What is the principle of mechanical refrigeration ?

What is the principle of mechanical refrigeration ?
by

1 Answer

Answer :

Axis. A volatile liquid will boil under the proper conditions and in so doing will absorb heat from surrounding objects.
by

Related questions

The statement that the sum of the kinetic and potential energies of a particle in the earth's gravitational field is constant is known as a.Principle of conservation of mechanical energy b.Law of gravitation c.Newton's law d.Principle of conservation of momentum e.Law of nature

Description : The statement that the sum of the kinetic and potential energies of a particle in the earth's gravitational field is constant is known as a.Principle of conservation of mechanical energy b.Law of gravitation c.Newton's law d.Principle of conservation of momentum e.Law of nature

Last Answer : a. Principle of conservation of mechanical energy

What is the use of flash chamber in a vapour compression refrigeration cycle to improve the COP of refrigeration cycle ?

Description : What is the use of flash chamber in a vapour compression refrigeration cycle to improve the COP of refrigeration cycle ?

Last Answer : When liquid refrigerant as obtained from condenser is throttled, there are some vapours. These vapours if carried through the evaporator will not contribute to refrigerating effect. Using a flash ... out in stages. Similarly compression process is also done in two separate compressor stages.

What Is The Use Of Compressor In Refrigeration?

Description : What Is The Use Of Compressor In Refrigeration?

Last Answer : The compressor does exactly as its name says: it compresses the refrigerant. The compressor receives low pressure gas from the evaporator and converts it to high pressure gas. As mentioned earlier, as the gas is compressed, the temperature rises. The hot refrigerant gas then flows to the condenser.

What Is Auto Refrigeration?

Description : What Is Auto Refrigeration?

Last Answer : Auto-refrigeration is a process where an unintentional and/or uncontrolled phase change of a hydrocarbon from a liquid state to a vapor occurs, resulting in a very rapid chilling (refrigeration) of the liquid containing local equipment and/or piping.

Why Is A Compressor Used In Refrigeration?

Description : Why Is A Compressor Used In Refrigeration?

Last Answer : The compressor does exactly as its name says: it compresses the refrigerant. The compressor receives low pressure gas from the evaporator and converts it to high pressure gas. As mentioned earlier, as the gas is compressed, the temperature rises. The hot refrigerant gas then flows to the condenser.

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Last Answer : kW/Ton of Refrigeration

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Last Answer : kW/Ton of Refrigeration

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

(2) Exclusion Principle of Pauli Explanation: The Pauli exclusion principle is the quantum mechanical principle that no two identical fermions (particles with half-integer spin) may occupy the same quantum state simultaneously. A more rigorous statement is that the total wave function for two identical fermions is anti-symmetric with respect to exchange of the particles.

Description : (2) Exclusion Principle of Pauli Explanation: The Pauli exclusion principle is the quantum mechanical principle that no two identical fermions (particles with half-integer spin) may occupy the same ... function for two identical fermions is anti-symmetric with respect to exchange of the particles.

Last Answer : The three elements most needed in common fertilizers are – (1) Sulphur, Phosphorous and Sodium (2) Nitrogen, Phosphorous and Sodium (3) Phosphorous, Sodium and Nitrogen (4) Calcium, Phosphorous and Potassium

Generators convert mechanical motion to electrical energy using what principle?

Description : Generators convert mechanical motion to electrical energy using what principle?

Last Answer : Magnetic induction

(i) Describe the principle of mechanical governor in fuel injection pump. (ii) State four types of injector nozzles

Description : (i) Describe the principle of mechanical governor in fuel injection pump. (ii) State four types of injector nozzles

Last Answer : (i) Working Principal of mechanical governor of FIP: The working principle of mechanical governor is illustrated in figure. When the engine speed tends to exceed the limit the weights fly apart. This causes ... ) Multi-hole nozzle 3) Long stem nozzle 4) Pintle nozzles 5) Pintuax nozzles 

____ grippers are used to transfer ferrous material a.Magnetic grippers b.Mechanical grippers c.Adhesive grippers d.Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material a.Magnetic grippers b.Mechanical grippers c.Adhesive grippers d.Vacuum cup grippers

Last Answer : a.Magnetic grippers

____ grippers are used to pick up light weight materials such as paper,cloth etc a.Mechanical grippers b.Adhesive grippers c.Vacuum cup grippers d.Magnetic grippers

Description : ____ grippers are used to pick up light weight materials such as paper,cloth etc a.Mechanical grippers b.Adhesive grippers c.Vacuum cup grippers d.Magnetic grippers

Last Answer : b.Adhesive grippers

____ is a collection of mechanical linkage connected by joints a.End effector b.Gripper c.Sensor d.Manipulator

Description : ____ is a collection of mechanical linkage connected by joints a.End effector b.Gripper c.Sensor d.Manipulator

Last Answer : d.Manipulator

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned

Description : The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned

Last Answer : b.mechanical errors

The law of conservation of mechanical energy is valid a.Irrespective of the nature of force field b.Only in gravitational field c.Only if the total work done by the particle in moving around in a closed trajectory is zero d.Only if the force is tangential to the trajectory e.None of the above

Description : The law of conservation of mechanical energy is valid a.Irrespective of the nature of force field b.Only in gravitational field c.Only if the total work done by the particle in moving around in a closed trajectory is zero d.Only if the force is tangential to the trajectory e.None of the above

Last Answer : c. Only if the total work done by the particle in moving around in a closed trajectory is zero

A wound watch spring possesses energy in the form of a.Mechanical potential energy b.Kinetic energy c.Spring energy d.Potential energy e.Both potential and kinetic energy

Description : A wound watch spring possesses energy in the form of a.Mechanical potential energy b.Kinetic energy c.Spring energy d.Potential energy e.Both potential and kinetic energy

Last Answer : a. Mechanical potential energy

In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Description : In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Last Answer : c. Mechanical advantage is less than velocity ratio

Give one example each of the following proportion of materials dimensional, physical, technological and mechanical.

Description : Give one example each of the following proportion of materials dimensional, physical, technological and mechanical.

Last Answer : Roughness, enthalpy, toughness, and hardness respectively.

What is Mechanical Engineering?

Description : What is Mechanical Engineering?

Last Answer : Mechanical Engineering is the branch of engineering which deals with the designing, constructing , maintaining and manufacturing various mechanical systems.

Which of the following farming is a replacement of human and animal power by mechanical power for different farm operation? 1. Mechanized farming 2. Mixed farming 3. Both of these 4. none of these

Description : Which of the following farming is a replacement of human and animal power by mechanical power for different farm operation? 1. Mechanized farming 2. Mixed farming 3. Both of these 4. none of these

Last Answer : ans 1

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

In 2000-2001 the use of mechanical & electrical increased from a)20% to 45%. c) 45% to 75% b) 45 to below 83% d)40% to over 83 %

Description : In 2000-2001 the use of mechanical & electrical increased from a)20% to 45%. c) 45% to 75% b) 45 to below 83% d)40% to over 83 %

Last Answer : 40% to over 83 %

It is a… of soil to provide favorable condition for crop production. a. Chemical manipulation. c) Mechanical & chemical manipulation b. Mechanical manipulation d) none of the above

Description : It is a… of soil to provide favorable condition for crop production. a. Chemical manipulation. c) Mechanical & chemical manipulation b. Mechanical manipulation d) none of the above

Last Answer : Mechanical manipulation

is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough

Description : is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough

Last Answer : Tillage 

Mechanical harvest of fruits and vegetables are difficult because A. Different characteristics. C. Machinery B. Operator D. All of the above

Description : Mechanical harvest of fruits and vegetables are difficult because A. Different characteristics. C. Machinery B. Operator D. All of the above

Last Answer : Different characteristics

farming is a replacement of human and animal power by mechanical power for different farm operation: a) Mechanized farming c) Mixed farming b) Both of these b) None of these

Description : farming is a replacement of human and animal power by mechanical power for different farm operation: a) Mechanized farming c) Mixed farming b) Both of these b) None of these

Last Answer : Mechanized farming

Mechanical and Electrical sources increased from - A) 40 to 83 % C) 30 to 93 % B) 35 to 87 % D) None of the above

Description : Mechanical and Electrical sources increased from - A) 40 to 83 % C) 30 to 93 % B) 35 to 87 % D) None of the above

Last Answer : 40 to 83 %

Indian agriculture is undergoing a graduals shift from dependence on human power and animal power to......... a) mechanical power b) solar power c) thermal power d) all of the above

Description : Indian agriculture is undergoing a graduals shift from dependence on human power and animal power to......... a) mechanical power b) solar power c) thermal power d) all of the above

Last Answer : mechanical power

How is air produced in mechanical draught cooling tower? a) Air Tuyeres b) Propeller fans c) Air blowers d) Louvre

Description : How is air produced in mechanical draught cooling tower? a) Air Tuyeres b) Propeller fans c) Air blowers d) Louvre

Last Answer : Propeller fans

In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Description : In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Last Answer : Atmospheric cooling tower

In which system is Cooling of hot water is done on tray as step by? a. Mechanical draught cooling system b. Hyperbolic cooling tower c. Atmospheric cooling tower d. Wet cooling tower

Description : In which system is Cooling of hot water is done on tray as step by? a. Mechanical draught cooling system b. Hyperbolic cooling tower c. Atmospheric cooling tower d. Wet cooling tower

Last Answer : Atmospheric cooling tower

. In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Description : . In which system is Cooling of hot water is done on tray as step by? a) Mechanical draught cooling system b) Hyperbolic cooling tower c) Atmospheric cooling tower d) Wet cooling tower

Last Answer : Atmospheric cooling tower

The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Description : The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Last Answer : joule

Study of transformation of heat energy to mechanical energy to other forms of energy.  a. Thermodynamics  b. Physics  c. Mechanics  d. None of the above

Description : Study of transformation of heat energy to mechanical energy to other forms of energy.  a. Thermodynamics  b. Physics  c. Mechanics  d. None of the above

Last Answer : Thermodynamics

Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839,000 joules  d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839, ... d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 419 000 joules

How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 62850 joules

What is a form of mechanical work which is related with the expansion and compression of substances?  A. Boundary work  B. Thermodynamic work  C. Phase work  D. System work

Description : What is a form of mechanical work which is related with the expansion and compression of substances?  A. Boundary work  B. Thermodynamic work  C. Phase work  D. System work

Last Answer : Boundary work

A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Description : A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Last Answer : Thermal, phase, mechanical and chemical

Without electrical, mechanical, gravitational, surface tension and motion effects, a system is called _____ system.  A. Simple  B. Simple compressible  C. Compressible  D. Independent

Description : Without electrical, mechanical, gravitational, surface tension and motion effects, a system is called _____ system.  A. Simple  B. Simple compressible  C. Compressible  D. Independent

Last Answer : Simple compressible

A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Chemical

If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Phase

A system is in ______ equilibrium if the temperature is the same throughout the entire system.  A. Static  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium if the temperature is the same throughout the entire system.  A. Static  B. Thermal  C. Mechanical  D. Phase

Last Answer : Thermal

An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Description : An adiabatic process is one in which  A.no heat enters or leaves the gas  B.the temperature of the gas changes  C.the change in internal energy is equal to the mechanical workdone  D.all of the above

Last Answer : Answer: D

Isochoric process is one in which  (a) free expansion takes place  (b) very little mechanical work is done by the system  (c) no mechanical work is done by the system  (d) all parameters remain constant

Description : Isochoric process is one in which  (a) free expansion takes place  (b) very little mechanical work is done by the system  (c) no mechanical work is done by the system  (d) all parameters remain constant

Last Answer : Answer : c