Mixer used for rubber compounding is
(A) mixer-extruder
(B) Banbury internal mixer
(C) Muller mixer
(D) Pug mill

1 Answer

Answer :

(B) Banbury internal mixer

Related questions

Description : Molten ammonium nitrate is mixed with ground limestone in fertilizer plant in a (A) Pug mill (B) Mixer-extruder (C) Banbury mixer (D) Muller mixer

Last Answer : (A) Pug mill

Description : __________ is the most suitable for compounding rubber and plastic solids. (A) Banbury mixer (B) Pan mixer (C) Pug mill (D) Charge can mixer

Last Answer : (A) Banbury mixer

Description : Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these

Last Answer : (B) Pug mill

Description : Mixing of light fine powder such as insecticides is done by (A) Banbury mixer (B) Pug mill (C) Impact wheels (D) Kneader

Last Answer : (C) Impact wheels

Description : A __________ mixer resembles a ball mill without balls. (A) Banbury (B) Pug mill (C) Tumbling (D) Pan

Last Answer : (C) Tumbling

Description : __________ mixer is used for devulcanisation of rubber scrap & making water dispersion & rubber solution. (A) Tumbler (B) Banbury (C) Muller (D) Ribbon blender

Last Answer : (B) Banbury

Description : Which of the following is the most important rubber compounding ingredient which is used to improve wearing qualities of both natural rubber & SBR by imparting toughness? (A) Phosphorous (B) Carbon black (C) Pine oil (D) Rosin

Last Answer : (B) Carbon black

Description : A pug mill is used for (A) Softening brick earth (B) Moulding brick earth (C) Tempering brick earth (D) Providing brick earth

Last Answer : Answer: Option C

Description : Pug mill is used for (A) Preparation of clay (B) Moulding of clay (C) Drying of bricks (D) Burning of bricks

Last Answer : Answer: Option A

Description : A pug mill is used for a) Softening brick earth b) Moulding brick earth c) Tempering brick earth* d) Compacting brick earth

Last Answer : c) Tempering brick earth*

Description : The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Last Answer : (A) Boundary mixer

Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Last Answer : (A) Lead

Description : Which of the following may be used to measure the rate of nuclear disintegration? (A) Geiger-Muller Counter (B) Cyclotron (C) Cold chamber (D) Mass spectrograph

Last Answer : (A) Geiger-Muller Counter

Description : How to figure out this compounding interest word problem?

Last Answer : I will start you out. Let me know if you need further help. The interest per month is i = .0175/12. The number of compounding periods = number of months = 12×25 = 300. p (1+i)^300 = 100000, where p is the starting principal that we want to find.

Description : How can investors receive compounding returns on investment?

Last Answer : Need answer

Description : A variable shunt, connected across the series field coils of a DC compound wound generator, to permit adjustment of the degree of compounding, is called a _____________. A. divider B. diverter C. converter D. rheostat

Last Answer : Answer: B

Description : Exhaust gas energy recovery in Electro turbo compounding (ETC) up to a. 10% Possible b. 20% Possible c. 30% Possible d. 40% Possible

Last Answer : Ans:- b. 20% Possible

Description : Describe velocity compounding with neat sketch.

Last Answer : ii) Velocity Compounding: ✓ In velocity compounding arrangement of blades and nozzles are made as below; N-M-F-M Where; N = Nozzle M = Moving blade F =Fixed blade ✓ Steam ... are shown in figure. ✓ This method has advantage that the initial cost is low so its efficiency is low.

Description : Explain the necessity of compounding in steam turbine and draw a neat sketch of pressure velocity compounding. 

Last Answer : Necessity of compounding in steam turbine: Compounding of steam turbines is necessary 1) To reduce speed of rotor blades to practical limits. 2) To reduce centrifugal force and hence to prevent ... stresses. Hence compounding is carried out.  Neat sketch of pressure velocity compounding.

Description : Explain the need of compounding. Suggest the method of compounding for reaction steam turbine with justification.

Last Answer : Need of compounding: ✔The compounding of steam turbine means the methods to reduce the speed of rotor shaft. ✔To increase the thermal efficiency in power plants, high pressure and high ... compounding: i. Velocity compounding ii. Pressure compounding iii. Pressure-Velocity compounding 

Description : Compounding of steam turbine

Last Answer : Compounding of steam turbine is required as in case of simple impulse turbine, the single stage may offer speed of the order of 30,000 rpm which cannot be directly used for any engineering ... means for reducing the speed of turbine where speed reduction is realized without employing a gear box. 

Description : Which of the following is not an ultrafine grinder (colloid mill)? (A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Last Answer : (C) Toothed roll crusher

Description : Has anyone seen the a 10-act play Muller Report play that took 18 actors to perform?

Last Answer : Would search for it on the net soon. Maybe YouTube has it.

Description : Who is called the 'Father of Economics'? (1) Max Muller (2) Karl Marx (3) Adam Smith (4) Alfred Marshall

Last Answer : (3) Adam Smith Explanation: Adam Smith who laid the foundations of classical free market economic theory is known as the Father of Modern Economics. His magnum opus, An Inquiry into the Nature and Causes of the Wealth of Nations (1776),' is considered the first modern work of economics.

Description : Diesel engine was discovered by------? A. Paul Muller B. Faraday C. Waldeyer D. Rudolf Diesel (Answer)

Last Answer : D. Rudolf Diesel (Answer)

Description : Geiger-Muller counter is used to detect-----? A. Protons (Answer) B. Neutrons C. Photons D. none

Last Answer : A. Protons (Answer)

Description : DDT first synthesized by a) Muller b) Faraday c) Zielder

Last Answer : c) Zielder

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

Description : Who is known as father of economics? A. Adam Smith B. Max Muller C. Joy Chaterjee D. Amritya Sen

Last Answer : A. Adam Smith

Description : “Linkage” was discovered by (1) Blakslee (2) Morgan (3) Muller (4) Bateson

Last Answer : Bateson

Description : How do I get my pug dog to stop hiking his leg inside?

Last Answer : answer:Is he neutered? Neutering will help with territory marking. Is he well-exercised? Pugs don't need really long walks, but regular outside play will help stop the in-house peeing. Crate training also works ... consider having the dog re-homed. Outside is NOT a safe option for a dog like a Pug.

Description : My pug has really bad indoor allergies. We have been to the vet and he cannot seem to help. Any suggestions?

Last Answer : My dog does too and she gets a shot of some kind of cortisone/steroid from the vet. This helps tremendously with her itching, as does Benadryl. I have a lab and a great dane, so they are huge and under ... but I just can't justify the cost. It's like $70.00 for a 30 lb bag or something ridiculous.

Description : What is ' Pug Mark' ?

Last Answer : Tiger census conducted by footprint counting.

Description :  In wild life Forensics, identification of animals done by (a). Grouping (b). Feathers (c). Twigs (d). Pug marks

Last Answer : Ans: (d). Pug marks 

Description : In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Last Answer : (B) Peclet

Description : Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Last Answer : (A) Mulling

Description : Which of the following is the most suitable for extraction in a system having very low density difference? (A) Mixer-settler extractor (B) Centrifugal extractor (C) Pulsed extractor (D) Packed extraction tower

Last Answer : (B) Centrifugal extractor

Description : Radioactive nuclear waste is treated in (A) Mixer-settler extractor (B) Rotating-disc contactor (C) Pulsed column extractor (D) Bollman extractor

Last Answer : (C) Pulsed column extractor

Description : The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Last Answer : (A) Pulse column

Description :  A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler ... increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Last Answer : (D) All 'a', 'b', & 'c'

Description : __________ extractor is used for the concentration of radioactive nuclear waste. (A) Pulsed column (B) Sieve plate (C) Mixer-settler (D) Bollman

Last Answer : (A) Pulsed column

Description : How can viscosity affect the design of a mixer?

Last Answer : For Newtonian fluids, which will have a constant viscosity at all impeller speeds, most design correlations will perform satisfactorily for viscosities up to 5,000 cP. Above 5,000 cP, estimating errors from 20% to 50% can result in the sizing of the agitator.

Description : What information is needed to specify a mixer?

Last Answer : 1. Specific Gravity 2. Fluid Viscosity 3. Phase to be dispersed 4. Solid-liquid systems The settling velocities of the 10, 50, and 90 percent weight fractions of the particle size distribution should be available. 5. For gas systems, the standard and actual flow rates will be needed.

Description : What is the difference between hand mixer and blender?

Last Answer : Hand mixers require the user to turn the handle to make the rotors spin. A blender is more powerful, and actually chops the ice or fibrous matter while it mixes. If you tried to do that with a hand mixer, or even an electric mixer, you would break it.

Description : What brand of stand mixer do you recommend?

Last Answer : I have the big kitchenaid mixer and it’s fine for bread and has more power than I have ever needed. I wouldn’t want to get my hand caught in it. I can check to see what the wattage is and the model if you like.