Description : Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge
Last Answer : (D) Sharpies super-centrifuge
Description : Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat
Last Answer : (D) Pre-coat
Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler
Last Answer : (A) Open sand
Description : Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge
Last Answer : (A) Cyclone separator
Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum
Last Answer : (C) Centrifugal
Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these
Last Answer : (A) Plate and frame filter
Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge
Last Answer : (C) Vacuum filter
Description : Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)
Last Answer : (B) Rotary disc filter
Description : __________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous
Last Answer : (C) Suspended batch basket
Description : __________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske
Last Answer : (C) Perforated horizontal basket continuous
Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these
Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose
Description : Sediment and microorganisms can be removed centrifugally in a ____. a. tube c. pan b. clarifier d. box
Last Answer : b. clarifier
Description : For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum
Last Answer : (A) Gravity sand
Description : Classify lubricating oil using viscosity (SAE) and load severity (API) rating.
Last Answer : 1.On the basis of Viscosity : i. Lubricating Oils Classify in terms of Viscosity at -18 0C or in cold climates. a) SAE 5W b) SAE 10W c) SAE 20 W ii. Lubricating Oils Classify ... sum oxidation stability & anti- scuff c. protection d. SC, SD & SE: Meets automotive manufactures specifications.
Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B
Description : Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these
Last Answer : (B) Is the measure of variation of viscosity with temperature
Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature
Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature
Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point
Last Answer : (C) Higher flash point and fire point
Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment
Last Answer : (A) Deoiling
Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil
Last Answer : (B) Causes olefins to combine with each other
Description : The proper arrangement of the petroleum fractions in order of their boiling points is (A) Lubricating oil > diesel > petrol > LPG (B) Lubricating oil > petrol > diesel > LPG (C) Petrol > lubricating oil > diesel > LPG (D) Petrol > diesel > LPG > lubricating oil
Last Answer : (A) Lubricating oil > diesel > petrol > LPG
Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point
Last Answer : (A) Viscosity index
Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay
Last Answer : (B) Solvent extraction
Description : Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin
Last Answer : (C) Smoke point
Description : Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol
Last Answer : (D) Petrol
Description : Ultracentrifuges running at speeds upto 100000 rpm is normally used for the (A) Separation of isotopes based on their density or molecular weights difference (B) Concentration of rubber latex (C) Separation of cream from milk (D) Dewaxing of lubricating oil
Last Answer : (A) Separation of isotopes based on their density or molecular weights difference (B) Conc
Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition
Last Answer : (B) Decreases
Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger
Last Answer : (A) Vane
Description : Higher viscosity index of a lubricating oil denotes (A) Less changes in fluidity of oil with temperature (B) Substantially high change in fluidity of oil with temperature (C) Its unsuitability under varying temperature conditions (D) None of these
Last Answer : (A) Less changes in fluidity of oil with temperature
Description : Lubricating greases are a mixture of (A) Mineral oil, soap and additives (B) Mineral oil and metallic soap (C) Mineral oil and fatty oil (D) Fatty oil and metallic soap
Last Answer : (A) Mineral oil, soap and additives
Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (A) Ultra
Description : What are the substances removed from the blood by tubular secretion? -Biology
Last Answer : answer:
Description : A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers
Last Answer : Answer: D
Description : To remove dirt from the flowing fluid, we use a (A) Coagulant (B) Gravity settler (C) Strains (D) Clarifier
Last Answer : (C) Strains
Description : __________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier
Last Answer : (C) Strainer
Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation
Last Answer : (D) Chemical coagulation
Description : Have you ever been burned by the sparks from a sparkler?
Last Answer : answer:This is a really great question. My experience with sparklers is similar to yours none of the sparks ever burned my bare hands. So why the fuss? A quick internet search provided some insightful ... when it comes to using sparklers. It is often the children who end up paying the price.
Description : Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling
Last Answer : Ans: C
Description : In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume
Last Answer : ANSWER c. swept volume
Description : Which of the following medium is compressed in a diesel engine cylinder? a. air b. air and fuel c. air and lubricating oil d. fuel
Last Answer : ANSWER a. air
Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil
Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.
Description : Coast Guard Regulations (46 CFR) require that the emergency diesel generator engine shut down when _____________. A. lubricating oil pressure is lost B. the engine overspeeds dangerously C. fixed CO2 is released into the emergency diesel generator space D. all of the above
Description : If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. ... replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover
Last Answer : Answer: B
Description : Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?
Last Answer : In two-stroke engine lub oil is mixed with petrol and thus some lub oil is blown out through the exhaust valves by scavenging and charging air. There is no such wastage in four stroke petrol engine.
Description : _______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air
Last Answer : (b) Lubricating oil
Description : ________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air
Last Answer : (a) Grease
Description : As compared with oil with VI=80, a lubricating oil with VI=90 (A) Has more viscosity (B) Has less viscosity (C) Has more rate of change of viscosity with respect to temperature (D) Has less rate of change of viscosity with respect to temperature
Last Answer : (D) Has less rate of change of viscosity with respect to temperature
Description : A knocking sound is produced in the engine when the fuel (a) Burns fast (b) contains lubricating oil (c) Burns slow (d) contains water
Last Answer : Burns fast
Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi
Last Answer : Gasoline
Description : Explain the selection of lubricating oil on the basis of viscosity and service rating.
Last Answer : Selection of Lubricating Oil: 1. On the basis of Viscosity : Lubricating Oils Classify in terms of Viscosity at -180C or in cold climates. a) SAE 5W b) SAE 10W c) SAE ... stability & anti- scuff Protection c) SC, SD & SC: Meets automotive manufactures specifications.