Description : A pug mill is used for a) Softening brick earth b) Moulding brick earth c) Tempering brick earth* d) Compacting brick earth
Last Answer : c) Tempering brick earth*
Description : Pug mill is used for (A) Preparation of clay (B) Moulding of clay (C) Drying of bricks (D) Burning of bricks
Last Answer : Answer: Option A
Description : The process of mixing clay, water and other ingredients to make brick is known as (A) Kneading (B) Moulding (C) Pugging (D) Drying
Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these
Last Answer : (B) Tempering
Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Last Answer : (A) Normalising
Description : Mixing of light fine powder such as insecticides is done by (A) Banbury mixer (B) Pug mill (C) Impact wheels (D) Kneader
Last Answer : (C) Impact wheels
Description : Mixer used for rubber compounding is (A) mixer-extruder (B) Banbury internal mixer (C) Muller mixer (D) Pug mill
Last Answer : (B) Banbury internal mixer
Description : A __________ mixer resembles a ball mill without balls. (A) Banbury (B) Pug mill (C) Tumbling (D) Pan
Last Answer : (C) Tumbling
Description : Molten ammonium nitrate is mixed with ground limestone in fertilizer plant in a (A) Pug mill (B) Mixer-extruder (C) Banbury mixer (D) Muller mixer
Last Answer : (A) Pug mill
Description : Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these
Last Answer : (B) Pug mill
Description : __________ is the most suitable for compounding rubber and plastic solids. (A) Banbury mixer (B) Pan mixer (C) Pug mill (D) Charge can mixer
Last Answer : (A) Banbury mixer
Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above
Last Answer : Answer: Option D
Description : The harmonious mixing of the clay ingredients, is known as (A) Weathering (B) Blending (C) Tempering (D) None of these
Last Answer : Answer: Option B
Description : Pick up the correct statement from the following: (A) Due to boiling, the bacterias present in water can be destroyed (B) Lime may be used for softening hard water (C) Excess lime when added to water, raises the pH value of water (D) All the above
Last Answer : (D) All the above
Description : Softening point of bitumen to be used for read construction at a place where maximum temperature is 40°C should be (A) Less than 40°C (B) Greater than 40°C (C) Equal to 40°C (D) None of the above
Description : The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina
Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above
Description : The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these
Last Answer : Answer: Option C
Description : Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above
Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %
Description : The weight of 1 m3 of brick earth, is about (A) 1200 kg (B) 1500 kg (C) 1800 kg (D) 2000 kg
Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80
Description : Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia
Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia
Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium
Description : The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable
Description : Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %
Description : Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying
Description : How do I get my pug dog to stop hiking his leg inside?
Last Answer : answer:Is he neutered? Neutering will help with territory marking. Is he well-exercised? Pugs don't need really long walks, but regular outside play will help stop the in-house peeing. Crate training also works ... consider having the dog re-homed. Outside is NOT a safe option for a dog like a Pug.
Description : My pug has really bad indoor allergies. We have been to the vet and he cannot seem to help. Any suggestions?
Last Answer : My dog does too and she gets a shot of some kind of cortisone/steroid from the vet. This helps tremendously with her itching, as does Benadryl. I have a lab and a great dane, so they are huge and under ... but I just can't justify the cost. It's like $70.00 for a 30 lb bag or something ridiculous.
Description : What is ' Pug Mark' ?
Last Answer : Tiger census conducted by footprint counting.
Description : Jai is having in his home four pet dogs named Saty, Jany, Rex, and Leo. The colors of the dogs are Brown, White, Grey and Black (not necessarily in the same order). The four dogs belong to different ... in color, then which dog belongs to pug breed? (a)Saty (b)Rex (c)Jany (d)Cannot be determined
Last Answer : (a)Saty
Description : Jai is having in his home four pet dogs named Saty, Jany, Rex, and Leo. The colors of the dogs are Brown, White, Grey and Black (not necessarily in the same order). The four dogs belong to ... Labrador breed. Which dog belongs to Labrador breed? (a)Saty (b) Leo (c)Jany (d)Cannot be determined
Last Answer : (d)Cannot be determined
Description : Jai is having in his home four pet dogs named Saty, Jany, Rex, and Leo. The colors of the dogs are Brown, White, Grey and Black (not necessarily in the same order). The four dogs belong to different breeds- ... the color of Alsatian dog? (a) Brown (b) Grey (c) Either(a)or(b) (d)None of these
Last Answer : (c) Either(a)or(b)
Description : Jai is having in his home four pet dogs named Saty, Jany, Rex, and Leo. The colors of the dogs are Brown, White, Grey and Black (not necessarily in the same order). The four dogs belong to different breeds- ... Pug, then what could be the color of Saty? (a) White (b) Black (c) Brown (d) Grey
Last Answer : Ans: option (b)
Description : Jai is having in his home four pet dogs named Saty, Jany, Rex, and Leo. The colors of the dogs are Brown, White, Grey and Black (not necessarily in the same order). The four dogs belong to different breeds- ... , then what could be its breed? (a) Labrador (b) Pug (c)Bull dog (d) None of these
Last Answer : (c)Bull dog
Description : In wild life Forensics, identification of animals done by (a). Grouping (b). Feathers (c). Twigs (d). Pug marks
Last Answer : Ans: (d). Pug marks
Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion
Last Answer : (C) Transfer
Description : Paper like thin plastic articles can be produced by (A) Blow moulding (B) Vacuum thermo forming (C) Injection moulding (D) None of these
Last Answer : (B) Vacuum thermo forming
Description : Plastic articles are normally produced by __________ moulding. (A) Green sand (B) Injection (C) Shell (D) Dry sand
Last Answer : (B) Injection
Description : Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression
Last Answer : (C) Extrusion
Description : Tyres are made by (A) Injection moulding (B) Extrusion (C) Rotational moulding (D) Compression moulding
Last Answer : (C) Rotational moulding
Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these
Last Answer : (C) Injection
Description : Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection
Last Answer : (A) Blow moulding
Description : The passage between the nozzle and the __________ is called 'sprue' in case of injection moulding. (A) Runner (B) Cylinder (C) Mold (D) None of these
Last Answer : (A) Runner
Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting
Last Answer : (C) Investment casting
Description : Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect
Last Answer : Option B
Description : Carbonisation of coal consists of A. drying and crushing the coal to a fine powder B. moulding the finely ground coal under pressure with or without a binding material C. heating the wood with a limited supply of air to temperature not less than 280°C D. none of the above
Last Answer : Answer: D