Description : Which of the following methods is useful for separating pure forms of low melting metals?
Last Answer : Which of the following methods is useful for separating pure forms of low melting metals? A. ... . Distillation C. Poling D. Vapour phase refining
Description : One of the most common physical tests performed on fats is a determination of the ____ point. a. boiling c. melting b. cooling d. separating
Last Answer : c. melting
Description : Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point
Last Answer : (1) High melting and boiling point
Description : Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals
Last Answer : (A) Almost same for all metals
Description : Give reason .the melting point and boiling point of alkali metals are low
Last Answer : The melting and boiling points of the alkali metals are low indicating weak metallic bonding due to the presence of only a single valence electron in them.
Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity
Last Answer : ANSWER: Y -- HIGH MELTING POINT
Description : If the cost of separating a mineral from waste rock becomes too great the mineral may no longer be classified as an ore. This happens because?
Last Answer : Feel Free to Answer
Description : Which of the following are method of concentration of ore is metals?
Last Answer : Which of the following are method of concentration of ore is metals? A. girvity ... floation process C. electromagnetic separation D. smelting
Description : The common method for the extraction of metals from the oxide ore is :
Last Answer : The common method for the extraction of metals from the oxide ore is : A. Reduction with carbon B. ... . reduction with `H_(2)` D. electrolytic method
Description : Heating the ore below its melting point in the absence of air I to remove volatile impuri- ties is known as?
Last Answer : Calcination
Description : Heating of a ore below its melting point in the absence of air is known as – (1) Refining (2) Calcination (3) Roasting (4) Smelting
Last Answer : (2) Calcination Explanation: Calcination involves simple decomposition of ore on heating below its melting point usually in absence of air to produce new compounds having higher percentage of ... as removing the moisture, organic matter and volatile impurities. Calcination makes the ore porous.
Description : Heating of ore in the absence of air below its melting point is called
Last Answer : Calcinations
Description : Heating of a ore below its melting point in the absence of air is known as (1) Refining (2) Calcination (3) Roasting (4) Smelting
Description : The metals with very low melting points which melts by the temperature of palm are A) Sodium and potassium B) Lead and magnesium C) Aluminium and zinc D) Gallium and caesium
Last Answer : D) Gallium and caesium
Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance
Last Answer : (A) Higher melting points
Description : Which of the following is false? a) electricity is high-grade energy b) high grade forms of energy are highly ordered and compact c) low grade energy is better used for applications like melting of metals rather than heating water for bath
Last Answer : c) low grade energy is better used for applications like melting of metals rather than heating water for bath
Description : Metals are good conductors of electricity because (a) The contain free electrons (b) The atoms are lightly packed (c) They have high melting point (d) All of the above
Last Answer : Ans:(b)
Description : Which of the following metals has least, melting point? (1) Gold (2) Silver (3) Mercury (4) Copper
Last Answer : (3) Mercury Explanation: The melting point of the given metals (in Celsius) are:- Gold: 1063; Silver: 961; Copper: 1083; Mercury: 38.86. Mercury is the only elemental metal known to melt at a generally cold temperature.
Description : Metals are good conductors of electricity because - (1) they contain free electrons (2) the atoms are lightly packed (3) they have high melting point (4) All of the above
Last Answer : (1) they contain free electrons Explanation: Copper is used for electrical wiring because it is a good conductor of electricity. Metal particles are held together by strong metallic bonds, which is why they have high melting and boiling points.
Description : Metals are good conductors of electricity because – (1) they contain free electrons (2) the atoms are lightly packed (3) they have high melting point (4) All of the above
Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product
Last Answer : Option B
Description : Give reason for the higher melting point and boiling point of alkali earth metals than alkali metals.
Last Answer : The melting and boiling points of these metals are higher than the corresponding alkali metals due to smaller sizes.
Description : Which of the following metals has least melting point ? (1) Gold (2) Silver (3) Mercury (4) Copper
Last Answer : Mercury
Description : What is the most satisfactory method for separating sugars? -General Knowledge
Last Answer : The answer is 'Chromatography'
Last Answer : answer:
Description : How method of separating water and calcium carbonate?
Last Answer : Evaporate the water from the solution.
Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature
Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of nonideal binary system by distillation
Description : What is the most satisfactory method for separating sugars?
Last Answer : Chromatography
Description : __________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling
Last Answer : (D) A combination of separating & throttling
Description : Separating a substance from a mixture of liquid having I different boiling point is called?
Last Answer : Distillation
Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy
Last Answer : (A) Melts below the melting points of base metals
Description : While the recrystallisation temperature for pure metals is 0.3 Tm, the same for alloys is equal to __________ × Tm (where, Tm Melting temperature). (A) 0.25 (B) 0.45 (C) 0.70 (D) 0.95
Last Answer : (C) 0.70
Description : Brazing is the joining of metals (A) Without melting the base metal (B) With a non-ferrous filler (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : Option C
Description : Which of the following metals can be oriented directly during the roasting of its sulphide ore
Last Answer : Which of the following metals can be oriented directly during the roasting of its sulphide ore A. Hg B. Zn C. Fe D. Ca
Description : India is particularly poor in reserves of (a) coal (b) iron ore (c) non-ferrous metals (d) limestone
Last Answer : Ans: (c)
Description : The ore only two metals that are Non–Silver in colour, they are–
Last Answer : Copper and gold
Description : Electrometallurgical methods of metal extraction is normally used for those metals (A) Whose oxide/ore is not reduced by carbon (B) Which fall in the category of alkali & alkaline earth metals (C) Which stands higher in the electrochemical series of the metal (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Sphalerite is a primary ore of which of the following metals? w) zinc x) tin y) copper z) iron
Last Answer : ANSWER: W -- ZINC
Description : Galena is a primary ore of which of the following metals? w) zinc x) tungsten y) lead z) silver
Last Answer : ANSWER: Y -- LEAD
Description : Hematite is a primary ore of which of the followin metals? w) zinc x) tungsten y) iron z) none of the above
Last Answer : ANSWER: Y -- IRON
Description : Which of the following metals can be obtained from its ore only by electrolysis of a molten salt ? w) cobalt x) chromium y) copper z) sodium
Last Answer : ANSWER: Z -- SODIUM
Description : Which of the following metals is obtained from its most common ore using an electrolytic process? w) nickel x) tin y) aluminum z) manganese
Last Answer : ANSWER: Y -- ALUMINUM
Description : The most suitable method for extraction of copper from low grade sulphide ore is
Last Answer : The most suitable method for extraction of copper from low grade sulphide ore is A. Smelting ... process C. Leaching process D. Electrolytic process
Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity
Last Answer : B) High thermal conductivity
Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron
Description : The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point
Last Answer : Ans:(d)
Description : Alloy having low melting point?
Last Answer : Solder
Description : Reaction between X and Y forms compound Z. X loses electron and Y gains electron. Which of the following properties is not shown by Z? A) Has high melting point B) Has low melting point C) Conducts electricity in molten state D) Occurs as solid
Last Answer : B) Has low melting point
Description : Is phosphorus high or low melting point?
Last Answer : Melting point: 111.57 degrees Fahrenheit (44.15 degreesCelsius)
Description : What terms describe a substance that has a low melting point and poor electrical conductivity?
Last Answer : covalent and molecular