In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm

In Dry farming, what is the annual rainfall (in mm)
available?
a. A Less than 550 mm
b. B Less than 500 mm
c. C Less than 950 mm
d. D Less than 750 mm
by

1 Answer

Answer :

d. D Less than 750 mm
by

Related questions

Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis.(A) 550(B) 750(C) 950(D) 1150

Description : Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximateanalysis. (A) 550 (B) 750 (C) 950 (D) 1150

Last Answer : (C) 950

Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100

Description : Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100

Last Answer : (B) 750

Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Last Answer : (D) 1400-1450

Dry land farming in India is largely confined to areas with rainfall less than - a. 100 cm b. 85 cm c. 80 cm d. 75 cm

Description : Dry land farming in India is largely confined to areas with rainfall less than - a. 100 cm b. 85 cm c. 80 cm d. 75 cm

Last Answer : d. 75 cm

Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm

Description : Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm

Last Answer : [ D ] 750 mm

Consumptive use of Chenopodium album is a). 200 mm b). 550 mm c). 750 mm d). 1000 mm

Description : Consumptive use of Chenopodium album is a). 200 mm b). 550 mm c). 750 mm d). 1000 mm

Last Answer : b). 550 mm

Soon to be set up India Post Payments Bank will have how many branches in the country? A) 650 B) 550 C) 500 D) 750 E) 600

Description : Soon to be set up India Post Payments Bank will have how many branches in the country? A) 650 B) 550 C) 500 D) 750 E) 600

Last Answer : A) 650 Explanation: The communications and IT minister Ravi Shankar Prasad has said that all 650 branches of the payment bank set up by the department of posts will be established by September 2017.

2/3 part of the sum is lent out at 3%, 1/6 part is lent out at 6% and remaining part at 12%. All the three parts are lent out at simple interest. If the annual income is Rs. 35, what is the sum? (a) Rs.500 (b) Rs.600 (c) Rs.700 (d) Rs.850 (e) Rs.950

Description : 2/3 part of the sum is lent out at 3%, 1/6 part is lent out at 6% and remaining part at 12%. All the three parts are lent out at simple interest. If the annual income is Rs. 35, what is the sum? (a) Rs.500 (b) Rs.600 (c) Rs.700 (d) Rs.850 (e) Rs.950

Last Answer : (c) Rs.700

With reference to India, which one of the following statements is not correct? [IAS 2002] (a) About one-third of the area of the country records more than 750 millimetres of annual rainfall. (b) The dominant source of irrigation in the country is wells (c) Alluvial soil is the predominant type of soil in the northern plains of the country (d) The mountain areas account for about thirty percent of the surface area of the country

Description : With reference to India, which one of the following statements is not correct? [IAS 2002] (a) About one-third of the area of the country records more than 750 millimetres of annual rainfall. (b ... the country (d) The mountain areas account for about thirty percent of the surface area of the country

Last Answer : Ans: (d)

Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Description : Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Last Answer : 1000-1550 oC

The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Description : The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm

Last Answer : (C) 500 mm

Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Description : Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Last Answer : Answer: Option B

While placing of concrete the thickness of each layer for R.C.C. is [ A ] 150 to 300 mm [ B ] 450 mm [ C ] 500 to 750 mm [ D ] 500 mm

Description : While placing of concrete the thickness of each layer for R.C.C. is [ A ] 150 to 300 mm [ B ] 450 mm [ C ] 500 to 750 mm [ D ] 500 mm

Last Answer : [ A ] 150 to 300 mm

In cement pressure grouting holes should be drilled at spacing in both direction at a) 150 – 500 mm b) 450 mm c) 500 – 750 mm* d) 1000 mm

Description : In cement pressure grouting holes should be drilled at spacing in both direction at a) 150 – 500 mm b) 450 mm c) 500 – 750 mm* d) 1000 mm

Last Answer : c) 500 – 750 mm*

Farming in an areas having average annual rainfall of £ 50 cm.

Description : Farming in an areas having average annual rainfall of £ 50 cm.

Last Answer : Ans. Dry farming

Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Description : Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Last Answer : Answer : C

A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM

Description : A four-pole induction motor, operating on three-phase 60 cycle current will operate at approximately ___________. A. 850 RPM B. 1,150 RPM C. 1,750 RPM D. 3,550 RPM

Last Answer : Answer: C

In tractor transmission oil and oil from the steering worm and sector housing should be changed after how many working hours? 1.450 2. 550 3. 650 4. 750

Description : In tractor transmission oil and oil from the steering worm and sector housing should be changed after how many working hours? 1.450 2. 550 3. 650 4. 750

Last Answer : ans 4

The labelled price of a product is Rs 750. If it is sold at a 20% discount, the dealer earns a 25% profit. What is the cost price? 1. Rs 550 2. Rs 450 3. Rs 435 4. Rs 480

Description : The labelled price of a product is Rs 750. If it is sold at a 20% discount, the dealer earns a 25% profit. What is the cost price? 1. Rs 550 2. Rs 450 3. Rs 435 4. Rs 480

Last Answer : 1. Rs 550

Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Last Answer : (B) 160

Cultivation of crops in areas where average annual rainfall is 1150 mm are categories as

Description : Cultivation of crops in areas where average annual rainfall is 1150 mm are categories as

Last Answer : Ans.Rainfed Farming

The annual payment of Rs. 200 in 5 yr at 5% per annum simple interest will discharge a debt of? (a) Rs. 950 (b) Rs. 800 (c) Rs. 1000 (d) Rs. 1250 (e) None of the above

Description : The annual payment of Rs. 200 in 5 yr at 5% per annum simple interest will discharge a debt of? (a) Rs. 950 (b) Rs. 800 (c) Rs. 1000 (d) Rs. 1250 (e) None of the above

Last Answer : e) None of the above

In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Description : In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Last Answer : (B) Between 300 mm and 750 mm

A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Description : A loudspeaker cabinet has an internal volume of 5,184 in3 (84,950 cm3 ). It has a port area on the baffle of 50 in2 (322.58cm2 ) and a thickness of 0.70 in (18 mm). What is the Helmholtz resonance, in hertz, of this loudspeaker enclosure? A. 250 Hz B. 245 Hz C. 240 Hz D. 255 Hz

Last Answer : C. 240 Hz

A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Description : A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Last Answer : B. 245 Hz

Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; Temperature 18°-22°C 5. Rainfall 500-600 mm; Temperature 18°-22°C A B C D (a) 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Last Answer : Ans: (d)

Diameter of pully should be such that it gives the best speed of ........meter/minute at full throtlle: A)500 b)950 C)1500 d)2000

Description : Diameter of pully should be such that it gives the best speed of ........meter/minute at full throtlle: A)500 b)950 C)1500 d)2000

Last Answer : b)950

Which of the following characteristics are associated with the dry monsoon forest of India? 1. Annual rainfall is below 50 cm 2. The trees are short rooted 3. Thorny shrubs and grassland 4. Mango, Mahua, Sisam and Keeker are the prominent trees. (a) 1 and 2 (b) 2 and 4 (c) 3 and 4 (d) 1, 2 and 3

Description : Which of the following characteristics are associated with the dry monsoon forest of India? 1. Annual rainfall is below 50 cm 2. The trees are short rooted 3. Thorny shrubs and grassland 4. Mango, Mahua, Sisam and Keeker are the prominent trees. (a) 1 and 2 (b) 2 and 4 (c) 3 and 4 (d) 1, 2 and 3

Last Answer : Ans: (c)

The area with annual rainfall less than 50 cm in a year is – (1) Meghalaya (2) Leh in Kashmir (3) Coromandel coast (4) Konkan coast

Description : The area with annual rainfall less than 50 cm in a year is – (1) Meghalaya (2) Leh in Kashmir (3) Coromandel coast (4) Konkan coast

Last Answer : (2) Leh in Kashmir Explanation: Rainfall distribution in India is uneven. Areas of Inadequate Rainfall (it implies rainfall less than 50 cm a year): There are basically two belts that receive ... rainfall is also caused in the months of January. February and March by the westerly depressions.

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Last Answer : A. 575

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Last Answer : a) 575

Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Description : Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Last Answer : (C) 550

In — farming income from subsidiary enterprises does not exceed 10 % a. Diversified farming b. Dry farming c. Mixed farming d. Specialized farming

Description : In — farming income from subsidiary enterprises does not exceed 10 % a. Diversified farming b. Dry farming c. Mixed farming d. Specialized farming

Last Answer : c. Mixed farming

To stop exploitation of actual tillers and give them permanent rights – system was introduced (a) Green revolution. (b) Land reform. © Dry land farming. (d) None of the above.

Description : To stop exploitation of actual tillers and give them permanent rights – system was introduced (a) Green revolution. (b) Land reform. © Dry land farming. (d) None of the above.

Last Answer : (b) Land reform.

The enroment of members in a club increased from 500 to 550, Find the percentage increase in enorlment.

Description : The enroment of members in a club increased from 500 to 550, Find the percentage increase in enorlment.

Last Answer : The enroment of members in a club increased from 500 to 550, Find the percentage increase in enorlment.

74 Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes

Description : 74 Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes

Last Answer : ANSWER: B

Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes

Description : Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes

Last Answer : ANSWER: B

A circuit breaker for a 300 KW alternator is rated at 470 amperes of full continuous load. The amount of overcurrent allowed is 125%. Which of the following conditions will trip the breaker? A. Sustained current flow of 470 amperes. B. Sustained current flow of 500 amperes for 10 minutes. C. Momentary starting load of 550 amperes. D. Sustained current flow of 590 amperes.

Description : A circuit breaker for a 300 KW alternator is rated at 470 amperes of full continuous load. The amount of overcurrent allowed is 125%. Which of the following conditions will trip the breaker? A. ... 10 minutes. C. Momentary starting load of 550 amperes. D. Sustained current flow of 590 amperes.

Last Answer : Answer: D

Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 – 3000 mL (B) Inspiratory reserve (ii) 1100 – 1200 mL volume (C) Expiratory reserve (iii) 500 – 550 mL volume (D) Residual volume (iv) 1000 – 1100 mL (A) (B) (C) (D) (a) (iii) (ii) (i) (iv) (b) (iii) (i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 - 3000 mL (B) Inspiratory reserve (ii) 1100 - 1200 mL volume (C) Expiratory reserve (iii ... i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Last Answer : (b) (iii) (i) (iv) (ii)

Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

Ravi borrowed some money at the rate of 4 p.c.p.a. for the first three years, at the rate of 8 p.c.p.a. for the next two years and at the rate of 9 p.c.p.a. for the period beyond 5 years. If he pays a total simple interest of 19,550 at the end of 7 years, how much money did he borrow? a) 39,500 b) 42,500 c) 41,900 d) 43,000 e) None of these

Description : Ravi borrowed some money at the rate of 4 p.c.p.a. for the first three years, at the rate of 8 p.c.p.a. for the next two years and at the rate of 9 p.c.p.a. for the period beyond 5 years. If he pays a ... 7 years, how much money did he borrow? a) 39,500 b) 42,500 c) 41,900 d) 43,000 e) None of these

Last Answer : Let the amount borrowed be Rs P Total amount of simple interest = (P×3×4)/100 + (p×2×8)/100 + (p×2×9)/100 = 19550 0.12P + 0.16P + 0.18P = 19550 0.46p= 19550 P = Rs. 42500 Answer: b)

The sale price of an article including the sale tax is Rs. 616. The rate of sale tax is 10% . If the shopkeeper has made a profit of 12%, the cost price of the article is [The Pearson Guide book] A. Rs 500 B. Rs 515 C. Rs 550 D. Rs 600

Description : The sale price of an article including the sale tax is Rs. 616. The rate of sale tax is 10% . If the shopkeeper has made a profit of 12%, the cost price of the article is [The Pearson Guide book] A. Rs 500 B. Rs 515 C. Rs 550 D. Rs 600

Last Answer : Answer – A. Rs 500 Explanation – 110% of S.P. = 616 = S.P. = Rs.(616 x 100/110) = Rs.560. C.P. = Rs (100/112 x 560) = Rs 500

As per IS:1139, the characteristic yield strength for cold twisted deformed bars is [ A ] 250 N/mm2 [ B ] 415 N/mm2 [ C ] 500 N/mm2 [ D ] 550 N/mm2

Description : As per IS:1139, the characteristic yield strength for cold twisted deformed bars is [ A ] 250 N/mm2 [ B ] 415 N/mm2 [ C ] 500 N/mm2 [ D ] 550 N/mm2

Last Answer : [ C ] 500 N/mm2

As per IS:1139, the characteristic yield strength for hot rolled High yield strength deformed bars is [ A ] 250 N/mm2 [ B ] 415 N/mm2 [ C ] 500 N/mm2 [ D ] 550 N/mm2

Description : As per IS:1139, the characteristic yield strength for hot rolled High yield strength deformed bars is [ A ] 250 N/mm2 [ B ] 415 N/mm2 [ C ] 500 N/mm2 [ D ] 550 N/mm2

Last Answer : [ B ] 415 N/mm2

An investor invested Rs. 5 lakhs in Company Q in 1996. After one year, the entire amount along with the interest was transferred as investment to Company P in 1997 for one year. What amount will be received from Company P, by the investor? A. Rs. 5, 94,550 B. Rs. 5, 80,425 C. Rs. 5, 77,800 D. Rs. 5, 77,500 E. None of these

Description : An investor invested Rs. 5 lakhs in Company Q in 1996. After one year, the entire amount along with the interest was transferred as investment to Company P in 1997 for one year. What amount will be received from Company P, by ... . 5, 80,425 C. Rs. 5, 77,800 D. Rs. 5, 77,500 E. None of these

Last Answer : B. Rs. 5, 80,425

Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Last Answer : a)400-550 rpm

Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm

Last Answer : a) 400 – 550 rpm

Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Last Answer : c) 500*

The monthly incomes of A and B are in the ratio 4:5, their expenses are in the ratio 5 : 6. If 'A' saves Rs.25 per month and 'B' saves Rs.50 per month, what are their respective incomes? A) Rs.400 and Rs.500 B) Rs.240 and Rs.300 C) Rs.320 and Rs.400 D) Rs.440 and Rs.550 E) NONE

Description : The monthly incomes of A and B are in the ratio 4:5, their expenses are in the ratio 5 : 6. If 'A' saves Rs.25 per month and 'B' saves Rs.50 per month, what are their respective incomes? A) Rs.400 and Rs.500 B) Rs.240 and Rs.300 C) Rs.320 and Rs.400 D) Rs.440 and Rs.550 E) NONE

Last Answer : Answer: A Let AA's income be = 4x AA's expenses, therefore = 4x–25 Let BB's income be = 5x BB's expenses, therefore = 5x–50 We know that the ratio of their expenses = 5:6 ⇒24x−150=25x−250 ⇒ Therefore, x=100 A's income =4x=400 and B's income =5x=500