Operation carried out in Thermal power station?

Operation carried out in Thermal power station?
by

1 Answer

Answer :

The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine; the turbine which is coupled with the generator generates the electricity
by

Related questions

What are the operation carried out in Thermal power station?

Description : What are the operation carried out in Thermal power station?

Last Answer : A: The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine, the turbine which is coupled with the generator generates the electricity

Operation Carried Out In Thermal Power Stations?

Description : Operation Carried Out In Thermal Power Stations?

Last Answer : The water is obtained in the boiler and the coal is burnt so that steam is obtained this steam is allowed to hit the turbine , the turbine which is coupled with the generator generates the electricity.

Describe the operation carried out in Thermal power stations?

Description : Describe the operation carried out in Thermal power stations?

Last Answer : A:The water is boiled in the boiler with the help of coal. This generates steam. This steam is allowed to hit the turbine hence the turbine rotates. The turbine is coupled with generator. So the mechanical energy of turbine is converted to electrical energy by Generator.

Which of the following station is least efficient........ A.Nuclear power plant B.Diesel power station C.Thermal power station D.None of the above

Description : Which of the following station is least efficient........ A.Nuclear power plant B.Diesel power station C.Thermal power station D.None of the above

Last Answer : Ans: C

Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. Secure and tag the supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Description : Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. ... supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Last Answer : Answer: C

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

What are the problems in station operation due to grid under frequency?

Description : What are the problems in station operation due to grid under frequency?

Last Answer : a) Turbine having under frequency limitation, house load happen if < 48 Hz b) Due to under frequency PHT flow reduces, therefore reactor power reduces, generator power reduces c) If frequency is ... Hz DG cannot be synchronised to grid, therefore DG kept on isolation running d) GT overfluxing. 

What are the problems in station operation due to grid under voltage?

Description : What are the problems in station operation due to grid under voltage?

Last Answer : a) All the HT motors overloaded. b) VAR load increases on generator leads to heating up of rotor c) Stator current increases for same power export leads to stator over heating.

Locate and label the following items on the same map with appropriate symbols. (i) Thermal Power Station - Tuticorin (ii) Cotton Textile Centre - Surat (iii) Major Port - Kandla -SST 10th

Description : Locate and label the following items on the same map with appropriate symbols. (i) Thermal Power Station - Tuticorin (ii) Cotton Textile Centre - Surat (iii) Major Port - Kandla -SST 10th

Last Answer : Outline map of India

Which of the following pairs are correctly matched? 1. Idukki Thermal power station 2. Sabarigiri Hydroelectric project 3. Ghatprabha Irrigation project 4. Ramganga Multipurpose project Select the correct answer by using the codes given below: Codes: (a) 2, 3 and 4 (b) 1, 2, 3 and 4 (c) 3 and 4 (d) 1 and 2

Description : Which of the following pairs are correctly matched? 1. Idukki Thermal power station 2. Sabarigiri Hydroelectric project 3. Ghatprabha Irrigation project 4. Ramganga Multipurpose project Select the correct answer by using the codes given below: Codes ... 4 (b) 1, 2, 3 and 4 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans: (a)

The Talcher Thermal Power Station is in (a) Odisha (b) Maharashtra (c) West Bengal (d) Meghalaya

Description : The Talcher Thermal Power Station is in (a) Odisha (b) Maharashtra (c) West Bengal (d) Meghalaya

Last Answer : Ans: (a)

The Satpura Thermal Power Station is in (a) Uttar Pradesh (b) Jammu and Kashmir (c) Madhya Pradesh (d) Maharashtra

Description : The Satpura Thermal Power Station is in (a) Uttar Pradesh (b) Jammu and Kashmir (c) Madhya Pradesh (d) Maharashtra

Last Answer : Ans: (c)

The major thermal power station fed on natural gas is at (a) Lunej (b) Trombay (c) Naharkatiya (d) Digboi

Description : The major thermal power station fed on natural gas is at (a) Lunej (b) Trombay (c) Naharkatiya (d) Digboi

Last Answer : Ans: (c)

The 'Pacific ring of fire ' is associated with : (1) oil well fires (2) thermal power station (3) volcanoes and earthquakes (4) forest fires

Description : The 'Pacific ring of fire ' is associated with : (1) oil well fires (2) thermal power station (3) volcanoes and earthquakes (4) forest fires

Last Answer : (3) volcanoes and earthquakes Explanation: Pacific ring of fire is an area where a large number of earthquakes and voicanic eruptions occur in the basin of the Pacific ocean.

The 'Pacific Ring of Fire' is associated with – (1) oil well fires (2) thermal power station (3) volcanoes and earthquakes (4) forest fires

Description : The 'Pacific Ring of Fire' is associated with – (1) oil well fires (2) thermal power station (3) volcanoes and earthquakes (4) forest fires

Last Answer : (3) volcanoes and earthquakes Explanation: The Pacific Ring of Fire is an area where a large number of earthquakes and volcanic eruptions occur in the basin of the Pacific Ocean. In a 40,000 km ... of the world's earthquakes and 81% of the world's largest earthquakes occur along the Ring of Fire.

Major gaseous pollutant of the thermal power station is – (1) H2S (2) NH3 (3) NO2 (4) SO2

Description : Major gaseous pollutant of the thermal power station is – (1) H2S (2) NH3 (3) NO2 (4) SO2

Last Answer : (4) SO2 Explanation: A flue-gas stack is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air ... CO2) and water vapor as well as nitrogen and excess oxygen remaining from the intake combustion air.

Major gaseous pollutant of the thermal power station is (1) H2 S (2) NH3 (3) NO2 (4) SO2

Description : Major gaseous pollutant of the thermal power station is (1) H2 S (2) NH3 (3) NO2 (4) SO2

Last Answer : SO2

The ‘Pacific Ring of Fire’ is associated with (1) oil well fires (2) thermal power station (3) volcanoes and earthquakes (4) forest fires

Description : The ‘Pacific Ring of Fire’ is associated with (1) oil well fires (2) thermal power station (3) volcanoes and earthquakes (4) forest fires

Last Answer : volcanoes and earthquakes

List any two Thermal Power Station in Maharashtra with their installed capacity.

Description : List any two Thermal Power Station in Maharashtra with their installed capacity. 

Last Answer :  Thermal Power Station in Maharashtra with their installed capacity :

Classify condensers used in thermal power station. Explain each type in brief.

Description : Classify condensers used in thermal power station. Explain each type in brief. 

Last Answer : Types of condenser: Classification: 1. Jet Condenser (Mixing Type) 2. Surface condenser (non Mixing type)  Explanation:-   1. Jet Condenser (Mixing Type) In Jet condenser the steam ... there in no direct contact between the steam and cooling water. This condensate is reused in boiler. 

"Efficiency of thermal power station is low". — Justify.

Description : "Efficiency of thermal power station is low". — Justify. 

Last Answer : Justification: Efficiency of thermal power station is low":- Overall efficiency of T.P.P depends upon efficiency of boiler, turbine and alternator. The heat produced due to combustion of coal ... losses in thermal power plant is 71%, So efficiency of thermal power plant is less about 29% 

State the function of cooling tower and condenser in thermal power station.

Description : State the function of cooling tower and condenser in thermal power station.

Last Answer : 1. Condenser:   Function of condenser is to convert exhaust steam again into water by reducing its temperature with the help of cold water. Also it reduces back pressure of steam turbine 2 ... tower : The function of cooling tower is to reduce the temperature of water coming from condenser.

State any four factors governing Selection of site for thermal power station.

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

Overall thermal efficiency of a steam power station in India is in the range:

Description :  Overall thermal efficiency of a steam power station in India is in the range: A) 18-24 percent B) 30-40 percent C) 44-62 percent D) 68-79 percent

Last Answer :  Overall thermal efficiency of a steam power station in India is in the range: 30-40 percent 

What are the tests to be carried out during DC high voltage test on power cables?

Description : What are the tests to be carried out during DC high voltage test on power cables? 

Last Answer : DC high voltage testing. During DC high voltage testing flow of following currents will take place. a. Capacitance charging current. b. Dielectric absorption current. c. Surface leakage current. d. Partial discharge current (corona). e. Volumetric leakage current. 

How is thermal insulation carried out in modern construction?

Description : How is thermal insulation carried out in modern construction?

Last Answer : The rise in the cost of utilities and heat energy makes today more and more often think about ways to protect buildings from heat loss. And this is no coincidence, because in this way you can ... , glue insulation, reinforce the surface. But the final finishing should still be done in warm weather.

In a power plant, coal is carried from storage place to boilers generally by means of (A) bucket (B) V-belts (C) trolleys (D) manually.

Description : In a power plant, coal is carried from storage place to boilers generally by means of (A) bucket (B) V-belts (C) trolleys (D) manually.

Last Answer : Ans: B

The size of a conductor used in power cables depends on the (A) operating voltage. (B) power factor. (C) current to be carried. (D) type of insulation used.

Description : The size of a conductor used in power cables depends on the (A) operating voltage. (B) power factor. (C) current to be carried. (D) type of insulation used.

Last Answer : (C) current to be carried.

Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Description : Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Last Answer : (A) Constant rate

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

In erect groundnut variety drum rolling operation is carried out at — DAS. a. 30 to 45 b. 45 to 55 c. 55 to 60 d. After 60

Description : In erect groundnut variety drum rolling operation is carried out at — DAS. a. 30 to 45 b. 45 to 55 c. 55 to 60 d. After 60

Last Answer : c. 55 to 60

Tillage operation carried out after sowing but before emergence of crop is called as — a. Minimum tillage b. Blind tillage c. Zero tillage d. None of these

Description : Tillage operation carried out after sowing but before emergence of crop is called as — a. Minimum tillage b. Blind tillage c. Zero tillage d. None of these

Last Answer : b. Blind tillage

The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Description : The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Last Answer : sowing seeds

The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Description : The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Last Answer : c) machine cycle

The classification of the scheme of Black Board Operation can be carried out under Options: A) Philosophical research B) Experimental researches C) Action researches D) None of the above

Description : The classification of the scheme of Black Board Operation can be carried out under Options: A) Philosophical research B) Experimental researches C) Action researches D) None of the above

Last Answer : C) Action researches

Arithmetic operation are carried by such micro operation on stored numeric data available in a. Register b. Data c. Both d. None

Description : Arithmetic operation are carried by such micro operation on stored numeric data available in a. Register b. Data c. Both d. None

Last Answer : a. Register

In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

List the factors to be considered while choosing a site for steam power station:

Description : List the factors to be considered while choosing a site for steam power station:

Last Answer : 1.Supply of fuel 2.Availability of water 3.Transportation facilities 4.Cost and type of land 5.Nearness to load centres 6.Distance from populated area

Why battery room should be located separately in a power station?

Description : Why battery room should be located separately in a power station? 

Last Answer : Possibility of battery explosion Corrosive atmosphere by acid spray. Fire hazard. 

The overall efficiency of thermal station is

Description : The overall efficiency of thermal station is (1) 40% (2) Less than 40% (3) More than 40% (4) 50%  

Last Answer : Less than 40%

Which of the following power plant have longest physical life? a) Thermal power plant b) Nuclear power plant c) Hydroelectric power plant d) Diesel power plant

Description : Which of the following power plant have longest physical life? a) Thermal power plant b) Nuclear power plant c) Hydroelectric power plant d) Diesel power plant

Last Answer : Ans: C

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Description : Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Last Answer : Ans: C

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

What are different types of circuit breakers employed in thermal power plant?

Description : What are different types of circuit breakers employed in thermal power plant?

Last Answer : Answer: For low voltage operation 415/220V vacuum circuit breakers or air break circuit breakers are employed. For voltage ratings about 6.6kV and beyond SF6 circuit breakers are employed.

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : Answer: MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

What are the different Generator Protections employed in Thermal Power Plants?

Description : What are the different Generator Protections employed in Thermal Power Plants?

Last Answer : Answer: Faults in the windings, Over load protection, Over heating of windings or bearings, Over speed protection, Loss of Excitation protection, Motoring operation protection, Inadvertent ... , out of step operation protection, sub-synchronous oscillations protection and earth fault protection

What are the major electric systems in Thermal Power Plant?

Description : What are the major electric systems in Thermal Power Plant?

Last Answer : Answer: Major electrical equipment in thermal power plant are • Turbine Generator • Exciter System • Generator Protection System • Generator Transformer • HT/LT switch gear • Electrical Switch-yard