Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control fusion reaction (B) The fuel required (e.g. deuterium and tritium) is scarce (C) It is difficult to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Commercial power generation from fusion reactor is not yet possible,
because
(A) It is difficult to control fusion reaction
(B) The fuel required (e.g. deuterium and tritium) is scarce
(C) It is difficult to initiate fusion reaction
(D) Quantity of fuel required for initiating fusion reaction is prohibitively
high
by

1 Answer

Answer :

(A) It is difficult to control fusion reaction
by

Related questions

Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is scarce (C) It is difficult to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Description : Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is ... to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Last Answer : (A) It is difficult to control nuclear fusion reaction

Which of the following is a fuel for a fusion reactor (thermonuclear reactor)? (A) Deuterium and tritium (B) U-233 (C) Thorium (D) Heavy water

Description : Which of the following is a fuel for a fusion reactor (thermonuclear reactor)? (A) Deuterium and tritium (B) U-233 (C) Thorium (D) Heavy water

Last Answer : (A) Deuterium and tritium

Hydrogen bomb employs the nuclear fusion of (A) Hydrogen (B) Deuterium (C) Tritium (D) Helium

Description : Hydrogen bomb employs the nuclear fusion of (A) Hydrogen (B) Deuterium (C) Tritium (D) Helium

Last Answer : (B) Deuterium

The source of enormous energy of sun is a)Fusion of hydrogen to form helium b)Fission of uranium c)Fusion of deuterium and tritium d)Fusion to tritium

Description : The source of enormous energy of sun is a)Fusion of hydrogen to form helium b)Fission of uranium c)Fusion of deuterium and tritium d)Fusion to tritium

Last Answer : The source of enormous energy of sun is a)Fusion of hydrogen to form helium b)Fission of uranium ... and tritium D. fission of tritium to form helium

Of the following, which is the best fuel for a nuclear fusion reactor: w) hydrogen x) lithium y) deuterium z) helium

Description : Of the following, which is the best fuel for a nuclear fusion reactor: w) hydrogen x) lithium y) deuterium z) helium 

Last Answer : ANSWER: Y -- DEUTERIUM

Artificially produced radioactive isotopes are used for (A) Power generation (B) Treatment of certain diseases (C) Initiating nuclear fission and fusion (D) All (A), (B) and (C)

Description : Artificially produced radioactive isotopes are used for (A) Power generation (B) Treatment of certain diseases (C) Initiating nuclear fission and fusion (D) All (A), (B) and (C)

Last Answer : (B) Treatment of certain diseases

Which one is radioactive in nature? (A) Helium (B) Deuterium (C) Heavy hydrogen (D) Tritium

Description : Which one is radioactive in nature? (A) Helium (B) Deuterium (C) Heavy hydrogen (D) Tritium

Last Answer : (D) Tritium

Both tritium and deuterium have the same number of (A) Neutrons (B) Electrons (C) Protons (D) Nucleons

Description : Both tritium and deuterium have the same number of (A) Neutrons (B) Electrons (C) Protons (D) Nucleons

Last Answer : (A) Neutrons

Which one is the radioactive isotope of hydrogen? (A) Deuterium (B) Ortho-hydrogen (C) Tritium (D) None of these

Description : Which one is the radioactive isotope of hydrogen? (A) Deuterium (B) Ortho-hydrogen (C) Tritium (D) None of these

Last Answer : (C) Tritium

The decay product of tritium (a beta emitter) is (A) Lithium (B) Helium (C) Deuterium (D) Hydrogen

Description : The decay product of tritium (a beta emitter) is (A) Lithium (B) Helium (C) Deuterium (D) Hydrogen

Last Answer : (B) Helium

Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Description : Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Last Answer : (D) Fission of U-235 by neutrons

Heavy water is – (1) Deuterium (2) Rain water (3) Tritium oxide (4) Deuterium oxide

Description : Heavy water is – (1) Deuterium (2) Rain water (3) Tritium oxide (4) Deuterium oxide

Last Answer : (4) Deuterium oxide Explanation: Heavy water is deuterium oxide (2H2O). It is a form of water that contains a larger than normal amount of the hydrogen isotope deuterium (2H or D, also known as heavy ... 1 isotope (1H or H, also called protium) that makes up most of the hydrogen in normal water.

Heavy water is (1) Deuterium (2) Rain water (3) Tritium oxide (4) Deuterium oxide

Description : Heavy water is (1) Deuterium (2) Rain water (3) Tritium oxide (4) Deuterium oxide

Last Answer : Deuterium oxide

The lightest radioactive element is (1) deuterium (2) polonium (3) tritium (4) uranium

Description : The lightest radioactive element is (1) deuterium (2) polonium (3) tritium (4) uranium

Last Answer : tritium

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Critical mass" is the minimum mass of nuclear fissile material required for the (A) Sustainment of chain reaction (B) Power generation on commercial scale (C) Economic power generation (D) None of these

Description : Critical mass" is the minimum mass of nuclear fissile material required for the (A) Sustainment of chain reaction (B) Power generation on commercial scale (C) Economic power generation (D) None of these

Last Answer : (A) Sustainment of chain reaction

The principle behind a breeder reactor is: w) U-235 undergoes fission. x) U-238 is converted to Pu-239, which undergoes fission. y) Deuterium undergoes fission. z) Cobalt-60 undergoes fission.

Description : The principle behind a breeder reactor is: w) U-235 undergoes fission. x) U-238 is converted to Pu-239, which undergoes fission. y) Deuterium undergoes fission. z) Cobalt-60 undergoes fission.

Last Answer : ANSWER: X -- U-238 IS CONVERTED TO Pu-239, WHICH UNDERGOES FISSION. 

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

Description : A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

Last Answer : (A) A batch filter

Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high

Description : Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high

Last Answer : (B) No

Organic catalysts differ from the inorganic catalyst in the sense that the former is (A) Active at cryogenic temperatures only (B) Prohibitively costly (C) Proteinous in nature (D) Active at very high temperature only

Description : Organic catalysts differ from the inorganic catalyst in the sense that the former is (A) Active at cryogenic temperatures only (B) Prohibitively costly (C) Proteinous in nature (D) Active at very high temperature only

Last Answer : (C) Proteinous in nature

A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Description : A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Last Answer : (C) The fuel and the moderator is mixed to form a homogeneous material

A heterogeneous reactor is the one, in which the moderator and the (A) Coolant are different materials (B) Coolant are present in different phases (e.g., heavy water and graphite) (C) Fuel are present in different phases (e.g. uranium and heavy water) (D) None of these

Description : A heterogeneous reactor is the one, in which the moderator and the (A) Coolant are different materials (B) Coolant are present in different phases (e.g., heavy water and graphite) (C) Fuel are present in different phases (e.g. uranium and heavy water) (D) None of these

Last Answer : (C) Fuel are present in different phases (e.g. uranium and heavy water

A nuclear reactor harnesses nuclear energy by A. Nuclear fusion B. Spontaneous fission C. Uncontrolled chain reaction D. Controlled chain reaction

Description : A nuclear reactor harnesses nuclear energy by A. Nuclear fusion B. Spontaneous fission C. Uncontrolled chain reaction D. Controlled chain reaction

Last Answer : ANSWER: D

The purpose of a trim tab is: a. To assist the pilot in initiating movement of the controls b. To zero the load on the pilot controls in the flight attitude required c. To provide feel to the controls at high speed d. To increase the effectiveness of the controls

Description : The purpose of a trim tab is: a. To assist the pilot in initiating movement of the controls b. To zero the load on the pilot controls in the flight attitude required c. To provide feel to the controls at high speed d. To increase the effectiveness of the controls

Last Answer : b. To zero the load on the pilot controls in the flight attitude required

Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C

Description : Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C

Last Answer : (D) All (A), (B), and (C

An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Description : An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Last Answer : (A) Maximum at the inlet of the reactor

1. A deuterium nucleus consists of which particles? 2. With which field is Begum Akhtar associated? 3. In which year, some more commercial banks in addition to the first lot of 141 were nationalised in India? 4. Penganga, Wardha and Wainganga are the tributaries of which river? 5. What was the first discourse of Buddha at Deer Park in Sarnath called?

Description : 1. A deuterium nucleus consists of which particles? 2. With which field is Begum Akhtar associated? 3. In which year, some more commercial banks in addition to the first lot of 141 were ... 20. Which Sultan of Delhi had accepted the Suzerainty of the Timurid ruler Mirza Shah Rukh ?

Last Answer : Answer : 1. One proton and one neutron 2. Vocal Music 3. 1980 4. Godavari 5. Dharmachakrapravartan 6. Latic Acid 7. Germany and Austria 8. Frequency 9. Jupiter 10. Hathigunipha inscription 11. K. R. Kamath ... 16. British Monarch 17. 5 18. Fourth 5-Yr Plan 19. 30,000 km 20. Khizr Khan Sayyid

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

What refers to the strong repulsion between the positively charged nuclei which makes fusion reaction difficult to attain?  A. Atomic repulsion  B. Nuclear repulsion  C. Coulomb repulsion  D. Charge repulsion

Description : What refers to the strong repulsion between the positively charged nuclei which makes fusion reaction difficult to attain?  A. Atomic repulsion  B. Nuclear repulsion  C. Coulomb repulsion  D. Charge repulsion

Last Answer : Coulomb repulsion

Critical mass" is the minimum mass of nuclear fissile materialrequired for the(A) Sustainment of chain reaction(B) Power generation on commercial scale(C) Economic power generation(D) None of these

Description : Critical mass" is the minimum mass of nuclear fissile materialrequired for the (A) Sustainment of chain reaction (B) Power generation on commercial scale (C) Economic power generation (D) None of these

Last Answer : (A) Sustainment of chain reaction

In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Description : In a pressurised water reactor (PWR), the (A) Fuel is natural uranium and heavy water acts both as moderator & coolant (B) Coolant water boils in the core of the reactor (C) Coolant water is pressurised to prevent bulk boiling of water in the core (D) Use of moderator is not required

Last Answer : (C) Coolant water is pressurised to prevent bulk boiling of water in the core

Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Description : Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Last Answer : (C) High volatile matter content

The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Description : The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Last Answer : (A) Fuel cost per unit power generated is less

On large scale, tritium is produced by which of the following nuclear reaction?

Description : On large scale, tritium is produced by which of the following nuclear reaction?

Last Answer : On large scale, tritium is produced by which of the following nuclear reaction? A. `._(3)^(6)Li + ._(0)^(1 ... )^(1)H to ._(1)^(3)T` + other fragments

. __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Description : . __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Last Answer : (B) Bubble

When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Description : When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Last Answer : (D) Bubble

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Description : In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Last Answer : (C) Hydroelectric

Which of the following is not the part of Risk Control A. Execution of the risk response strategy B. Monitoring of triggering events C. Initiating contingency plans D. Not watching for new risks

Description : Which of the following is not the part of Risk Control  A. Execution of the risk response strategy  B. Monitoring of triggering events  C. Initiating contingency plans  D. Not watching for new risks

Last Answer : D. Not watching for new risks

Which of the following is true regarding the project scope statement?A. The project scope statement includes a change control system that describes how to make changes to the project scope. B. The project scope further elaborates the Initiating processes and serves as a basis for future project decisions. C. The project scope statement describes how the team will define and develop the work breakdown structure. D. The project scope statement assesses the reliability of the project scope and describes the process for verifying and accepting completed deliverables.

Description : Which of the following is true regarding the project scope statement? A. The project scope statement includes a change control system that describes how to  make changes to the ... reliability of the project scope and describes  the process for verifying and accepting completed deliverables.

Last Answer : B. The project scope further elaborates the Initiating processes and serves as a basis  for future project decisions.

Aluminium as a material of construction suffers from the disadvantage of (A) Very high cost (B) Rather low tensile strength (C) Very low strength to weight ratio (D) Scarce availability

Description : Aluminium as a material of construction suffers from the disadvantage of (A) Very high cost (B) Rather low tensile strength (C) Very low strength to weight ratio (D) Scarce availability

Last Answer : (B) Rather low tensile strength

The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) Emission of hazardous radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission

Heavy water' is termed as 'heavy' because it is (A) Denser than water (B) An oxide of deuterium (C) A heavy liquid (D) An oxide of heavier isotope of oxygen

Description : Heavy water' is termed as 'heavy' because it is (A) Denser than water (B) An oxide of deuterium (C) A heavy liquid (D) An oxide of heavier isotope of oxygen

Last Answer : (B) An oxide of deuterium

Identify the idea depicted in the cartoon: a. Equal distribution of income and wealth in the world. b. disparities of income and wealth between the rich and poor in the world c. The rich have access to scarce resources d. The poor have access to more resources because they are needy Correct

Description : Identify the idea depicted in the cartoon: a. Equal distribution of income and wealth in the world. b. disparities of income and wealth between the rich and poor in the world c. The rich have access to scarce resources d. The poor have access to more resources because they are needy Correct

Last Answer : b. disparities of income and wealth between the rich and poor in the world

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash