Why rate of condensation is higher on a polished surface compared to rusty surface ?

Why rate of condensation is higher on a polished surface compared to rusty surface ?
by

1 Answer

Answer :

Polished surface promotes drop wise condensation and does not wet the surface.
by

Related questions

The most conducive surface for dropwise condensation to occur is the __________ surface. (A) Coated (B) Oily (C) Glazed & polished (D) Smooth

Description : The most conducive surface for dropwise condensation to occur is the __________ surface. (A) Coated (B) Oily (C) Glazed & polished (D) Smooth

Last Answer : (B) Oily

Dropwise condensation occurs on __________ surfaces. (A) Clean and dirt free (B) Smooth clean (C) Contaminated cooling (D) Polished

Description : Dropwise condensation occurs on __________ surfaces. (A) Clean and dirt free (B) Smooth clean (C) Contaminated cooling (D) Polished

Last Answer : (C) Contaminated cooling

Which is NOT a characteristic of emissivity?  A. It is high with most nonmetals  B. It is directly proportional to temperature  C. It is independent with the surface condition of the material  D. It is low with highly polished metals

Description : Which is NOT a characteristic of emissivity?  A. It is high with most nonmetals  B. It is directly proportional to temperature  C. It is independent with the surface condition of the material  D. It is low with highly polished metals

Last Answer : It is independent with the surface condition of the material

Share is a components. a) Sharp b) Polished c) Pointed d) All of above

Description : Share is a components. a) Sharp b) Polished c) Pointed d) All of above

Last Answer : All of above

Roller chains are used for: a)Higher speed and higher loads b)made of high grade steel c)components are harden and polished d)All of the above

Description : Roller chains are used for: a)Higher speed and higher loads b)made of high grade steel c)components are harden and polished d)All of the above

Last Answer : d)All of the above

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Description : How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Last Answer : D. By application of antireflection coating

A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished

Description : A hot body will radiate heat most rapidly, if its surface is (A) White & rough (B) Black & rough (C) White & polished (D) Black & polished

Last Answer : (B) Black & rough

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Why rockets using liquid hydrogen have higher specific impulse compared to liquid hydrocarbon ?

Description : Why rockets using liquid hydrogen have higher specific impulse compared to liquid hydrocarbon ?

Last Answer : Liquid hydrogen has higher burning velocity.

The thickness of condensate layer in filmwise condensation depends on the (A) Condensation rate (B) Surface configuration (C) Liquid flow rate from the surface (D) All (A), (B) and (C)

Description : The thickness of condensate layer in filmwise condensation depends on the (A) Condensation rate (B) Surface configuration (C) Liquid flow rate from the surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film wise condensation (C) If a condensing liquid does not wet the surface dropwise, even then condensation will take place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Description : Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film ... place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Last Answer : (B) Suitable coating or vapour additive is used to promote film wise condensation

In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Last Answer : (C) The monomers contain two functional groups

In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Description : In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Last Answer : 100C

Techniques of waste heat recovery ....... a) Direct contact condensation b) Indirect contact condensation c) Transport membrane condensation d) All of the above

Description : Techniques of waste heat recovery ....... a) Direct contact condensation b) Indirect contact condensation c) Transport membrane condensation d) All of the above

Last Answer : All of the above

The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Description : The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Last Answer : Sublimation

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as  a. sublimation  b. condensation  c. deposition  d. regelation

Description : The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as  a. sublimation  b. condensation  c. deposition  d. regelation

Last Answer : regelation

What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Last Answer : Sublimation

What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Description : What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Last Answer : Latent heat

What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of vaporation

What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of fusion

In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Description : In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Last Answer : (A) Gives a higher shell side pressure drop

Stood on rusty thumb tack - would you get a tetanus injection?

Description : Stood on rusty thumb tack - would you get a tetanus injection?

Last Answer : If it has been more than 4–5 years since you had a tetanus shot, then – yes, you should. Why take the risk of tetanus?

What's your tried and true method of reviving a rusty cast-iron pan?

Description : What's your tried and true method of reviving a rusty cast-iron pan?

Last Answer : CLR and steel wool and hot water. I haven’t owned used a cast iron pan in 22 years.

After scraping my leg across something rusty and drawing blood, how long can I wait to get a tetanus shot?

Description : After scraping my leg across something rusty and drawing blood, how long can I wait to get a tetanus shot?

Last Answer : answer:As soon as possible. The booster may not prevent a potentially fatal case of tetanus from the current wound, however, as it can take up to two weeks for tetanus antibodies to form ... instead. All tetanus victims should be vaccinated against the disease or offered a booster shot. Wikipedia

My neighbors have left their rusty van parked in front of my home since last year. Is this illegal?

Description : My neighbors have left their rusty van parked in front of my home since last year. Is this illegal?

Last Answer : Are they blocking your driveway? If not, then I don’t think it’s illegal.

How can I save my rusty wok?

Description : How can I save my rusty wok?

Last Answer : Bamboo wok brush , i would say would be the best bet .. Failing that wirewool real fine grade say 0000 gauge .

I like to collect vintage kitchen gadgets and recently found a pair of old metal graters. They are rusty and somewhat tarnished. Does any one know how to clean these without damaging the finish or scratching them?

Description : I like to collect vintage kitchen gadgets and recently found a pair of old metal graters. They are rusty and somewhat tarnished. Does any one know how to clean these without damaging the finish or scratching them?

Last Answer : Immerse them in CLR for maybe 10 minutes and then brush off with a washcloth or soft toothbrush. Good luck!

what makes my rose blooms turn a rusty color and not fill out?

Description : what makes my rose blooms turn a rusty color and not fill out?

Last Answer : It could be mites or fungus use a rose spray, cut off the effected buds..........ph should be 6.0-8.0 and give it a little old dry horsemanure. side dress it in a wide ring.

can string beans be frozen if they turn rusty

Description : can string beans be frozen if they turn rusty

Last Answer : I would not eat or freeze them................sounds like spider mites or another bleight.......pick them off and spray the plant with 1 teasp non-alcohol liquid soap & 1 qt of water and spray...........use a stick and spray under the leaves.....spray again after a rain.

My rhubarb leaves look like they're being eaten by bugs-they're holey and rusty looking--what can I do?

Description : My rhubarb leaves look like they're being eaten by bugs-they're holey and rusty looking--what can I do?

Last Answer : after the sun goes down mix 1 teasp liquid soap & 1 qt water spray and again after a rain.

why do my buttercups look rusty after blooming?

Description : why do my buttercups look rusty after blooming?

Last Answer : Need Answer

our northern red oak tree has rusty spots and all the leaves are curling up

Description : our northern red oak tree has rusty spots and all the leaves are curling up

Last Answer : Need Answer

what makes the leaves get rusty and turn bad?

Description : what makes the leaves get rusty and turn bad?

Last Answer : Need Answer

Rusty tap water

Description : Hello, rusty water has been flowing in the water tap in Pilsen since morning. Does it matter that I drank about 2 glasses of juice? I didn't notice it until I washed my hands. Wood chips

Last Answer : One drink won't hurt you. At worst, you run to the bathroom but nothing else.

Repair of the rusty side of the car

Description : What to do if there is a rusty stain on the car door ?

Last Answer : Sand, degrease, then apply sealant, sand and recoat after drying.

Rusty water comes out of the boiler

Description : I moved into an apartment that was empty for half a year and rusty water flows from the boiler. I tried to forgive it, but it still is. Is there anything you can do about it?

Last Answer : Yes .... you have to wait for that rusty water can flow calmly for a week ... but it doesn't clear it. I took the experience with it ... I waited and I got it ... ☢ ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

Rusty tap water

Description : Probably somewhere repairing the water supply flows completely orange water. Does it bother me when I drank her glass?

Last Answer : You will definitely survive in good health. But I wouldn't drink it all the time

Can I add rusty iron to the concrete to strengthen it?

Description : Does it matter that there is rust on the iron? When I add it to concrete? Like to strengthen?

Last Answer : I don't mind. Concrete poured will no longer rust.

How to clean rusty nails and screws.

Description : What solution is it to throw in to get the rust here? It's not extra rusty.

Last Answer : You need to consider whether the rusting is worth it at all. At present, nails and screws with a stainless steel finish are available on the market, and there is plenty of everything. Otherwise, just soak in kerosene or diesel, or use a liquid cutter.

How to repaint rusty stains on the wall

Description : I've already applied about 6 coats of primalex, but the stains always come to the surface. The gutter is already repaired, it no longer flows, but the wall cannot be repainted. What with this?

Last Answer : Penetrate (for example with this - http://www.primalex.cz/index.php?location=27), the penetration will not allow rust from the "base" to seep into other layers of the painting.

how to turn metal rusty for craft project?

Description : how to turn metal rusty for craft project?

Last Answer : Things You'll Need 2 tablespoons salt Spray bottle Instructions 1 Dissolve 2 tablespoons of salt into a pint of warm water. Then put the salt water in a spray bottle. 2 Take the ... saltwater daily until it has acquired the desired patina. http://www.ehow.com/how_8421623_turn-metal-rusty.html

What metal that goes rusty when it reacts with water?

Description : What metal that goes rusty when it reacts with water?

Last Answer : Ferrous metals such as iron will quickly go rusty by reacting with air and water.

Water pipes in hilly areas often burst on a cold frosty night, because – (1) The material of which pipes are made contracts due to cold and so breaks (2) Water in the pipes freezes and on freezing water expands, so pipes break (3) Frost makes the pipes rusty, so they break (4) None of these

Description : Water pipes in hilly areas often burst on a cold frosty night, because – (1) The material of which pipes are made contracts due to cold and so breaks (2) Water in the pipes freezes and on freezing water expands, so pipes break (3) Frost makes the pipes rusty, so they break (4) None of these

Last Answer : (2) Water in the pipes freezes and on freezing water expands, so pipes break Explanation: The temperature may fall below 0° C during cold frosty nights which converts the water inside the pipes into ice, ... in an increase in volume. This exerts great force on the pipes and as a result, they burst.

Water pipes in hilly areas often burst on a cold frosty night, because (1) the material of which pipes are made contracts due to cold and so breaks (2) water in the pipes freezes and on freezing water expands, so pipes break (3) frost makes the pipes rusty, so they break (4) None of these

Description : Water pipes in hilly areas often burst on a cold frosty night, because (1) the material of which pipes are made contracts due to cold and so breaks (2) water in the pipes freezes and on freezing water expands, so pipes break (3) frost makes the pipes rusty, so they break (4) None of these

Last Answer : water in the pipes freezes and on freezing water expands, so pipes break

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity