State the functions of slip joint in propeller shaft.

State the functions of slip joint in propeller shaft.
by

1 Answer

Answer :

Function of Slip Joint- It is provided at the gearbox end, this joint allows variation in length of the propeller shaft
by

Related questions

Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Description : Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Last Answer : Necessity of universal joint: ● A universal joint is used where two shafts are connected at an angle to transmit the torque. ● Universal joint is used to transmit motion at varying angles.

The direction of propeller shaft rotation in a turbo-electric synchronous propulsion drive motor is changed by reversing the _____________. A. polarity of the propulsion motor B. polarity of the propulsion generator C. phase sequence of power to the motor D. phase sequence of power to the generator

Description : The direction of propeller shaft rotation in a turbo-electric synchronous propulsion drive motor is changed by reversing the _____________. A. polarity of the propulsion motor B. polarity of the propulsion generator C. phase sequence of power to the motor D. phase sequence of power to the generator

Last Answer : Answer: C

The propeller shaft speed in a turbo-electric, synchronous, propulsion drive motor is changed by varying the __________. A. turbine speed B. number of motor poles C. field strength of the generator D. field strength of the motor

Description : The propeller shaft speed in a turbo-electric, synchronous, propulsion drive motor is changed by varying the __________. A. turbine speed B. number of motor poles C. field strength of the generator D. field strength of the motor

Last Answer : Answer: A

In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Last Answer : 2. engine and clutch

In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Description : In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Last Answer : (A) Engine and clutch

State the function of Slip joint & universal Joint

Description : State the function of Slip joint & universal Joint

Last Answer : 1)Slip joint Functions: When the rear wheel comes across a bump, the spring compresses or expands as the differential with the rear axle housing and the wheel moves up and down. This ... drive changes continuously and universal joint allows transmission of power and rotary motion at a varied angle

State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Description : State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Last Answer : Engine components Material Functions Piston Cat aluminum alloy To transmit the force of explosion to the crankshaft. To form seal so that the high pressure gases in ... atmosphere through the exhaust pipe after combustion stroke is completed. To keep back pressure minimum.

How much carry-on space is there in a propeller plane?

Description : How much carry-on space is there in a propeller plane?

Last Answer : Well, what kind is it?

What is the rotation per second of an aircraft propeller?

Description : What is the rotation per second of an aircraft propeller?

Last Answer : It varies. Here is a calculator

Why are propeller planes so loud if they're so far away?

Description : Why are propeller planes so loud if they're so far away?

Last Answer : Most of the time propeller planes do not have exhaust mufflers. this makes the engine extremely loud. and, since the airplane is on the ground, the earth acts as bouncing board for the airplanes loud ... are not this loud, since they are away from you, away from the ground and in open space.

Who invented the propeller

Description : What was the name of the one who invented the propeller?

Last Answer : Propeller invented by Josef Ressel (Otto Wichterle invented contact lenses): D

A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Description : A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Last Answer : Answer: C

The prime mover of an AC two pole main propulsion generator drives the generator at 3600 RPM. If the main propulsion motor has 80 poles, what will be the propeller speed? A. 45 RPM B. 80 RPM C. 90 RPM D. 180 RPM

Description : The prime mover of an AC two pole main propulsion generator drives the generator at 3600 RPM. If the main propulsion motor has 80 poles, what will be the propeller speed? A. 45 RPM B. 80 RPM C. 90 RPM D. 180 RPM

Last Answer : Answer: C

As shown in the two illustrations for 'pitch control' and engine speed control', when the plant is in 'AUTO / CRUISE' propeller pitch is controlled by ___________. EL-0095 A. the 'trim potentiometer' and speed by either 'thrust lever' B. either 'thrust lever' and speed also by the selected Lever C. the split trim potentiometer and speed by its 'trim pot'. D. either 'thrust lever' and speed by the 'trim potentiometer'

Description : As shown in the two illustrations for 'pitch control' and engine speed control', when the plant is in 'AUTO / CRUISE' propeller pitch is controlled by ___________. EL-0095 A. the 'trim potentiometer' and ... and speed by its 'trim pot'. D. either 'thrust lever' and speed by the 'trim potentiometer'

Last Answer : Answer: D

As shown in the illustration, a 'pitch cutback' feature is incorporated in the system. This circuit reduces pitch amount to prevent engine overload when it senses ____________. EL-0095 A. pitch error of any magnitude B. wrong direction of the 'pitch servo' C. excessive propeller speed or fuel to either engine D. only one engine on the line

Description : As shown in the illustration, a 'pitch cutback' feature is incorporated in the system. This circuit reduces pitch amount to prevent engine overload when it senses ____________. EL-0095 A. pitch error of ... servo' C. excessive propeller speed or fuel to either engine D. only one engine on the line

Last Answer : Answer: C

The 'pitch controller module' shown in the illustration is fed the actual pitch position of the propeller from the _____________. EL-0095 A. 'pitch meter' B. 'pitch feedback potentiometer' C. #5 relay position D. pitch error signal

Description : The 'pitch controller module' shown in the illustration is fed the actual pitch position of the propeller from the _____________. EL-0095 A. 'pitch meter' B. 'pitch feedback potentiometer' C. #5 relay position D. pitch error signal

Last Answer : Answer: B

The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's stray magnetic fields which would interfere with radar C. protect engine room and deck machinery from oxidation in the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Description : The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's ... the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Last Answer : Answer: A

In an AC synchronous motor electric propulsion plant, propeller speed is controlled by varying the _____________. A. prime mover speed B. electric coupling field strength C. number of energized main motor poles D. propulsion generator field strength

Description : In an AC synchronous motor electric propulsion plant, propeller speed is controlled by varying the _____________. A. prime mover speed B. electric coupling field strength C. number of energized main motor poles D. propulsion generator field strength

Last Answer : Answer: A

The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Description : The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Last Answer : (A) Boundary mixer

Which of the following is the most suitable for handling fibrous and dense slurries? (A) Propeller agitator (B) Cone type agitator (C) Turbine agitator

Description : Which of the following is the most suitable for handling fibrous and dense slurries? (A) Propeller agitator (B) Cone type agitator (C) Turbine agitator

Last Answer : (B) Cone type agitator

A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Description : A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Last Answer : (A) Produces mainly axial flow

Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller(B) Helical screw(C) Flat blade turbine(D) Curved blade turbine

Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine

Last Answer : (B) Helical screw

__________ pumps are axial flow pumps. (A) Turbine (B) Propeller (C) Diffuser (D) None of these

Description : __________ pumps are axial flow pumps. (A) Turbine (B) Propeller (C) Diffuser (D) None of these

Last Answer : (B) Propeller

Propeller type centrifugal pumps are most suitable for (A) High capacity at high heads (B) High capacity at low heads (C) Low capacity at high heads (D) Low capacity at low heads

Description : Propeller type centrifugal pumps are most suitable for (A) High capacity at high heads (B) High capacity at low heads (C) Low capacity at high heads (D) Low capacity at low heads

Last Answer : (B) High capacity at low heads

__________ is an example of axial flow impeller. (A) Paddle (B) Turbine (C) Propeller (D) All (A), (B) and (C)

Description : __________ is an example of axial flow impeller. (A) Paddle (B) Turbine (C) Propeller (D) All (A), (B) and (C)

Last Answer : (C) Propeller

Flagella move the cell by A- many flagella beating in a synchronous, whip-like motion B- an individual flagellum beating in a whip-like motion C- spinning like a propeller D-.attaching to nearby particles and contracting

Description : Flagella move the cell by A- many flagella beating in a synchronous, whip-like motion B- an individual flagellum beating in a whip-like motion C- spinning like a propeller D-.attaching to nearby particles and contracting

Last Answer : spinning like a propeller

How is air produced in mechanical draught cooling tower? a) Air Tuyeres b) Propeller fans c) Air blowers d) Louvre

Description : How is air produced in mechanical draught cooling tower? a) Air Tuyeres b) Propeller fans c) Air blowers d) Louvre

Last Answer : Propeller fans

How is air produced in mechanical cooling tower 1 air fan 2 propeller fans 3 air blowers 4 propeller blowers

Description : How is air produced in mechanical cooling tower 1 air fan 2 propeller fans 3 air blowers 4 propeller blowers

Last Answer : 2 propeller fans

How is air produced in mechanical draught cooling tower? A] Air Tuyeres. B] Propeller fans C] Air blowers. D] Louvre

Description : How is air produced in mechanical draught cooling tower? A] Air Tuyeres. B] Propeller fans C] Air blowers. D] Louvre

Last Answer : B] Propeller fans

The advantage of a constant speed propeller over a fixed pitch propeller is: a. Higher maximum thrust available b. Higher maximum efficiency c. More blade surface area available d. Nearly maximum efficiency over wide speed range

Description : The advantage of a constant speed propeller over a fixed pitch propeller is: a. Higher maximum thrust available b. Higher maximum efficiency c. More blade surface area available d. Nearly maximum efficiency over wide speed range

Last Answer : d. Nearly maximum efficiency over wide speed range

Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to remain unchanged b. The propeller control regulates the engine RPM and in turn the propeller RPM c. A high blade angle, or increased pitch, reduces the propeller drag and allows more engine power for take-offs d. As the propeller control setting is changed by the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Description : Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to ... the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Last Answer : b. The propeller control regulates the engine RPM and in turn the propeller RPM

The angle of attack of a fixed pitch propeller: a. Depends on forward speed only b. Depends on forward speed and engine rotational speed c. Depends on engine rotational speed only d. Is constant for a fixed pitch propeller

Description : The angle of attack of a fixed pitch propeller: a. Depends on forward speed only b. Depends on forward speed and engine rotational speed c. Depends on engine rotational speed only d. Is constant for a fixed pitch propeller

Last Answer : b. Depends on forward speed and engine rotational speed

Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Description : Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Last Answer : a.100-120 rpm

What are the equipments used for mixing of liquids? Give in detail about ‘Propeller Mixer’.

Description : What are the equipments used for mixing of liquids? Give in detail about ‘Propeller Mixer’.

Last Answer : Equipments used for mixing of Liquids i .Propeller mixer ii .Turbine mixer iii .Paddle mixer Propeller Mixers Construction: .It consists of vessel and propeller, Propeller usually operates at ... : Application: It is used for mixing of liquids having low viscosity.

Which of the following are functions of bearings? a) Ensure free rotation of shaft with minimum friction b) Holding shaft in a correct position c) Transmit the force of the shaft to the frame d) All of the listed

Description : Which of the following are functions of bearings? a) Ensure free rotation of shaft with minimum friction b) Holding shaft in a correct position c) Transmit the force of the shaft to the frame d) All of the listed

Last Answer : d) All of the listed

Write the functions of : i) Blades – ii) Nacelle – iii) Shaft – iv) Gear box –

Description : Write the functions of : i) Blades – ii) Nacelle – iii) Shaft – iv) Gear box –

Last Answer : i) Blades - Convert wind energy into usable mechanical energy. Aerodynamically optimized structure of blades help to capture maximum wind power even in normal operation. ii) Nacelle - Protects ... high speed - drives the generator. iv) Gear box - Controls rotational speed of generator.

What are the functions of different components of a typical expansion joint?

Description : What are the functions of different components of a typical expansion joint?

Last Answer : In a typical expansion joint, it normally contains the following components: joint sealant, joint filler, dowel bar, PVC dowel sleeve, bond breaker tape and cradle bent. Joint sealant: it seals the ... the joint . Cradle bar: It helps to uphold the dowel bar in position during construction.

Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Description : Explain the loss of prestress due to friction and slip of anchorage and state two remedial measures to avoid them.

Last Answer : Loss due to Friction: This loss occurs only in post-tensioned members. There always exists a certain amount of friction in the jacking and anchoring system and on the walls of the duct. So, ... over-extending the tendon in the prestressing operation by the amount of the draw - in before anchoring

State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Description : State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Last Answer : Name of part Function Stator 1) Stator frame supports the core, terminal box and protects the inner parts. 2) Stator core houses stator winding. 3) Stator winding ... ) Provides facility to connect external resistance to rotor circuit through brushes for starting and control.

State the function of following parts of slip ring induction motor: (i) Slip ring (ii) Fan (iii) Brushes (iv) Frame

Description : State the function of following parts of slip ring induction motor: (i) Slip ring (ii) Fan (iii) Brushes (iv) Frame

Last Answer : Sr. No. Name of part Function 1 Slip ring 1) The rotor winding terminals are permanently connected to the slip rings. 2) Connects external resistance to rotor circuit through ... It provides mechanical support to the entire internal parts of motor. 2) Protects the inner parts.