Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Thermosetting polymers as compared to thermoplastic polymers
(A) Are formed by addition polymerisation
(B) Have three dimensional structure
(C) Have linear structure
(D) None of these
by

1 Answer

Answer :

(B) Have three dimensional structure
by

Related questions

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Differentiate between Thermoplastic and Thermosetting polymers.

Description : Differentiate between Thermoplastic and Thermosetting polymers.

Last Answer : Differentiate between Thermosetting and Thermoplastic polymers: Thermosetting Thermoplastic Polymers which once mould /shaped do not soften when heated and thus cannot be reshaped  Polymers whose ... tri, tetra or poly functional. Monomer used in this polymer bi functional.

Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Last Answer : C) Teflon is formed by step growth polymerisation

Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Last Answer : (A) Addition polymerisation product

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids

Description : Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids

Last Answer : (C) Proteins

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Description : Thermoplastic resins usually (A) Remain hard as long as they are hot (B) Cannot be reclaimed from waste (C) Permanent setting resins (D) Less brittle than thermosetting resins

Last Answer : (D) Less brittle than thermosetting resins

Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Last Answer : (B) Thermoplastic

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

Compare between thermoplastic and thermosetting plastic.

Description : Compare between thermoplastic and thermosetting plastic.

Last Answer : Thermoplastics Thermosetting They can be repeated softened by heat and hardened on cooling Once hardened and set they do not softened with application of heat They are formed by ... to soft under heat  They can be used at comparatively higher temperature without damage. 

In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Last Answer : (C) The monomers contain two functional groups

Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Description : Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Last Answer : (C) Easily deform under pressure at high temperature

A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of (A) Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Last Answer : (D) Urea-formaldehyde resins

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Description : Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Last Answer : (D) Degree of irregularity in atomic packing

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Description : Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Last Answer : (C) Lower density

Which of the following types of polymers has the strongest inter particle forces? (A) Elastomers (B) Fibres (C) Thermoplastics (D) Thermosetting polymers

Description : Which of the following types of polymers has the strongest inter particle forces? (A) Elastomers (B) Fibres (C) Thermoplastics (D) Thermosetting polymers

Last Answer : (D) Thermosetting polymers

Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of theseThermosetting resins are those polymers, which(A) Do not increase in plasticity with rise in temperature(B) Allow slip to occur between molecules(C) Do not take on a permanent set(D) None of these

Description : Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of these

Last Answer : (A) Do not increase in plasticity with rise in temperature

Thermosetting polymers are (A) Injection moulded (B) Cast molded (C) Extruded (D) None of these

Description : Thermosetting polymers are (A) Injection moulded (B) Cast molded (C) Extruded (D) None of these

Last Answer : (B) Cast molded

Distinguish between thermoplastic and thermo setting polymers.

Description : Distinguish between thermoplastic and thermo setting polymers.

Last Answer : Thermo plastic polymer Thermo setting plastic  1. The inter moliculer forces are intermediate.  1. The inter molecular force are ... 3. Eg. Polythene and polystyrene  3. Eg. Bakelite

. Polymers which soften on heating and harden when cooled are (a) Cross-linked polymers (b) Copolymers (c) Thermosetting polymers (d) Thermoplastics

Description : Polymers which soften on heating and harden when cooled are (a) Cross-linked polymers (b) Copolymers (c) Thermosetting polymers (d) Thermoplastics

Last Answer : Thermoplastics

List any four properties of thermosetting polymers.

Description : List any four properties of thermosetting polymers.

Last Answer : Properties of thermosetting polymers:  1.Very poor elasticity 2.sronger attractive forces between chains 3. not soluble in organic compounds 4.can not be remoulded 5. these polymers produces by condensation polymerization

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

__________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Description : __________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Last Answer : (B) Melamine

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Polymerisation process in which two or more monomers of chemically different nature take part is called (A) Copolymerisation (B) Addition polymerisation (C) Chain polymerisation (D) None of these

Description : Polymerisation process in which two or more monomers of chemically different nature take part is called (A) Copolymerisation (B) Addition polymerisation (C) Chain polymerisation (D) None of these

Last Answer : (A) Copolymerisation

Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Description : Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Last Answer : (A) Organic peroxides

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Description : Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Last Answer : (A) Polybutadiene

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Description : Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Last Answer : (C) Flexibility

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these