The international radio consultative committee is referred to in international radio
communication as ______.
A. IRCC
B. ITU
C. IRR
D. CCIR

1 Answer

Answer :

D. CCIR

Related questions

Description : Which conference in the ITU-structure does the telecommunication standardization bureau report? A. World telecommunication standardization conference B. ITU-development sector C. Radio regulation board D. The secretary general

Last Answer : A. World telecommunication standardization conference

Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Last Answer : D. Type of information to be transmitted

Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Last Answer : D. Type of modulation of the main carrier

Description : Frequencies above ______ kHz, are referred to as the radio frequencies. A. 20 B. 2 C. 10 D. 200

Last Answer : A. 20

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

Description : A Panchayat Samiti at the block level in India is only a/an - (1) Advisory Body (2) Consultative Committee (3) Coordinating and Supervisory Authority (4) Administrative Authority

Last Answer : (3) Coordinating and Supervisory Authority Explanation: A Panchayat Samiti at, the block level in India is only a Coordinating and Supervisory Authority.

Description : In what way does the Indian Parliament exercise control over the administration? (1) Through Parliamentary Committee (2) Through Consultative Committee of various ministers (3) By making the administration send periodic reports (4) By compelling the executives to issue writs

Last Answer : (1) Through Parliamentary Committee Explanation: Parliament supervises the Activities of the executives with the help of its committees like committees on Govt. assurance, committees on subordinate legislation, ... and they cease to exist as soon as they complete the task assigned to them.

Description : Which one of the following committees is NOT a Standing Committee of the Parliament? (1) Public Accounts Committee (2) Estimates Committee (3) Committee on Public Undertakings (4) Consultative Committee to the Ministry of Finance

Last Answer : (4) Consultative Committee to the Ministry of Finance Explanation: Each House of Parliament has standing committees which are permanent and regular committees and are constituted from time to ... Financial Committees, DRSCs and some other Committees come under the category of Standing Committees.

Description : Communication issues at the international level are addressed by (A) ILO (B) ITU (C) UNDP (D) UNESCO

Last Answer : Answer: D

Description : How may satellite orbital slots are requested by the Philippine Government from ITU? A. 2 B. 4 C. 6 D. 8

Last Answer : C. 6

Description : And ITU-T specification code that deals with the telephone circuits. A. X series B. T series C. V series D. I series

Last Answer : C. V series

Description : Which of the following is the new name of CCITT? A. ITU-T B. ITU-R C. ITU-S D. ITU-D

Last Answer : A. ITU-T

Description : Which is not an ITU sector? A. ITU-W B. ITU-R C. ITU-T D. ITU-D

Last Answer : A. ITU-W

Description : Any governmental office responsible in discharging the obligations undertaken in the convention of the ITU and the regulation. A. Administration B. The union C. Country D. Telecommunications office

Last Answer : A. Administration

Description : How many satellite orbital slots are requested by the Philippine government from ITU? A. 2 B. 6 C. 5 D. 3

Last Answer : B. 6

Description : Which of the following is referred to as a radio emission without sidebands A. Analog B. Carrier C. Data D. Voice

Last Answer : B. Carrier

Description : Referred to as the stage in the radio receiver that contributes most of the noise. A. IF amplifier B. Supply stage C. Speaker D. Mixer

Last Answer : D. Mixer

Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Last Answer : C. Land station

Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Last Answer : A. Carrier power

Description : This is referred to as a fixed radio station that broadcasts program material from studio to transmitter by radio link. A. Aural BC intercity relay B. Aural broadcast STL C. Shortwave station D. Remote-pickup

Last Answer : B. Aural broadcast STL

Description : Term in communication which is referred, “to send out in all direction”. A. Announce B. Broadcast C. Transmit D. Media

Last Answer : B. Broadcast

Description : In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Last Answer : B. 0% modulation

Description : Which NTC memorandum circular governs the rules and regulations about the manufacture, acquisition, sale and service of radio communication equipment? A. MC No. 2-05-88 B. MC No. 2-04-88 C. MC No. 2-07-88 D. MC No. 2-09-88

Last Answer : A. MC No. 2-05-88

Description : Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile

Last Answer : C. Mobile service

Description : The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Last Answer : D. Modem

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

Description : In radio High frequency communications the higher the radio frequency the ______. A. Higher it can reach B. Shorter it can reach C. Effect is null D. Longer it can reach

Last Answer : D. Longer it can reach

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : ATM

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

Last Answer : In CCIR system B standard, the line frequency 15,625 lines/sec.

Last Answer : Number of picture frames displayed per second in TV as per CCIR B-system is : 25.

Description : This is a supervisory style which involves high-directive–high-supportive behavior (HD–HS) and is appropriate when interacting with moderate-capability employees. (a) autocratic style ; (b) participative style ; (c) consultative style ; (d) laissez-faire style

Last Answer : (c) consultative style ; 

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

Description : The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Last Answer : A. station keeping

Description : What frequency band is referred to as the metric waves? A. VHF B. UHF C. HF D. SHF

Last Answer : A. VHF

Description : _______ is referred as the difference between available power and power budget? A. Fade margin B. Power margin C. Nominal gain D. Power dissipation

Last Answer : B. Power margin

Description : Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Last Answer : C. Modem

Description : In modulation technique, which of the following is referred to audible pitch? A. Width B. Frequency C. Harmonic D. Amplitude

Last Answer : B. Frequency

Description : One of the advantages of fiber optic which is referred to the volume of capacity of signals it can carry. A. Security B. Weight C. Bandwidth D. Physical size

Last Answer : C. Bandwidth

Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Last Answer : C. Dynamic instability

Description : What kind of effect is referred to a varying light producing a varying voltage output of a detector? A. Current effect B. Voltage effect C. Resistive effect D. Photovoltaic effect

Last Answer : D. Photovoltaic effect

Description : Referred to an oscillator signal “leak through” from a properly neutralized amplifier such as a master oscillator power amplifier. A. Carrier B. Stray signal C. Back wave D. Loss wave

Last Answer : C. Back wave

Description : One of the following is referred to as a major component of an optical time domain reflectometer A. Pulse generator and vertical plate B. Laser and horizontal plate C. Pulse generator laser D. Vertical and horizontal plate

Last Answer : C. Pulse generator laser

Description : In shipboard satellite dish antennas system, azimuth is referred as the _______. A. 0 to 90 degrees B. Vertical aiming of the antenna C. North to East D. Horizontal aiming of the antenna

Last Answer : D. Horizontal aiming of the antenna

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

Description : In television broadcasting vivid strong colors are often referred as _______. A. Saturation B. Hue C. Chrominance D. Luminance

Last Answer : A. Saturation

Description : A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 ... ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Last Answer : D. 2.6