Differentiate between cross ply and radial-ply tyre.

Differentiate between cross ply and radial-ply tyre.
by

1 Answer

Answer :

Differentiate between cross ply and radial-ply tyre.

image

by

Related questions

Distinguish among radial ply, cross ply & belted bias types tyres

Description : Distinguish among radial ply, cross ply & belted bias types tyres

Last Answer : Sr. No. Radial ply tyre Cross ply tyre Belted bias Type  1 Plies are running radially straight from bead to bead Piles are running diagonally opposite from bead to bead. The basic construction is ... tyre. Costlier than radial ply & cross ply tyre 8

What is the point of 3 and 4 ply toilet paper?

Description : What is the point of 3 and 4 ply toilet paper?

Last Answer : So your finger doesn’t go through.

Why is 1-ply toilet paper better for septic systems when you have to use twice as much per sitting?

Description : Why is 1-ply toilet paper better for septic systems when you have to use twice as much per sitting?

Last Answer : answer:I believe its just a commercial ploy to get customers to buy more of their single sheet toilet paper. I hate single sheet paper. It gives you too many run-through situations. Remember toilet paper that ... by an inch in width? Nope. Double sheet and double rolls is the only way to GO .

Single ply vs. double ply hand spun for a weaving project.

Description : Single ply vs. double ply hand spun for a weaving project.

Last Answer : answer:Singles slant happens in weaving just as it does in knitting. (If you let go of it, does it immediately start to unspin itself, play back on itself, or get into a tangled mess? Then your ... like a Navajo-Churro fleece, that is strong and scratchy but can take a lot of wear and abuse.

When did Seaplanes start to ply in India -General Knowledge

Description : When did Seaplanes start to ply in India -General Knowledge

Last Answer : Prime Minister Narendra Modi inaugurated India's first seaplane service in Gujarat on October 31.

What is the meaning of the word Ply ?

Description : What is the meaning of the word Ply ?

Last Answer : run. Supply , regular commuting, etc.

Flat Foam or Single Ply Roof Repair?

Description : Flat Foam or Single Ply Roof Repair?

Last Answer : form_title=Flat Foam or Single Ply Roof Repair form_header=8663 What is the problem with your roof? (Choose all that apply)*= [] Water leaking into home [] Water stains on ceiling [] Blistering/cracking ... Ply Rubberized () Sprayed Polyurethane Foam () Rolled/torch applied () Other () Don't know"

Generally wooden moulds are made from (A) Ply wood (B) Shishum wood (C) Deodar wood (D) Teak wood

Description : Generally wooden moulds are made from (A) Ply wood (B) Shishum wood (C) Deodar wood (D) Teak wood

Last Answer : Answer: Option B

PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Description : PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Last Answer : d. None of the above

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Which of the following is the oldest period of tim lasting from the beginnings of the earth to approximately 570 million year ago? w) Precambrian x) Pleistocene (pron: ply-sto-sin) y) Miocene (pron: my-o-sin) z) Jurassic

Description : Which of the following is the oldest period of tim lasting from the beginnings of the earth to approximately 570 million year ago? w) Precambrian x) Pleistocene (pron: ply-sto-sin) y) Miocene (pron: my-o-sin) z) Jurassic

Last Answer : ANSWER: W -- PRECAMBRIAN

The type of gene interaction in which the effects of one gene override or mask the effects of other entirely different genes is called: a) linkage b) mutation c) pleitropy (pron: ply-ah-tropy) d) epistasis (pron: eh-pis-te-sis)

Description : The type of gene interaction in which the effects of one gene override or mask the effects of other entirely different genes is called: a) linkage b) mutation c) pleitropy (pron: ply-ah-tropy) d) epistasis (pron: eh-pis-te-sis)

Last Answer : ANSWER: D -- EPISTASIS

Most of the fungi commonly observed are members of this group of fungi, which includes toadstools, mushrooms and puffballs. This group of fungi is known as: a) Phycomycetes (pron: fI-kO-my-seats) b) Ascomycetes (pron: as-kO-my-seats) c) Basidomycetes (pron: beh-sid-E-O-my-seats) d) Plyocetes (pron: ply-O-seats)

Description : Most of the fungi commonly observed are members of this group of fungi, which includes toadstools, mushrooms and puffballs. This group of fungi is known as: a) Phycomycetes (pron: fI-kO-my-seats) b) Ascomycetes ... ) c) Basidomycetes (pron: beh-sid-E-O-my-seats) d) Plyocetes (pron: ply-O-seats)

Last Answer : ANSWER: C -- Basidomycetes

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

The cracks which extend from bark towards the sap wood in the cross section of a tree, are called (A) Radial shakes (B) Star shakes (C) Heart shakes (D) Cup shakes

Description : The cracks which extend from bark towards the sap wood in the cross section of a tree, are called (A) Radial shakes (B) Star shakes (C) Heart shakes (D) Cup shakes

Last Answer : Answer: Option B

Which type of tyre is needed as a visitor to Germany.

Description : Which type of tyre is needed as a visitor to Germany.

Last Answer : Winter tyres are a legal requirement in Germany. This is national legislation and as a visitor you can fit tyres that meet your own country's requirements. However you can be given an on the ... to unsuitable tyres. For example if you are going into mountainous regions you will need snow chains.

Is a spare tyre called a 'stefani tyre'?

Description : Is a spare tyre called a 'stefani tyre'?

Last Answer : answer:This question intrigued me and I think I found a plausible explanation. Perhaps what you are referring to was originally called a Stepney spare wheel. The Stepney Spare Wheel was invented by Thomas Morris ... , can also be called a stepney . A photo is available here (with the above text)

A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Description : A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Last Answer : c. 63.7 m

A tyre manufacturing company kept a record -Maths 9th

Description : A tyre manufacturing company kept a record -Maths 9th

Last Answer : The total number of trials = 1000 (i) P (tyre to be replaced before it covers 4000 km) = 20/1000 = 0.02 (ii) The frequency of a tyre that will last more than 9000 km = 325 + 445 = 770 ∴ P ( ... = 210 + 325 = 535 So, P (tyre requiring replacement between 4000 km and 14000 km) = 535/1000 = 0.535

How many tyre companies work in Pakistan, like maxxis tyer in pakistan?

Description : How many tyre companies work in Pakistan, like maxxis tyer in pakistan?

Last Answer : Maxxis International has provided high-quality tyre products for cars and light trucks, bicycles, motorcycles, ATVs, trailers, karts, industrial and lawn & garden care. maxxis also work in Pakistan maxxis. ... + employees. Maxxis is one of the largest and most respected tyre companies in the world.

What is the name of the gas used to fill in vehicle tyre tubes?

Description : What is the name of the gas used to fill in vehicle tyre tubes?

Last Answer : The normal compressed air used to inflate tyres contains 78% nitrogen, 21% oxygen and 1% other gases but some specialists are now offering inflate tyres with pure nitrogen. Nitrogen is used for less corrosion- because unlike air there's no moisture in pure nitrogen.

Can we use a car tyre with a larger diameter that has the same weight?

Description : Can we use a car tyre with a larger diameter that has the same weight?

Last Answer : You can use different diameter tires on a car as long as the rims still fit around the break rotors. Say your rim is 18 , you could use anything up to 18 on it, like 17 for example. Also keep in ... "touching" area on the ground will be bigger, so the drag will be bigger, making you use more gas.

Do Jeep commander comes with spare tyre? and what is the tyre size?

Description : Do Jeep commander comes with spare tyre? and what is the tyre size?

Last Answer : It has been several years now that new cars don't come with a spare tire. However, if you'd like to add one to your Jeep Commander it is quite simple. You'll need to buy an install kit that mounts the ... 100 miles if you are in the middle of nowhere and can't find a way to change out your tire.

Why BMWs dont have a spare tyre?

Description : Why BMWs dont have a spare tyre?

Last Answer : First off the car manufacturer doesn't design the trunk space to hold a spare tire. But instead will use a brand of tires on their car called Run-Flat tires. These tires are designed to run up ... the need for a spare tire to make cars lighter so they could meet the new fuel efficiency standards.

Why does bicycle tyre burst during summer?

Description : Why does bicycle tyre burst during summer?

Last Answer : Why does bicycle tyre burst during summer?

Find the unit in which car-tyre pressure is measured.

Description : Find the unit in which car-tyre pressure is measured.

Last Answer : Find the unit in which car- tyre pressure is measured.

Why people sometimes reduce the tyre pressure in icy conditions?

Description : Why people sometimes reduce the tyre pressure in icy conditions?

Last Answer : I don't understand the question

Which gas filled in tyre of Plane?

Description : Which gas filled in tyre of Plane?

Last Answer : Helium

Which of the following is used as filler in tyre of rubber? (1) Carbon black (2) Coal (3) Coke (4) Graphite

Description : Which of the following is used as filler in tyre of rubber? (1) Carbon black (2) Coal (3) Coke (4) Graphite

Last Answer : (1) Carbon black Explanation: The most common use (70%) of carbon black is as a pigment and reinforcing phase in automobile tires. Carbon black also helps conduct heat away from the tread and belt area of the tire, reducing thermal damage and increasing tire life.

A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : (2) Adiabatic process Explanation: When a tyre bursts suddenly energy is not immediately transferred between the system and the surrounding. So the process is adiabatic. There sudden expansion of its air ... tyre is cooled. In adiabatic process, heat neither enters the system nor leaves the system.

Car tyre cords are made up of?

Description : Car tyre cords are made up of?

Last Answer : nylon - 66

Which is the World’s largest synthetic rubber and tyre making centre?

Description : Which is the World’s largest synthetic rubber and tyre making centre?

Last Answer : Akron

Which of the following is generally not used as eord for synthetic rubber tyre casing? (A) Dacron (B) Nylon (C) Cellulose (D) None of these

Description : Which of the following is generally not used as eord for synthetic rubber tyre casing? (A) Dacron (B) Nylon (C) Cellulose (D) None of these

Last Answer : (C) Cellulose

A cyclist riding a cycle fitted with a dynamo to a tyre gets bright light in the bulb connected, when he pedals fast. Why?

Description : A cyclist riding a cycle fitted with a dynamo to a tyre gets bright light in the bulb connected, when he pedals fast. Why?

Last Answer : More magnetic lines of force change with respect to the coil, leading to more current being produced.

Which of the following is an example of Inorganic Growth? A. Book Publisher making entry into Stationery retailing B. Soap manufacturer launching a Hand Sanitizer C. Car Manufacturer acquiring a Tyre Manufacturer D. All of the above

Description : Which of the following is an example of Inorganic Growth? A. Book Publisher making entry into Stationery retailing B. Soap manufacturer launching a Hand Sanitizer C. Car Manufacturer acquiring a Tyre Manufacturer D. All of the above

Last Answer : Car Manufacturer acquiring a Tyre Manufacturer

Rigidity factor for a tyre pressure greater than 7 kg/cm² is (A) Equal to 1 (B) Less than 1 (C) Greater than 1 (D) Zero

Description : Rigidity factor for a tyre pressure greater than 7 kg/cm² is (A) Equal to 1 (B) Less than 1 (C) Greater than 1 (D) Zero

Last Answer : Answer: Option B

Tyre pressure influences the (A) Total depth of pavement (B) Quality of surface course (C) Both the above (D) None of the above

Description : Tyre pressure influences the (A) Total depth of pavement (B) Quality of surface course (C) Both the above (D) None of the above

Last Answer : Answer: Option B

The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Description : The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Last Answer : (D) 75 and 83

Tractive coefficient of a Crawler truck in loose soil is (a) Less than that of rubber tyre tractors (b) More than that of rubber tyre tractors (c) Same as that of rubber tyre tractors (d) Nearly zero

Description : Tractive coefficient of a Crawler truck in loose soil is (a) Less than that of rubber tyre tractors (b) More than that of rubber tyre tractors (c) Same as that of rubber tyre tractors (d) Nearly zero

Last Answer : (d) Nearly zero

The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Description : The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Last Answer : b. Store fluid under pressure

The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Description : The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Last Answer : b. Store fluid under pressure

Flat tyre causes maximum damage at a speed of (a) 90 to 100 kmph (b) 25 to 30 kmph* (c) 10 to 15 kmph (d) 15 to 20 kmph

Description : Flat tyre causes maximum damage at a speed of (a) 90 to 100 kmph (b) 25 to 30 kmph* (c) 10 to 15 kmph (d) 15 to 20 kmph

Last Answer : (b) 25 to 30 kmph*

The Kellys are on a family outing. As they approach Bellvue Zoo, a tyre on their car is punctured by a metal object on the road. Using the spare, they drive to the next petrol station, where they buy a new tyre. Here the buying process was affected by:A)cognitive dissonance B)a situational factor C)an internal search factor D)framing E)a cognitive factor

Description : The Kellys are on a family outing. As they approach Bellvue Zoo, a tyre on their car is punctured by a metal object on the road. Using the spare, they drive to the next petrol station, ... A)cognitive dissonance B)a situational factor C)an internal search factor D)framing E)a cognitive factor

Last Answer : B)a situational factor

Select a tyre for sports bike and justify it with illustrations.

Description : Select a tyre for sports bike and justify it with illustrations.

Last Answer : Criteria for selecting tyre for Sports bike : 1. Road Grip: It should have a very good grip of road surface on hot/ cold/ wet/ dry/ gravel road surface while travelling straight or cornering. 2. ... Tubeless Tyre (TT) Tyre pressure: front- 32 psi and rear 36 to 38 psi High sectional width  

Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Description : Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Last Answer : This type of tyre does not need separate tube, instead the air under pressure is filled in the tyre for which purpose a non return valve is fitted to the rim. The tyre is directly mounted on the ... safety:- in case of puncture air defuses slowly which provide safety to driver as well as other.

Which of the following is used as filler in tyre of rubber ? (1) Carbon black (2) Coal (3) Coke (4) Graphite

Description : Which of the following is used as filler in tyre of rubber ? (1) Carbon black (2) Coal (3) Coke (4) Graphite

Last Answer : Carbon black

A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Description : A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process

Last Answer : Adiabatic process

A motor bike tyre has two punctures. The 1st puncture alone would have made the tyre flat in 27 minutes and the 2nd alone would have done it in 18 minutes. If air leaks out at a constant rate, how long does it take both the punctures together to make it flat? a) 20 4/3 minutes b) 15 4/7 minutes c) 10 4/5 minutes d) 25 4/3 minutes

Description : A motor bike tyre has two punctures. The 1st puncture alone would have made the tyre flat in 27 minutes and the 2nd alone would have done it in 18 minutes. If air leaks out at a constant rate, how long does it take ... flat? a) 20 4/3 minutes b) 15 4/7 minutes c) 10 4/5 minutes d) 25 4/3 minutes

Last Answer : C 1st puncture made the tyre flat in 27 mins 2nd puncture made the tyre flat in 18 mins 1 minute’s work of both the punctures = (1/27 + 1/18) =(2+3)/54 =5/54 So, both the punctures will make the tyre flat in 54/5 mins =>10 4/5 minutes

State the effect of Inflation pressure on the life of the tyre. With a sketch explain tyre rotation procedure and its necessity.

Description : State the effect of Inflation pressure on the life of the tyre. With a sketch explain tyre rotation procedure and its necessity.

Last Answer : Effects of Under-inflation: 1. Uneven tread wear, more wear at tyre sides. 2. Lack of directional stability. 3. Increased rolling resistance leading to increased fuel consumption. 4. ... axle, while the drive axle tyres are brought straight to the free rolling axle (without crossing).