Operation Carried Out In Thermal Power Stations?

Operation Carried Out In Thermal Power Stations?
by

1 Answer

Answer :

The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine , the turbine which is coupled with the generator generates the electricity.
by

Related questions

Describe the operation carried out in Thermal power stations?

Description : Describe the operation carried out in Thermal power stations?

Last Answer : A:The water is boiled in the boiler with the help of coal. This generates steam. This steam is allowed to hit the turbine hence the turbine rotates. The turbine is coupled with generator. So the mechanical energy of turbine is converted to electrical energy by Generator.

Operation carried out in Thermal power station?

Description : Operation carried out in Thermal power station?

Last Answer : The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine; the turbine which is coupled with the generator generates the electricity

What are the operation carried out in Thermal power station?

Description : What are the operation carried out in Thermal power station?

Last Answer : A: The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine, the turbine which is coupled with the generator generates the electricity

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

In large thermal power stations very fine particulates present in flue gas are removed by (A) Wet scrubber (B) Bag filter (C) Electrostatic precipitators (D) Dust catcher

Description : In large thermal power stations very fine particulates present in flue gas are removed by (A) Wet scrubber (B) Bag filter (C) Electrostatic precipitators (D) Dust catcher

Last Answer : (C) Electrostatic precipitators

Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Description : Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Last Answer : All of the above.

Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Description : Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Last Answer : Answer: Option B

Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Description : Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Last Answer : Answer: A

Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Description : Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Last Answer : Answer: B

The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Description : The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Last Answer : Answer: B

What are the base load and peak load power stations?

Description : What are the base load and peak load power stations?  

Last Answer : During certain periods the load demands are very high. Example the morning when all factories operate. During these time certain power plants like thermal plants gives this extra power required. ... easily stopped or restated. Nuclear power station comes under Base load power station category.  

Which of the following regulates the ownership and operation of radio and television stations in the country? A. PD 576-A B. PD 756 C. PD 657 D. PD 677

Description : Which of the following regulates the ownership and operation of radio and television stations in the country? A. PD 576-A B. PD 756 C. PD 657 D. PD 677

Last Answer : A. PD 576-A

A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Description : A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Last Answer : D. Dept. order 88

Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile

Description : Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile

Last Answer : C. Mobile service

What are the tests to be carried out during DC high voltage test on power cables?

Description : What are the tests to be carried out during DC high voltage test on power cables? 

Last Answer : DC high voltage testing. During DC high voltage testing flow of following currents will take place. a. Capacitance charging current. b. Dielectric absorption current. c. Surface leakage current. d. Partial discharge current (corona). e. Volumetric leakage current. 

How is thermal insulation carried out in modern construction?

Description : How is thermal insulation carried out in modern construction?

Last Answer : The rise in the cost of utilities and heat energy makes today more and more often think about ways to protect buildings from heat loss. And this is no coincidence, because in this way you can ... , glue insulation, reinforce the surface. But the final finishing should still be done in warm weather.

In a power plant, coal is carried from storage place to boilers generally by means of (A) bucket (B) V-belts (C) trolleys (D) manually.

Description : In a power plant, coal is carried from storage place to boilers generally by means of (A) bucket (B) V-belts (C) trolleys (D) manually.

Last Answer : Ans: B

The size of a conductor used in power cables depends on the (A) operating voltage. (B) power factor. (C) current to be carried. (D) type of insulation used.

Description : The size of a conductor used in power cables depends on the (A) operating voltage. (B) power factor. (C) current to be carried. (D) type of insulation used.

Last Answer : (C) current to be carried.

Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Description : Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Last Answer : (A) Constant rate

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

In erect groundnut variety drum rolling operation is carried out at — DAS. a. 30 to 45 b. 45 to 55 c. 55 to 60 d. After 60

Description : In erect groundnut variety drum rolling operation is carried out at — DAS. a. 30 to 45 b. 45 to 55 c. 55 to 60 d. After 60

Last Answer : c. 55 to 60

Tillage operation carried out after sowing but before emergence of crop is called as — a. Minimum tillage b. Blind tillage c. Zero tillage d. None of these

Description : Tillage operation carried out after sowing but before emergence of crop is called as — a. Minimum tillage b. Blind tillage c. Zero tillage d. None of these

Last Answer : b. Blind tillage

The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Description : The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Last Answer : sowing seeds

The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Description : The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Last Answer : c) machine cycle

The classification of the scheme of Black Board Operation can be carried out under Options: A) Philosophical research B) Experimental researches C) Action researches D) None of the above

Description : The classification of the scheme of Black Board Operation can be carried out under Options: A) Philosophical research B) Experimental researches C) Action researches D) None of the above

Last Answer : C) Action researches

Arithmetic operation are carried by such micro operation on stored numeric data available in a. Register b. Data c. Both d. None

Description : Arithmetic operation are carried by such micro operation on stored numeric data available in a. Register b. Data c. Both d. None

Last Answer : a. Register

In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

Which of the following station is least efficient........ A.Nuclear power plant B.Diesel power station C.Thermal power station D.None of the above

Description : Which of the following station is least efficient........ A.Nuclear power plant B.Diesel power station C.Thermal power station D.None of the above

Last Answer : Ans: C

Which of the following power plant have longest physical life? a) Thermal power plant b) Nuclear power plant c) Hydroelectric power plant d) Diesel power plant

Description : Which of the following power plant have longest physical life? a) Thermal power plant b) Nuclear power plant c) Hydroelectric power plant d) Diesel power plant

Last Answer : Ans: C

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Description : Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Last Answer : Ans: C

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

What are different types of circuit breakers employed in thermal power plant?

Description : What are different types of circuit breakers employed in thermal power plant?

Last Answer : Answer: For low voltage operation 415/220V vacuum circuit breakers or air break circuit breakers are employed. For voltage ratings about 6.6kV and beyond SF6 circuit breakers are employed.

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : Answer: MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

What are the different Generator Protections employed in Thermal Power Plants?

Description : What are the different Generator Protections employed in Thermal Power Plants?

Last Answer : Answer: Faults in the windings, Over load protection, Over heating of windings or bearings, Over speed protection, Loss of Excitation protection, Motoring operation protection, Inadvertent ... , out of step operation protection, sub-synchronous oscillations protection and earth fault protection

What are the major electric systems in Thermal Power Plant?

Description : What are the major electric systems in Thermal Power Plant?

Last Answer : Answer: Major electrical equipment in thermal power plant are • Turbine Generator • Exciter System • Generator Protection System • Generator Transformer • HT/LT switch gear • Electrical Switch-yard

What is the largest pump in the thermal power plant?

Description : What is the largest pump in the thermal power plant?

Last Answer : Answer: In thermal power plant Boiler Feed Pump (BFP) is the largest pump, it delivers the water to the boiler.

What are different types of Steam boilers used in Thermal Power Plants?

Description : What are different types of Steam boilers used in Thermal Power Plants?

Last Answer : Answer: Different type of boiler used in thermal power plants are: • Fire tube boiler • Water tube boiler • Natural Circulation boiler • Forced Circulation boiler • Once through boiler

What are different types of circuit breakers employed in thermal power plant?

Description : What are different types of circuit breakers employed in thermal power plant?

Last Answer : For low voltage operation 415/220V vacuum circuit breakers or air break circuit breakers are employed. For voltage ratings about 6.6kV and beyond SF6 circuit breakers are employed.

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

What are the different Generator Protections employed in Thermal Power Plants?

Description : What are the different Generator Protections employed in Thermal Power Plants?

Last Answer : Faults in the windings, Over load protection, Over heating of windings or bearings, Over speed protection, Loss of Excitation protection, Motoring operation protection, Inadvertent energisation ... , out of step operation protection, sub-synchronous oscillations protection and earth fault protection

What are the major electric systems in Thermal Power Plant?

Description : What are the major electric systems in Thermal Power Plant?

Last Answer : Major electrical equipment in thermal power plant are Turbine Generator Exciter System Generator Protection System Generator Transformer HT/LT switch gear Electrical Switch-yard

Why the Thermal efficiency of the steam power plant is quite low?

Description : Why the Thermal efficiency of the steam power plant is quite low?

Last Answer : In Steam power station, more than 50% of the total heat of combustion is lost as heat rejected to the condenser and the loss is unavoidable as the heat energy cannot be converted in to mechanical ... lowest temperature. This is the reason that the thermal efficiency of the power plant is quite low.

What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Description : What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Last Answer : Overall efficiency of the system is defined as the ratio of heat equivalent of electrical output to the heat of combustion. Generally Overall efficiency of the steam plant will always be ... by multiplying the thermal efficiency of the plant with efficiency of the generator (electrical efficiency)

What is the Thermal efficiency of steam power plant?

Description : What is the Thermal efficiency of steam power plant?

Last Answer : Thermal efficiency of steam power plant is defined as the ratio of heat equivalent of mechanical energy transmitted to the turbine shaft to the heat of combustion. Generally Thermal efficiency of the steam power plant will be in the range of 30-35%

What are the main circuits in the Thermal Power Plant?

Description : What are the main circuits in the Thermal Power Plant?

Last Answer : Thermal Power plant consists of four main circuits, they are: Feed water and steam flow circuit Coal and ash circuit Air and gas circuit Cooling water circuit

Why Thermal Power Plants are always situated by the side of rivers or lakes?

Description : Why Thermal Power Plants are always situated by the side of rivers or lakes?

Last Answer : Thermal Power Plants are situated close to the rivers or lakes because to meet the large quantity of the water requirement. Water is required in the steam power plants steam in the boiler for cooling purposes such as in condensers as carrying medium such as in disposal of ash for drinking purpose