Which of the following gives the work required for size reduction of coal to -200 mesh in a ball mill most accurately? (A) Rittinger's law (B) Kick's law (C) Bond's law (D) None of these

Which of the following gives the work required for size reduction of
coal to -200 mesh in a ball mill most accurately?
(A) Rittinger's law
(B) Kick's law
(C) Bond's law
(D) None of these
by

1 Answer

Answer :

(A) Rittinger's law
by

Related questions

Which of the following crushing laws is most accurately applicable to the fine grinding of materials? (A) Bond's crushing law (B) Kick's law (C) Rittinger's law (D) None of these

Description : Which of the following crushing laws is most accurately applicable to the fine grinding of materials? (A) Bond's crushing law (B) Kick's law (C) Rittinger's law (D) None of these

Last Answer : (C) Rittinger's law

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher(B) Ball mill(C) Roll crusher(D) Gyratory crusher

Description : Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to(A) The new surface created(B) The size reduction ratio(C) The change in volume due to crushing(D) None of these

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

. Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Description : A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following gives the crushing energy required to create new surface ? (A) Taggarts rule (B) Fick's law (C) Rittinger's Law (D) None of these

Description : Which of the following gives the crushing energy required to create new surface ? (A) Taggarts rule (B) Fick's law (C) Rittinger's Law (D) None of these

Last Answer : (C) Rittinger's Law

Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a particle of a particular size is proportional to the square root of the surface to volume ratio of the product (C) Work required in crushing is proportional to the new surface created (D) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Last Answer : (B) Sticky (e.g. clay paste

For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a(A) Buhrstone mill(B) Ball mill(C) Crushing rolls(D) Hammer mill

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Description : Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Last Answer : (C) Jaw crusher

Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them. (A) Jaw crusher, Ball mill, Fluid energy mill(B) Ball mill, Jaw crusher, Fluid energy mill(C) Fluid energy mill, Jaw crusher, Ball mill(D) Fluid energy mill, Ball mill, Jaw crusher

Description : Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them. (A) Jaw crusher, Ball mill, Fluid energy mill (B) Ball mill, Jaw crusher, Fluid ... C) Fluid energy mill, Jaw crusher, Ball mill (D) Fluid energy mill, Ball mill, Jaw crusher

Last Answer : (A) Jaw crusher, Ball mill, Fluid energy mill

Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Description : Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Last Answer : (C) Impact

__________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Description : __________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Last Answer : (B) Minimum size

. Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ √Dp (B) P/m = K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Description : . Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ ... K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Last Answer : (C) P/m = K . (1/ D̅sb - 1/Ds̅a )

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Description : Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Last Answer : (B) Hammer crusher

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

two soccer players kick the same 2-kg ball at the same time in opposite directions One kicks with a force of 15N the other kicks with a force of 5N. what is the resulting acceleration of the ball, in m/s2?

Description : two soccer players kick the same 2-kg ball at the same time in opposite directions One kicks with a force of 15N the other kicks with a force of 5N. what is the resulting acceleration of the ball, in m/s2?

Last Answer : 5

A little girl kicks a soccer ball. It goes 10 feet and comes back to her. How is this possible?

Description : A little girl kicks a soccer ball. It goes 10 feet and comes back to her. How is this possible?

Last Answer : Ever heard of gravity? She kicked it up.

Equipment used for pulverizing the coal is known as (A) Ball mill (B) Hopper (C) Burner (D) Stoker.

Description : Equipment used for pulverizing the coal is known as (A) Ball mill (B) Hopper (C) Burner (D) Stoker.

Last Answer : Ans: A

Equipment used for pulverizing the coal is known as (A) Ball mill (B) Hopper (C) Burner (D) Stoker

Description : Equipment used for pulverizing the coal is known as (A) Ball mill (B) Hopper (C) Burner (D) Stoker

Last Answer : Ball mill

200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Description : 200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Last Answer : (B) 74

The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Last Answer : (B) Pneumatic conveyor

Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for(A) British standard screens(B) German standard screens (DIN 1171) etc(C) American standard screens (ASTM and Tyler standard screens)(D) All (A), (B) and (C)

Description : Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for (A) British ... (C) American standard screens (ASTM and Tyler standard screens) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

80% less than 200 mesh size particles are called (A) Smoke (B) Powder (C) Grit (D) Aggregates

Description : 80% less than 200 mesh size particles are called (A) Smoke (B) Powder (C) Grit (D) Aggregates

Last Answer : (B) Powder

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the(A) Blake jaw crusher(B) Cage mill(C) Stamp mill(D) Bradford's breaker

Description : Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the (A) Blake jaw crusher (B) Cage mill (C) Stamp mill (D) Bradford's breaker

Last Answer : (B) Cage mill

Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Description : Maximum size reduction in a fluid energy mill is achieved by (A) Compression (B) Interparticle attrition (C) Cutting (D) Impact

Last Answer : (B) Interparticle attrition

Which of the following is not a revolving/tumbling mill used for size reduction? (A) Compartment mill (B) Pebble mill (C) Cage mill (D) Rod mill

Description : Which of the following is not a revolving/tumbling mill used for size reduction? (A) Compartment mill (B) Pebble mill (C) Cage mill (D) Rod mill

Last Answer : (C) Cage mill

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Power required to drive a ball mill with a particular ball load is proportional to (where, D = diameter of ball mill.) (A) D (B) 1/D (C) D2.5 (D) 1/D2.5

Description : Power required to drive a ball mill with a particular ball load is proportional to (where, D = diameter of ball mill.) (A) D (B) 1/D (C) D2.5 (D) 1/D2.5

Last Answer : (C) D2.5 (D) 1/D2

In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Description : In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In ball mill operation, the feed size (Df in meters) and the ball diameter (Db in metres) are related as (where, K = grindability constant (varying from 0.9 to 1.4 in increasing order of hardness)) (A) Db 2 = K.Df (B) Db = K.Df (C) Db 3 = K.Df (D) Db 2 = K.Df

Description : In ball mill operation, the feed size (Df in meters) and the ball diameter (Db in metres) are related as (where, K = grindability constant (varying from 0.9 to 1.4 in increasing order of hardness)) (A) Db 2 = K.Df (B) Db = K.Df (C) Db 3 = K.Df (D) Db 2 = K.Df

Last Answer : (A) Db 2 = K.Df

The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Description : The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Last Answer : (A) Length to diameter ratio

Feed size of ≥ 25 cms can be accepted by (A) Ball mill (B) Rod mill (C) Fluid energy mill (D) Jaw crusherFeed size of ≥ 25 cms can be accepted by(A) Ball mill(B) Rod mill(C) Fluid energy mill(D) Jaw crusher

Description : Feed size of ≥ 25 cms can be accepted by (A) Ball mill (B) Rod mill (C) Fluid energy mill (D) Jaw crusher

Last Answer : (D) Jaw crusher

Cement clinker is reduced to fine size by a (A) Roll crusher (B) Ball mill (C) Tube mill (D) Hammer mill

Description : Cement clinker is reduced to fine size by a (A) Roll crusher (B) Ball mill (C) Tube mill (D) Hammer mill

Last Answer : (C) Tube mill

This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Axial flow

The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Description : The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Last Answer : (C) 18 kWh/ton

Pick out the material having minimum Rittinger's number. (A) Calcite (B) Pyrite (C) Quartz (D) Galena

Description : Pick out the material having minimum Rittinger's number. (A) Calcite (B) Pyrite (C) Quartz (D) Galena

Last Answer : (C) Quartz

Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Description : Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Last Answer : (A) Easier grindability

200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Description : 200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Last Answer : (C) inch

Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Description : Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Last Answer : (D) 200 mesh screen has 200 openings per linear cm

The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Description : The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Last Answer : (A) 0.0074 cm

Ball mills and tube mills with flint or porcelain balls are used for size reduction of (A) Asbestos (B) Rubber (C) Non-metallic ores (D) Limestone

Description : Ball mills and tube mills with flint or porcelain balls are used for size reduction of (A) Asbestos (B) Rubber (C) Non-metallic ores (D) Limestone

Last Answer : (C) Non-metallic ores

Size reduction of the __________ can be suitably done by ball mills, crushing rolls and rod mills. (A) Metalliferous ores (B) Non-metallic ores (C) Basic slags (D) Asbestos & mica

Description : Size reduction of the __________ can be suitably done by ball mills, crushing rolls and rod mills. (A) Metalliferous ores (B) Non-metallic ores (C) Basic slags (D) Asbestos & mica

Last Answer : (A) Metalliferous ores

A widely used size reduction equipment for __________ is Bradford breaker. (A) Talc (B) Coal (C) Iron core (D) Wheat

Description : A widely used size reduction equipment for __________ is Bradford breaker. (A) Talc (B) Coal (C) Iron core (D) Wheat

Last Answer : (B) Coal