Plug flow (C) Homogeneous catalytic (D) None of these

Last Answer : (A) Slurry

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

. Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poiso(D) All (A), (B) and (C)ning tendency

Description : . Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poisoning tendency (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of (A) Nitric acid (B) Sulphuric acid (C) Ammonium sulphate (D) Hydrochloric acid

Description : Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of (A) Nitric acid (B) Sulphuric acid (C) Ammonium sulphate (D) Hydrochloric acid

Last Answer : (B) Sulphuric acid

How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Description : How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Last Answer : The amount of NO and SO3 would increased.

Mark the compound which possesses ionic, covalent and coordinate bonds. (1) NH4C1 (2) SO3 (3) SO2 (4) H2O

Description : Mark the compound which possesses ionic, covalent and coordinate bonds. (1) NH4C1 (2) SO3 (3) SO2 (4) H2O

Last Answer : (1) NH4C1 Explanation: Ammonium chloride (NH4Cl) is generally considered as an ionic compound but this compound has three different types of bond.