__________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

__________ centrifuge is the most suitable for separation of non-friable
crystals.
(A) Tubular bowl
(B) Disc-bowl
(C) Perforated horizontal basket continuous
(D) Suspended batch baske
by

1 Answer

Answer :

(C) Perforated horizontal basket continuous
by

Related questions

__________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Description : __________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Last Answer : (C) Suspended batch basket

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Description : Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Last Answer : (A) Disc bowl centrifuge

Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Description : Which of the following is a vacuum filter? (A) Filter press (B) Rotary disc filter (C) Batch basket centrifuge (D) Tank filter (Nutsche filter)

Last Answer : (B) Rotary disc filter

If radius of a batch basket centrifuge is halved & the r.p.m. is doubled, then the (A) Linear speed of the basket is doubled (B) Linear speed of the basket is halved (C) Centrifugal force is doubled (D) Capacity of centrifuge is increased

Description : If radius of a batch basket centrifuge is halved & the r.p.m. is doubled, then the (A) Linear speed of the basket is doubled (B) Linear speed of the basket is halved (C) Centrifugal force is doubled (D) Capacity of centrifuge is increased

Last Answer : (C) Centrifugal force is doubled

Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Last Answer : (A) Plate and frame filter

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Description : Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Last Answer : (D) Sharpies super-centrifuge

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Description : Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Last Answer : (A) Operate at higher speed

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

Moisture can be removed from lubricating oil using (A) Tubular centrifuge (B) Clarifier (C) Sparkler filter (D) Vacuum leaf filter

Description : Moisture can be removed from lubricating oil using (A) Tubular centrifuge (B) Clarifier (C) Sparkler filter (D) Vacuum leaf filter

Last Answer : (A) Tubular centrifuge

Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Description : Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Last Answer : (A) Cyclone separator

. In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch(B) Tubular(C) Batch(D) Back-mix

Description : . In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch (B) Tubular (C) Batch (D) Back-mix

Last Answer : (D) Back-mix

Which Phloem cellular element has tubular structure with perforated walls?

Description : Which Phloem cellular element has tubular structure with perforated walls?

Last Answer : Sieve tubes

Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The liquor left after the removal of crystals from a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Description : Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The ... a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Last Answer : (A) Swenson-Walker crystalliser is a batch crystalliser

Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Description : Steam is routed through the tube in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Short tube vertical (D) Long tube vertica

Last Answer : (B) Horizontal tube

Intermittent tube cleaning is possible to be done in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Calandria (D) None of these

Description : Intermittent tube cleaning is possible to be done in case of a __________ evaporator. (A) Basket type (B) Horizontal tube (C) Calandria (D) None of these

Last Answer : (A) Basket type

A __________ evaporator employs an annular downtake.(A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Description : A __________ evaporator employs an annular downtake. (A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Last Answer : (A) Basket type

Swenson-Walker crystalliser is a __________ unit. (A) Continuous (B) Batch (C) Semi-batch (D) Cooling (adiabatic)-cum-evaporation

Description : Swenson-Walker crystalliser is a __________ unit. (A) Continuous (B) Batch (C) Semi-batch (D) Cooling (adiabatic)-cum-evaporation

Last Answer : (A) Continuous

Penicillin is made employing __________ fermentation process. (A) Continuous (B) Aerobic batch (C) Anaerobic batch (D) None of these

Description : Penicillin is made employing __________ fermentation process. (A) Continuous (B) Aerobic batch (C) Anaerobic batch (D) None of these

Last Answer : (B) Aerobic batch

A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR(

Description : A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR

Last Answer : A) High pressure batch reactor

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Description : The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Last Answer : (A) Boundary mixer

Fussain (A) Is friable, charcoal like substance(B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking coal, controls its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Description : Fussain (A) Is friable, charcoal like substance (B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking ... its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

Separation of solid suspended in liquid into a supernatant clear liquid and a denser slurry employs a process termed as the (A) Coagulation (B) Flocculation (C) Sedimentation (D) Clarification

Description : Separation of solid suspended in liquid into a supernatant clear liquid and a denser slurry employs a process termed as the (A) Coagulation (B) Flocculation (C) Sedimentation (D) Clarification

Last Answer : (C) Sedimentation

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Turn down ratio of a burner (A) Should be as low as possible i.e., 1 : 2 (B) Should be 1:1 for a batch type furnace (C) Is the ratio of maximum to minimum permissible heat input rates (D) Is normally much more for a continuous furnace as compared to a batch furnace

Description : Turn down ratio of a burner (A) Should be as low as possible i.e., 1 : 2 (B) Should be 1:1 for a batch type furnace (C) Is the ratio of maximum to minimum permissible heat input rates (D) Is normally much more for a continuous furnace as compared to a batch furnace

Last Answer : (C) Is the ratio of maximum to minimum permissible heat input rates

In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & structural materials of furnace (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Description : In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & ... (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Description : In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Last Answer : (A) Solids are completely entrained

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (B) Sales demand of product is not steady

. A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Description : . A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Last Answer : (B) Ductile

Low temperature oxidation of coal is accelerated by the (A) Storage in large heaps (B) Storage in compressed piles (C) Absence of porous or friable particles (D) All (A), (B) and (C)

Description : Low temperature oxidation of coal is accelerated by the (A) Storage in large heaps (B) Storage in compressed piles (C) Absence of porous or friable particles (D) All (A), (B) and (C)

Last Answer : (A) Storage in large heaps

High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Description : A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Last Answer : (A) Compartmen

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

__________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Description : __________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Last Answer : (D) Packed

If a copper disc is rotated rapidly below a freely suspended magnetic...

Description : If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity

Last Answer : If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity less than that of disc and in the same direction.

Which type of processing syste Which type of processing system tends to produce th m tends to produce the most product variety? e most product variety? a)Assembly b)Job shop c)Batch d)Continuous

Description : Which type of processing syste Which type of processing system tends to produce th m tends to produce the most product variety? e most product variety? a)Assembly b)Job shop c)Batch d)Continuous

Last Answer : c)Batch

Which type of Which type of processing system processing system tends to tends to produce the produce the most product variety? product variety? a. Assembl y b. job shop c. Batch d. Continuous

Description : Which type of Which type of processing system processing system tends to tends to produce the produce the most product variety? product variety? a. Assembl y b. job shop c. Batch d. Continuous

Last Answer : b. job shop

Diaphragm valves are used for handling __________ fluids. (A) Corrosive (B) Viscous (C) Non-Newtonian (D) Solid suspended

Description : Diaphragm valves are used for handling __________ fluids. (A) Corrosive (B) Viscous (C) Non-Newtonian (D) Solid suspended

Last Answer : (A) Corrosive

Are Materials that containing asbestos are considered to be friable?

Description : Are Materials that containing asbestos are considered to be friable?

Last Answer : What is the answer ?

Which of the following statements regarding red soils of India is/are correct? 1. The colour of the soil is-red due to ferric oxide content. 2. Red soils are rich in lime, humous and potash. 3. They are porous and have friable structure. Select the correct answer using the code given below: [(OS2011] (a) 1 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Description : Which of the following statements regarding red soils of India is/are correct? 1. The colour of the soil is-red due to ferric oxide content. 2. Red soils are rich in lime, humous and potash. 3. They are porous and have friable ... OS2011] (a) 1 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Last Answer : Ans: (b)

which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Description : which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Last Answer : c) Friable ( crumbly

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop