Unsaturated oils compared to saturated oils have (A) Lower melting point & higher reactivity to oxygen (B) Higher melting point & higher reactivity to oxygen (C) Lower melting point & lower reactivity to oxygen (D) Higher melting point & lower reactivity to oxygen

Unsaturated oils compared to saturated oils have
(A) Lower melting point & higher reactivity to oxygen
(B) Higher melting point & higher reactivity to oxygen
(C) Lower melting point & lower reactivity to oxygen
(D) Higher melting point & lower reactivity to oxygen
by

1 Answer

Answer :

(A) Lower melting point & higher reactivity to oxygen
by

Related questions

Fats as compared to oils have (A) More unsaturated glycerides of fatty acids (B) Less unsaturated glycerides of fatty acids (C) Much higher reactivity to oxygen (D) Lower melting point

Description : Fats as compared to oils have (A) More unsaturated glycerides of fatty acids (B) Less unsaturated glycerides of fatty acids (C) Much higher reactivity to oxygen (D) Lower melting point

Last Answer : (B) Less unsaturated glycerides of fatty acids

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Both stearic acid and linoleic acid have 18 carbons. Linoleic acid is unsaturated, while stearic acid is saturated. The melting point of stearic acid : (a) is higher than linoleic acid (b) is lower than linoleic acid (c) is same as linoleic acid (d) can not predict, insufficient information

Description : Both stearic acid and linoleic acid have 18 carbons. Linoleic acid is unsaturated, while stearic acid is saturated. The melting point of stearic acid : (a) is higher than linoleic acid (b) is lower than linoleic acid (c) is same as linoleic acid (d) can not predict, insufficient information

Last Answer : is higher than linoleic acid

Vegetable oils contain large quantity of glycerides of unsaturated acids. When the vegetable oils contain high amount of saturated fatty acids, it is termed as __________ oil. (A) Drying (B) Semi-drying (C) Non-drying (D) None of these

Description : Vegetable oils contain large quantity of glycerides of unsaturated acids. When the vegetable oils contain high amount of saturated fatty acids, it is termed as __________ oil. (A) Drying (B) Semi-drying (C) Non-drying (D) None of these

Last Answer : (C) Non-drying

Drying oils contain a fairly large proportion of – (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Description : Drying oils contain a fairly large proportion of – (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Last Answer : (4) unsaturated fatty acids Explanation: They contain a high percentage of "polyunsaturates" (polyunsaturated fatty acids). Most drying oils owe their drying properties to the presence of a large percentage of linolenic acid (which derives its name from "linseed"), which is highly unsaturated.

Drying oils contain a fairly large proportion of (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Description : Drying oils contain a fairly large proportion of (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Last Answer : unsaturated fatty acids

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Description : Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Last Answer : (C) Lower density

In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer : (1) Low reactivity with metal Explanation: In arc welding, Argon is used as a shielding gas because it is chemically inert and forms no compounds. At the high temperatures that welding requires, the ... to brittle welds and instability in the welding arc. So,argon and other inert gases are sprayed.

In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer :  Low reactivity with metal

Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are called oils. (c) When hydrolyzed, they produce glycerol and carboxylate salts. (d) Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Description : Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are ... low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Last Answer : Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Last Answer : (B) Higher C/H ratio

Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Description : Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Last Answer : (B) Calorific value

H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Description : H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Last Answer : (B) Higher specific heat

Coke having higher porosity has (A) Lower bulk density (B) Lower strength (C) Higher reactivity (D) All (A), (B) and (C)

Description : Coke having higher porosity has (A) Lower bulk density (B) Lower strength (C) Higher reactivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The higher reactivity of an alkene or alkyne, as compared to an alkane, is due to (a) sigma bonds (b) pi bonds (c) hydrogen bonds (d) None of these

Description : The higher reactivity of an alkene or alkyne, as compared to an alkane, is due to (a) sigma bonds (b) pi bonds (c) hydrogen bonds (d) None of these

Last Answer : pi bonds

Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Description : Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Last Answer : (D) Degree of irregularity in atomic packing

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Last Answer : (D) None of these

Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Description : Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The dew point temperature is less than the wet bulb temperature for A. saturated air B. unsaturated air C. both saturated and unsaturated air D. none of the above

Description : The dew point temperature is less than the wet bulb temperature for A. saturated air B. unsaturated air C. both saturated and unsaturated air D. none of the above

Last Answer : ANSWER : B

The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Description : The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Last Answer : (A) Much lower

Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by NOx emission is much higher by four stroke petrol engines as compared to the two stroke engines (C) Temperature in stratosphere rises with increasing altitude (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Description : Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by ... in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Last Answer : (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Description : In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Last Answer : (A) Lower than

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Description : Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Last Answer : (D) None of these

Oils are unsaturated and

Description : Oils are unsaturated and

Last Answer : liquids at room temperature.

Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Description : Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Last Answer : (B) Unsaturated polyesters

Which of the following is stretched into fibres? (A) Saturated polyester (B) Unsaturated polyester (C) Isoprene (D) Bakelite

Description : Which of the following is stretched into fibres? (A) Saturated polyester (B) Unsaturated polyester (C) Isoprene (D) Bakelite

Last Answer : (A) Saturated polyester

__________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Description : __________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Last Answer : (B) Alkyd resins

Olefins are (A) Saturated hydrocarbons(B) Unsaturated cyclic compounds (hydrocarbons)(C) Present in substantially good quantity in crude petroleum(D) None of these

Description : Olefins are (A) Saturated hydrocarbons (B) Unsaturated cyclic compounds (hydrocarbons) (C) Present in substantially good quantity in crude petroleum (D) None of these

Last Answer : (D) None of these

Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Description : Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Last Answer : (A) Polyacrylonitrile

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C) Always contain some amount of nickel (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Description : Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C ... (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Last Answer : (A) Cause cholesterol build up and blood clotting

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Ceramic compounds as compared to metallic compounds (A) Crystallise faster (B) Resist greater tensile stress at room temperature (C) Have higher melting temperature (D) Are better conductor of electricity at higher temperature

Description : Ceramic compounds as compared to metallic compounds (A) Crystallise faster (B) Resist greater tensile stress at room temperature (C) Have higher melting temperature (D) Are better conductor of electricity at higher temperature

Last Answer : Option C

Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Description : Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Last Answer : Answer: B

Covalent network crystals have-------? A. higher melting point then molecular crystals (Answer) B. lower melting point then molecular crystals C. discrete molecules linked by Van der waals forces D. hydrogen bonding

Description : Covalent network crystals have-------? A. higher melting point then molecular crystals (Answer) B. lower melting point then molecular crystals C. discrete molecules linked by Van der waals forces D. hydrogen bonding

Last Answer : A. higher melting point then molecular crystals (Answer)

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Description : Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

13.a) What is solute and solvent in aerated drinks? b) Given a solution of substance 'A' how will you test whether it is saturated or unsaturated with respect to 'A' at the given temperature. -Chemistry

Description : 13.a) What is solute and solvent in aerated drinks? b) Given a solution of substance 'A' how will you test whether it is saturated or unsaturated with respect to 'A' at the given temperature. -Chemistry

Last Answer : (a) No solute and solvent is available in aerated drinks. (b) in the given solution add small amount of solute A, if A dissolved a daydream a transparent solution is formed then it is an unsaturated solution and if A doesn't dissolved and a precipitate is formed then it's a saturated solution

What is the chemical difference between a saturated and an unsaturated fat? -Biology

Description : What is the chemical difference between a saturated and an unsaturated fat? -Biology

Last Answer : answer:

What Lipids in their degree of saturated or unsaturated due to the number of?

Description : What Lipids in their degree of saturated or unsaturated due to the number of?

Last Answer : Need answer

What causes unsaturated fatty acid to have different shape than saturated fats?

Description : What causes unsaturated fatty acid to have different shape than saturated fats?

Last Answer : what are accurate comparisons of bases found in robins as opposed to bases found in sparrows