Distinguish among radial ply, cross ply & belted bias types tyres

Distinguish among radial ply, cross ply & belted bias types tyres
by

1 Answer

Answer :

Sr. No.
Radial ply tyre
Cross ply tyre
Belted bias Type 
1 Plies are running radially straight from bead to bead
Piles are running diagonally opposite from bead to bead.
The basic construction is like the bias-ply but for strengthening belt plies are added in the tread area the cord in belt run at an angle of 20o to 35o to the centre line of tire tread 
2 Stiffness of tyre is less, so it gives ultimate comfort at high speed.
Stiffness of tyre is more, so less comfortable.
Stiffness of tyre is moderate 
3 Steering is harder.
Steering is easy. 
Steering is moderate
4 Tyre has firm grip with road.
Tyre has lesser grip with road. 
holds the tyre flatter thus provides good grip and safety
5 Radial ply tyre has more tread life.
Cross ply tyre has less tread life.
Belted bias tyre has more life than radial & cross ply tyres 
6 More braking grip.
Less braking grip. 
More braking grip
7 Costlier than cross ply tyre
Cheaper than radial ply tyre.
Costlier than radial ply & cross ply tyre
8 image
image
image
by

Related questions

Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Description : Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Last Answer : This type of tyre does not need separate tube, instead the air under pressure is filled in the tyre for which purpose a non return valve is fitted to the rim. The tyre is directly mounted on the ... safety:- in case of puncture air defuses slowly which provide safety to driver as well as other.

Compare dry clutch & wet clutch on basis of

Description : Compare dry clutch & wet clutch on basis of

Last Answer : Parameter Dry Clutch Wet Clutch Construction When the clutch is operated dry i.e. without oil, it is called as a dry clutch. When the clutch is operated in an oil bath, it is ... , Bus, Truck etc. Multi-plate clutch is used in motor cycles, racing cars, heavy duty vehicles.

Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Description : Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Last Answer : Fig:- Front EngineRear Wheel Drive Vehicle Layout

State the function of Slip joint & universal Joint

Description : State the function of Slip joint & universal Joint

Last Answer : 1)Slip joint Functions: When the rear wheel comes across a bump, the spring compresses or expands as the differential with the rear axle housing and the wheel moves up and down. This ... drive changes continuously and universal joint allows transmission of power and rotary motion at a varied angle

Differentiate between cross ply and radial-ply tyre.

Description : Differentiate between cross ply and radial-ply tyre.

Last Answer : Differentiate between cross ply and radial-ply tyre.

Describe with neat sketch working of full floating type.

Description : Describe with neat sketch working of full floating type.

Last Answer : Fig:- full floating Rear axle Explanation: The figure shows the full floating axle. The wheel is on the axle casing. Two roller bearings are between the wheel and axle casing. ... supported by the wheel and the axle casing. Fully floating rear axle is used in heavy commercial vehicles 

Describe a method of lubrication for rear axle assembly of the truck.

Description : Describe a method of lubrication for rear axle assembly of the truck.

Last Answer : The combined lubrication system is very important in the final drive axle, where load and or speed transferred are high, the combination of splash and force feed of lubricant is delivered to ... trickles down due to gravity into the sump, where it is collected again and the cycle repeats  

Describe with schematic diagram working of constant mesh gearbox

Description : Describe with schematic diagram working of constant mesh gearbox

Last Answer : -In constantmesh gearbox all the gears on the mainshaft are constantly mesh with layshaft gear & freely rotate on mainshaft. -When the clutch is in engaed position & gears ... than direction of mainshaft becomes reverse & reverse gear ratio obtained which is near about 3:1

Describe with sketch the method of lubrication of synchromesh gearbox

Description : Describe with sketch the method of lubrication of synchromesh gearbox

Last Answer : Splash lubrication system : The splash lubricating system is simple to manufacture and implement in synchromesh gearbox. Lay shaft gear revolutions splash up lubricant from the sump to provide adequate ... the gear box 3. Selector mechanism is lubricated by thin machine oil/engine oil

In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Description : In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Last Answer : Reason of synchromesh gear box preferred over constant mesh gearbox  1) No need of double declutching as in case of constant mesh gearbox.  2) Smooth engagement of higher gears due to synchromesh ... lay shaft gears to main shaft gear and then to the main shaft through synchronizer device 

What are the different materials used for clutch lining? State its necessity.

Description : What are the different materials used for clutch lining? State its necessity.

Last Answer : Material:- 1. Leather 2. Cork 3. Fabric 4. Asbestos 5. Reybestos and Ferodo 6. Non- asbestos clutch lining material Necessity:- 1. It should have good anti fading characteristic 2. It should have longer life. 3. It should be nonpolluting. 4. It should have lesser cost

Describe with neat sketch construction details of clutch plate.

Description : Describe with neat sketch construction details of clutch plate.

Last Answer : Fig:- Single Plate Clutch Constructional details : It consist of steel plate with a splined central hub. Annular friction facing are attached to the steel plates by rivets. Special resins are ... are similar type of slots in each of the two plates situated on either side of the hub flang 

Describe advantages of torque converter over manual transmission system

Description : Describe advantages of torque converter over manual transmission system

Last Answer : Advantages of torque converter : 1. Torque converter varies gear ratio in the range of 3:1 to 1:1 in infinite no. of stages which gives uniform acceleration 2. No need of operating ... avoiding manual interference of gear changing. 4. It allows starting & stopping vehicle without any difficulty.

Describe the working of motorcycle clutch with neat sketch.

Description : Describe the working of motorcycle clutch with neat sketch.

Last Answer : Working : While the flywheel is rotating the pressure plates rotate and press against the friction plate. This causes the friction plates and thus the clutch shaft to rotate as well. When the pedal is ... they are not fully pressed by pressure plates. Thus the shaft also stops rotation. 

Illustrate with the sketch functional relationship of major components of power transmission system

Description : Illustrate with the sketch functional relationship of major components of power transmission system

Last Answer : Fig:- major assembly & There location on chassis frame 1. Chassis Frame: - it is backbone of vehicle. all sub systems mounted on chassis frame 2. Engine:-it is heart of vehicle ... 7. Wheels & Tyres:-it carry weight of vehicle , transmit driving thrust, absorb road shocks

Explain construction of Hotchkiss drive with suitable sketch

Description : Explain construction of Hotchkiss drive with suitable sketch

Last Answer : Hotchkiss drive: Explanation: Construction:- This drive is invented by Albert Hotchkiss. In the Hotchkiss drive two universal joints are used one at front and second at rear end of propeller shaft ... torque reaction leaf spring deflects. It is used in heavy duty vehicles like bus and trucks.

Describe working of continuously variable transmission with suitable sketch

Description : Describe working of continuously variable transmission with suitable sketch

Last Answer : A Vario-drive consists of two set of split pulleys - drive and driven pulley and drive belt between the pulleys. The drive pulley is fitted to the crankshaft and driven to rear wheel ... driven pulley gets decreased thus a reduced drive ratio between the driven and drive pulleys is obtained.

Describe with schematic sketch working of Vacuum operating clutch mechanism

Description : Describe with schematic sketch working of Vacuum operating clutch mechanism

Last Answer : Fig:- Vacuum Operated Clutch linkage -Vacuum operated clutch linkage operated by engine Vacuum created during suction stroke -It consists of vacuum reservoir tank connected to engine ... piston & plunger which further connected to release fork & release bearing as shown in fig

Explain any one type of Frame section with neat sketch

Description : Explain any one type of Frame section with neat sketch

Last Answer : four section of chassis frame with their merits Channel Section: The channel section is used for making the long members of the frame. It provides a good resistance to bending. It is poor ... to torsional loading (twisting) and they shall not use in the cases where torsion is dominant. 

Explain the concept of Aspect Ratio.

Description : Explain the concept of Aspect Ratio.

Last Answer : Aspect Ratio: The aspect ratio of a tyre is the height of the tyre sidewall expressed as a percentage of the tyre’s width. For example, a tyre with a profile/aspect ratio of 65, is a tyre whose height is equal to 65% of its width. 

State the purpose of Transfer case

Description : State the purpose of Transfer case

Last Answer : 1. Transfer case is used in four wheel drive vehicle along with main gearbox to transmit torque and power to the rear axle. 2. It enables the driver to drive the vehicle in two wheel drives on ... applications.  3. It also enables to drive the vehicle in high gear or low gear whenever required.

Write a function of Automobile Clutch

Description : Write a function of Automobile Clutch

Last Answer : To engage and disengage the engine power from transmission as required when the vehicle is to stop by applying brakes. To facilitate the easy gear shifting from 1st to 2nd or from ... in transmission by providing suitable means. To reduce the vibrations during high speed power transmission

Enlist different material used in Frames

Description : Enlist different material used in Frames

Last Answer : 1) Mild steel 2) Carbon steel 3) Nickel alloy steel 4) Aluminum alloy. 02 

State the necessity of Frame in Automobile.

Description : State the necessity of Frame in Automobile.

Last Answer : 1. To support the body and chassis components such as engine, gear box, axles, suspension system, braking system etc. 2. To withstand different types of loads acting on it

Does Polo Ralph Lauren make shorts with standard-rise belted waist with a button fly closure or is it only zip fly closure?

Description : Does Polo Ralph Lauren make shorts with standard-rise belted waist with a button fly closure or is it only zip fly closure?

Last Answer : They make zip fly closures only, but if you call them and generate enough interest they might make button fly closured ones.

Cables, generally used beyond 66 kV are (a) oil filled (b) S.L. type (c) belted (d) armoured

Description : Cables, generally used beyond 66 kV are (a) oil filled (b) S.L. type (c) belted (d) armoured

Last Answer : (a) oil filled

Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Description : Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Last Answer : (D) Buty

What is the point of 3 and 4 ply toilet paper?

Description : What is the point of 3 and 4 ply toilet paper?

Last Answer : So your finger doesn’t go through.

Why is 1-ply toilet paper better for septic systems when you have to use twice as much per sitting?

Description : Why is 1-ply toilet paper better for septic systems when you have to use twice as much per sitting?

Last Answer : answer:I believe its just a commercial ploy to get customers to buy more of their single sheet toilet paper. I hate single sheet paper. It gives you too many run-through situations. Remember toilet paper that ... by an inch in width? Nope. Double sheet and double rolls is the only way to GO .

Single ply vs. double ply hand spun for a weaving project.

Description : Single ply vs. double ply hand spun for a weaving project.

Last Answer : answer:Singles slant happens in weaving just as it does in knitting. (If you let go of it, does it immediately start to unspin itself, play back on itself, or get into a tangled mess? Then your ... like a Navajo-Churro fleece, that is strong and scratchy but can take a lot of wear and abuse.

When did Seaplanes start to ply in India -General Knowledge

Description : When did Seaplanes start to ply in India -General Knowledge

Last Answer : Prime Minister Narendra Modi inaugurated India's first seaplane service in Gujarat on October 31.

What is the meaning of the word Ply ?

Description : What is the meaning of the word Ply ?

Last Answer : run. Supply , regular commuting, etc.

Flat Foam or Single Ply Roof Repair?

Description : Flat Foam or Single Ply Roof Repair?

Last Answer : form_title=Flat Foam or Single Ply Roof Repair form_header=8663 What is the problem with your roof? (Choose all that apply)*= [] Water leaking into home [] Water stains on ceiling [] Blistering/cracking ... Ply Rubberized () Sprayed Polyurethane Foam () Rolled/torch applied () Other () Don't know"

Generally wooden moulds are made from (A) Ply wood (B) Shishum wood (C) Deodar wood (D) Teak wood

Description : Generally wooden moulds are made from (A) Ply wood (B) Shishum wood (C) Deodar wood (D) Teak wood

Last Answer : Answer: Option B

PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Description : PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Last Answer : d. None of the above

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Which of the following is the oldest period of tim lasting from the beginnings of the earth to approximately 570 million year ago? w) Precambrian x) Pleistocene (pron: ply-sto-sin) y) Miocene (pron: my-o-sin) z) Jurassic

Description : Which of the following is the oldest period of tim lasting from the beginnings of the earth to approximately 570 million year ago? w) Precambrian x) Pleistocene (pron: ply-sto-sin) y) Miocene (pron: my-o-sin) z) Jurassic

Last Answer : ANSWER: W -- PRECAMBRIAN

The type of gene interaction in which the effects of one gene override or mask the effects of other entirely different genes is called: a) linkage b) mutation c) pleitropy (pron: ply-ah-tropy) d) epistasis (pron: eh-pis-te-sis)

Description : The type of gene interaction in which the effects of one gene override or mask the effects of other entirely different genes is called: a) linkage b) mutation c) pleitropy (pron: ply-ah-tropy) d) epistasis (pron: eh-pis-te-sis)

Last Answer : ANSWER: D -- EPISTASIS

Most of the fungi commonly observed are members of this group of fungi, which includes toadstools, mushrooms and puffballs. This group of fungi is known as: a) Phycomycetes (pron: fI-kO-my-seats) b) Ascomycetes (pron: as-kO-my-seats) c) Basidomycetes (pron: beh-sid-E-O-my-seats) d) Plyocetes (pron: ply-O-seats)

Description : Most of the fungi commonly observed are members of this group of fungi, which includes toadstools, mushrooms and puffballs. This group of fungi is known as: a) Phycomycetes (pron: fI-kO-my-seats) b) Ascomycetes ... ) c) Basidomycetes (pron: beh-sid-E-O-my-seats) d) Plyocetes (pron: ply-O-seats)

Last Answer : ANSWER: C -- Basidomycetes

The use of multiple observers to allow cross-checking of observations to make sure that the investigators agree with what took place is known as a. Interpretive validity b. Researcher bias c. Multiple operationalism d. Investigator triangulation

Description : The use of multiple observers to allow cross-checking of observations to make sure that the investigators agree with what took place is known as a. Interpretive validity b. Researcher bias c. Multiple operationalism d. Investigator triangulation

Last Answer : d. Investigator triangulation

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

The cracks which extend from bark towards the sap wood in the cross section of a tree, are called (A) Radial shakes (B) Star shakes (C) Heart shakes (D) Cup shakes

Description : The cracks which extend from bark towards the sap wood in the cross section of a tree, are called (A) Radial shakes (B) Star shakes (C) Heart shakes (D) Cup shakes

Last Answer : Answer: Option B

What's the difference between "winter" and "summer" tyres?

Description : What's the difference between "winter" and "summer" tyres?

Last Answer : Yes, the special design is the design/width/depth/position and design of the treads in the tire, that allow them to contain more ice and snow (or mud) before losing their stability, and also ... more factors that are much more likely to have contributed to the accident than the build of your tires.

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

Which is used as a filler in rubber tyres ? -Do You Know?

Description : Which is used as a filler in rubber tyres ? -Do You Know?

Last Answer : answer:

What are the pros and cons of nitrogen filled tyres?

Description : What are the pros and cons of nitrogen filled tyres?

Last Answer : Nitrogen filled tyres are said to be having an ability to keep constant tyre pressure. Nitrogen has a lesser impact on thermal expansion when compared to ordinary air filled tyre. This pecularity of nitrogen ... is supposed to travel long distances. It's acts just like a cooling agent to the tyres.

Why does the pressure in the automobile tyres change during hot summer or winter season?

Description : Why does the pressure in the automobile tyres change during hot summer or winter season?

Last Answer : Why does the pressure in the automobile tyres change during hot summer or winter season?

The gas used for inflating the tyres of aeroplanes is

Description : The gas used for inflating the tyres of aeroplanes is

Last Answer : The gas used for inflating the tyres of aeroplanes is A. Ar B. He C. `H_(2)` D. `N_(2)`

Accupuncture is - (1) a disease of heart (2) servicing of tubes and tyres (3) a treatment method with needles (4) a crop culture

Description : Accupuncture is - (1) a disease of heart (2) servicing of tubes and tyres (3) a treatment method with needles (4) a crop culture

Last Answer : (3) a treatment method with needles Explanation: Acupuncture is an alternative medicine methodololv originating in ancient China that treats patients by manipulating thin, solid needles that have been ... these points can correct imbalances in the flow of qi through channels known as meridians.