Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion
Last Answer : (C) Transfer
Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these
Last Answer : (C) Injection
Description : Tyres are made by (A) Injection moulding (B) Extrusion (C) Rotational moulding (D) Compression moulding
Last Answer : (C) Rotational moulding
Description : Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection
Last Answer : (A) Blow moulding
Description : Plastic articles are normally produced by __________ moulding. (A) Green sand (B) Injection (C) Shell (D) Dry sand
Last Answer : (B) Injection
Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings
Last Answer : (C) Buckets
Description : Paper like thin plastic articles can be produced by (A) Blow moulding (B) Vacuum thermo forming (C) Injection moulding (D) None of these
Last Answer : (B) Vacuum thermo forming
Description : The passage between the nozzle and the __________ is called 'sprue' in case of injection moulding. (A) Runner (B) Cylinder (C) Mold (D) None of these
Last Answer : (A) Runner
Description : Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these
Last Answer : (C) Impact
Description : Steel pipes are normally manufactured by __________ process. (A) Extrusion (B) Cold working (C) Forging (D) Electroforming
Last Answer : (A) Extrusion
Description : The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'
Last Answer : (D) Both 'b' & 'c'
Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above
Last Answer : Answer: Option D
Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing
Last Answer : (A) Welding
Description : Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent
Last Answer : (D) Highly turbulent
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : Vent pipes are provided in a condenser to (A) Remove non-condensable gases (B) Purge the condenser (C) Facilitate easy cleaning of tubes (D) None of these
Last Answer : (A) Remove non-condensable gases
Description : Lead is poured into the joints between two __________ pipes. (A) Cast iron (B) Steel (C) Concrete (D) Plastic
Last Answer : (A) Cast iron
Description : Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion
Last Answer : Option B
Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester
Last Answer : (B) Low density polyethylene (LDPE)
Description : How do a pipes and tubes can be differ?
Last Answer : Pipes and Tubes may look similar, they are in fact quite different in nomenclature and sizing. Remember that pipes and tubes are rarely interchangeable.The difference between pipe and tube include: ... outer dimensions of the pipe. Tube measurements, on the other hand, are provided as a
Description : How is water circulated throughout the dry cooling tower system? a. Finned tubes b. Metal pipes c. Porous tubes d. Swifting tubes
Last Answer : a. Finned tubes
Description : How is water circulated throughout the dry cooling tower system? A] Finned tubes. B] Metal pipes C] Porous tubes. D] Swirling tubes
Last Answer : A] Finned tubes.
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : A coal with high ash content is undesirable, as (A) It is abrasive to the coal pulveriser (i.e. ball mill) and the combustion chamber (B) The ash in molten condition gets absorbed in the pores of the ... and stick to the boiler tubes thereby reducing the heat transfer (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid
Last Answer : C) Both 'a' & 'b'
Description : Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10
Last Answer : (A) 70 & 30
Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators
Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators
Description : In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail
Last Answer : Answer: d Explanation: None.
Description : Solid injection is also called ________________ a) air injection b) mechanical injection c) compression fuel injection d) none of the mentioned
Last Answer : Answer: b Explanation: Generally, solid injection is also called mechanical injection.
Description : Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio
Last Answer : Ans :c
Description : Rate of burning in the compression ignition engine can be controlled by a. rate of injection of fuel b. rate of air taken into carburetor c. both a. and b. d. none of the above
Last Answer : ANSWER a. rate of injection of fuel
Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel
Last Answer : (A) Platinum or gold alloys
Description : Circular cross section machine parts which are symmetrical about the axis of rotation are made by hot (A) Piercing (B) Spinning (C) Drawing (D) Extrusion
Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting
Last Answer : (C) Investment casting
Description : Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect
Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion
Description : Which of the following process is not formative process? a.Bending b.Plastic injection molding c.Selective Laser Sintering d.Forging
Last Answer : c.Selective Laser Sintering
Description : Where can I learn about plastic injection mold?
Last Answer : Plastic injection molding is a complex form of molding that uses plastic pellets and you heat them into a desired shape. Plastic injection molding can be very expensive when purchasing tools. ... more information on plastic injection molding go to http://www.engineersedge.com/injection_molding.htm.
Description : Evaporator tubes are generally (A) Horizontal (B) Vertical (C) Inclined (D) Random
Last Answer : (B) Vertical
Description : . Enamels and paints are generally __________ fluid. (A) Rheopectic (B) Pseudo-plastic (C) Thixotropic (D) Dilatant
Last Answer : (B) Pseudo-plastic
Description : Air is to be heated by condensing steam. Two heat exchangers are available (i) a shell and tube heat exchanger and (ii) a finned tube heat exchanger. Tube side heat transfer area are equal in both ... steam on shell side (D) Shell and tube heat exchanger with air on shell side and steam inside tubes
Last Answer : (B) Finned tube heat exchanger with air outside and steam inside
Description : In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes
Last Answer : (A) Large temperature differentials
Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary
Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary
Description : Is there a quick rule-of-thumb to estimate a gas side heat-transfer rate inside the tubes of a shell and tube heat exchanger?
Last Answer : If you need to estimate a gas heat transfer rate or see if a program is getting a reasonable gas rate, use the following: h = 75 X Sq. Root(Op. pressure/100) The operating pressure is ... will be lower for the shell side or if there is more than one exchanger. Source: Gulley Computer Associates
Description : What is a good approximation for the heat transfer coefficient of hydrocarbons inside 3/4″ tubes?
Last Answer : Use the following equation to estimate the heat transfer coefficient when liquid is flowing inside 3/4 inch tubing: Hio = 150./sqrt(avg. viscosity) Where: Hio (BTU/ft2-hr-0F Viscosity (cP) this is limited to a maximum viscosity of 3 cP
Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel
Last Answer : (A) Arsenic copper
Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron
Last Answer : (B) Manganese
Description : In case of Drip irrigation which of the following advantage is observed ? (A) It saves water (B) Root system of plant remains in upper layer of soil (C) Plastic tubes are not harmed by rats (D ... drip irrigation is very long (E) Where there is lot of rainfall, there are no limitation to such system
Last Answer : (C) Plastic tubes are not harmed by rats
Description : For turbulent mass transfer in pipes, the Sherwood number depends on the Reynolds number as (A) Re 0.33 (B) Re 0.53 (C) Re 0.83 (D) Re
Last Answer : (C) Re 0.83