An elastomer is a polymer when its percentage elongation rate is ?

An elastomer is a polymer when its percentage elongation rate is ?
by

1 Answer

Answer :

Greater than 100%.
by

Related questions

polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer is termed as 'rubber' if its percentage elongation is more than __________ percent. (A) 150 (B) 200 (C) 300 (D) 400

Description : polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer is termed as 'rubber' if its percentage elongation is more than __________ percent. (A) 150 (B) 200 (C) 300 (D) 400

Last Answer : Option B

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

If percentage elongation of a material is more than 200%, it is classed as ?

Description : If percentage elongation of a material is more than 200%, it is classed as ?

Last Answer : Rubber.

A stress which develops within an object when it attempts to expand or contract in response to a temperature changes, but cannot, due to being held rigidly in place.  a. elongation  b. thermal stress  c. expansion contraction  d. thermal expansion

Description : A stress which develops within an object when it attempts to expand or contract in response to a temperature changes, but cannot, due to being held rigidly in place.  a. elongation  b. thermal stress  c. expansion contraction  d. thermal expansion

Last Answer : thermal stress

Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Description : Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Last Answer : (A) Ductility

In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Last Answer : (A) Percentage elongation

(A) Percentage elongation (B) Yield strength (C) Ultimate strength (D) Area under stress-strain diagram

Description : (A) Percentage elongation (B) Yield strength (C) Ultimate strength (D) Area under stress-strain diagram

Last Answer : (B) Yield strength

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge length was 65mm, what is the elongation percentage? a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36

Description : In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge length was 65mm, what is the elongation percentage? a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36

Last Answer : c) % A is 30

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Description : The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Last Answer : B

What is an elastomer?

Description : What is an elastomer?

Last Answer : What is an elastomer?

Which of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Description : Which of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Last Answer : (D) None of these

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Description : Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Last Answer : (B) A good abrasive

Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Description : Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Last Answer : (A) Thiokol

Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite

Description : Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite

Last Answer : (A) Acrylic sheet

Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Description : Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Last Answer : (A) Is a good adhesive

Which one of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Description : Which one of the following is not an elastomer? (A) Polyisoprene (B) Neoprene (C) Nitrile-butadiene (D) None of these

Last Answer : (D) None of these

An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression material is preferred? A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Last Answer : Nylon-66 is an example of elastomer

Where is thermoplastic elastomer used?

Description : Where is thermoplastic elastomer used?

Last Answer : Thermoplastic elastomers (thermoplastic elastomers, TPE) are widely used due to their unique properties in comparison with other plastics. They are soft, resilient and recoverable. An alternative was needed ... dried before processing. It is necessary that the moisture content does not exceed 0.1%.

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Last Answer : (C) Initial hydrolysis of silicone monomer

Assuming that a planet goes round the sun in a circular orbit of radius `0.5AU` determine the angle of maximum elongation for the planet and its dista

Description : Assuming that a planet goes round the sun in a circular orbit of radius `0.5AU` determine the angle of maximum elongation for the planet and its dista

Last Answer : Assuming that a planet goes round the sun in a circular orbit of radius `0.5AU` determine ... its distance from the earth when elongation is measured.

All the following statements about acetyl CoA carboxylase are true except (A) It is required for de novo synthesis of fatty acids (B) It is required for mitochondrial elongation of fatty acids (C) It is required for microsomal elongation of fatty acids (D) Insulin converts its inactive form into its active form

Description : All the following statements about acetyl CoA carboxylase are true except (A) It is required for de novo synthesis of fatty acids (B) It is required for mitochondrial elongation of fatty acids ( ... for microsomal elongation of fatty acids (D) Insulin converts its inactive form into its active form

Last Answer : Answer : B

__________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Description : __________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Last Answer : (B) Resilience

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material

Description : Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material

Last Answer : c. WL/2E

Structural characteristics of the cells in the elongation zone of the root. -Biology

Description : Structural characteristics of the cells in the elongation zone of the root. -Biology

Last Answer : answer:

Which plant hormone causes cell elongation? -Biology

Description : Which plant hormone causes cell elongation? -Biology

Last Answer : answer:

Which plant hormone causes cell elongation? -Biology

Description : Which plant hormone causes cell elongation? -Biology

Last Answer : answer:

Reappearance of nuclear membrane & nucleolus along with thining & elongation in chromosomes are diagnostic characters for the phase:-

Description : Reappearance of nuclear membrane & nucleolus along with thining & elongation in chromosomes are diagnostic characters for the phase:-

Last Answer : Reappearance of nuclear membrane & nucleolus along with thining & elongation in chromosomes are diagnostic ... B. Metaphase C. Interphase D. Telophase

Elongation of a peptide chain involves all the following except (A) mRNA (B) GTP (C) Formyl-Met-tRNA (D) Tu, TS and G factors

Description : Elongation of a peptide chain involves all the following except (A) mRNA (B) GTP (C) Formyl-Met-tRNA (D) Tu, TS and G factors

Last Answer : Answer : C

Nonsense codons bring about (A) Amino acid activation (B) Initiation of protein synthesis (C) Termination of protein synthesis (D) Elongation of polypeptide chains

Description : Nonsense codons bring about (A) Amino acid activation (B) Initiation of protein synthesis (C) Termination of protein synthesis (D) Elongation of polypeptide chains

Last Answer : Answer : C

Translocase is an enzyme required in the process of (A) DNA replication (B) RNA synthesis (C) Initiation of protein synthesis (D) Elongation of peptides

Description : Translocase is an enzyme required in the process of (A) DNA replication (B) RNA synthesis (C) Initiation of protein synthesis (D) Elongation of peptides

Last Answer : Answer : D

The formation of a peptide bond during the elongation step of protein synthesis results in the splitting of how many high energy bonds? (A) 1 (B) 2 (C) 3 (D) 4

Description : The formation of a peptide bond during the elongation step of protein synthesis results in the splitting of how many high energy bonds? (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : Answer : B

Peptidyl transferase activity is located in (A) Elongation factor (B) A charged tRNA molecule (C) Ribosomal protein (D) A soluble cytosolic protein

Description : Peptidyl transferase activity is located in (A) Elongation factor (B) A charged tRNA molecule (C) Ribosomal protein (D) A soluble cytosolic protein

Last Answer : Answer : C

In eukaryotic cells (A) Formylated tRNA is important for initiation of translation (B) Cyclohexamide blocks elongation during translation (C) Cytosolic ribosomes are smaller than those found in prokaryotes (D) Erythromycin inhibits elongation during translation

Description : In eukaryotic cells (A) Formylated tRNA is important for initiation of translation (B) Cyclohexamide blocks elongation during translation (C) Cytosolic ribosomes are smaller than those found in prokaryotes (D) Erythromycin inhibits elongation during translation

Last Answer : Answer : B

In the process of elongation of chain binding of amino acyl tRNA to the A site requires (A) A proper codon recognition (B) GTP (C) EF-II (D) GDP

Description : In the process of elongation of chain binding of amino acyl tRNA to the A site requires (A) A proper codon recognition (B) GTP (C) EF-II (D) GDP

Last Answer : Answer : A

Epinephrine increases the concentration of free fatty acids in plasma by increasing (A) Extramitochondrial fatty acid synthesis (B) Mitochondrial fatty acid chain elongation (C) Microsomal fatty acid chain elongation (D) Lipolysis in adipose tissue

Description : Epinephrine increases the concentration of free fatty acids in plasma by increasing (A) Extramitochondrial fatty acid synthesis (B) Mitochondrial fatty acid chain elongation (C) Microsomal fatty acid chain elongation (D) Lipolysis in adipose tissue

Last Answer : Answer : D

The major site for elongation of medium chain fatty acids is (A) Mitochondria (B) Cytosol (C) Microsomes (D) All of these

Description : The major site for elongation of medium chain fatty acids is (A) Mitochondria (B) Cytosol (C) Microsomes (D) All of these

Last Answer : Answer : C

The desaturation and chain elongation system of polyunsaturated fatty acid are enhanced by (A) Insulin (B) Glucagon (C) Epinephrine (D) Thyroxine

Description : The desaturation and chain elongation system of polyunsaturated fatty acid are enhanced by (A) Insulin (B) Glucagon (C) Epinephrine (D) Thyroxine

Last Answer : Answer : A

Chain elongation of fatty acids in mammalian liver occurs in (A) Nucleus (B) Ribosomes (C) Lysosomes (D) Microsomes

Description : Chain elongation of fatty acids in mammalian liver occurs in (A) Nucleus (B) Ribosomes (C) Lysosomes (D) Microsomes

Last Answer : Answer : D

Chain elongation of fatty acids occurring in mammalian liver takes place in which of the following subcellular fractions of the cell? (A) Nucleus (B) Ribosomes (C) Lysosomes (D) Microsomes

Description : Chain elongation of fatty acids occurring in mammalian liver takes place in which of the following subcellular fractions of the cell? (A) Nucleus (B) Ribosomes (C) Lysosomes (D) Microsomes

Last Answer : Answer : D

The desaturation and chain elongation system of polyunsaturated fatty acids are greatly diminished in the absence of (A) Insulin (B) Glycagon (C) Epinephrine (D) Thyroxine

Description : The desaturation and chain elongation system of polyunsaturated fatty acids are greatly diminished in the absence of (A) Insulin (B) Glycagon (C) Epinephrine (D) Thyroxine

Last Answer : Answer : A