Indian agriculture is undergoing a graduals shift from dependence on human power and animal power to......... a) mechanical power b) solar power c) thermal power d) all of the above

Indian agriculture is undergoing a graduals shift from dependence on human power and animal power to......... a) mechanical power b) solar power c) thermal power d) all of the above
by

1 Answer

Answer :

mechanical power

by

Related questions

Which of the following farming is a replacement of human and animal power by mechanical power for different farm operation? 1. Mechanized farming 2. Mixed farming 3. Both of these 4. none of these

Description : Which of the following farming is a replacement of human and animal power by mechanical power for different farm operation? 1. Mechanized farming 2. Mixed farming 3. Both of these 4. none of these

Last Answer : ans 1

farming is a replacement of human and animal power by mechanical power for different farm operation: a) Mechanized farming c) Mixed farming b) Both of these b) None of these

Description : farming is a replacement of human and animal power by mechanical power for different farm operation: a) Mechanized farming c) Mixed farming b) Both of these b) None of these

Last Answer : Mechanized farming

In general, chest drainage tubes are not used for the patient undergoing a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty hemithorax prevents mediastinal shift. b) Lobectomy With lobectomy, two chest tubes are usually inserted for drainage, the upper for air and the lower for fluid c) Wedge resection With wedge resection, the pleural cavity usually is drained because of the possibility of an air or blood leak d) Segmentectomy With segmentectomy, drains are usually used because of the possibility of an air or blood leak.

Description : In general, chest drainage tubes are not used for the patient undergoing a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty ... With segmentectomy, drains are usually used because of the possibility of an air or blood leak.

Last Answer : a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty hemithorax prevents mediastinal shift.

What is the dependence of mechanical force per unit area of charged conductor on the surface charge density and the dielectric constant of the medium

Description : What is the dependence of mechanical force per unit area of charged conductor on the surface charge density and the dielectric constant of the medium

Last Answer : What is the dependence of mechanical force per unit area of charged conductor on the surface charge density and the dielectric constant of the medium

What is the main source of energy for most processe undergoing thermal expansion?

Description : What is the main source of energy for most processe undergoing thermal expansion?

Last Answer : Thermal energy is the main source of energy for most processeundergoing thermal expansion

What happens to a substance that is undergoing thermal expansion?

Description : What happens to a substance that is undergoing thermal expansion?

Last Answer : The dimension of the sample increases; the chemical composition remain unchanged.

A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Description : A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Last Answer : Thermal, phase, mechanical and chemical

A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Chemical

If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : If a system involves two phases, it is in ______ equilibrium when the mass of each phase reaches an equilibrium level and stays there.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Phase

A system is in ______ equilibrium if the temperature is the same throughout the entire system.  A. Static  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium if the temperature is the same throughout the entire system.  A. Static  B. Thermal  C. Mechanical  D. Phase

Last Answer : Thermal

For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Description : For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Last Answer : (A) Temperature - entropy

Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Description : Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Last Answer : isometric

The behaviour of a perfect gas, undergoing any change in the variables which control physical properties, is governed by  A. Boyle’s law  B. Charles’ law  C. Gay-Lussac law  D. all of these

Description : The behaviour of a perfect gas, undergoing any change in the variables which control physical properties, is governed by  A. Boyle’s law  B. Charles’ law  C. Gay-Lussac law  D. all of these

Last Answer : Answer: D

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

Mechanization in Indian agriculture started with…………. a) Land reclamation b) Development c) Central tractor organization d) none of the above

Description : Mechanization in Indian agriculture started with…………. a) Land reclamation b) Development c) Central tractor organization d) none of the above

Last Answer : Development 

Which of the following statements(s) is/are true concerning human energy requirement? a. In normal subjects, less than 5% of basal energy requirement is spent on cardiac output and the work of breathing b. Mechanical ventilation can decrease the energy expenditure for normal respiration c. For a 70 kg male, average resting energy consumption is almost 1500 kcal/day d. Similar increases in energy expenditures are associated with elective surgery and trauma or thermal injury

Description : Which of the following statements(s) is/are true concerning human energy requirement? a. In normal subjects, less than 5% of basal energy requirement is spent on cardiac output and the ... d. Similar increases in energy expenditures are associated with elective surgery and trauma or thermal injury

Last Answer : Answer: a, c Basal energy requirements are measured with the subject at rest when no external work is being done; the energy is used mainly for transport and synthetic work within cells. A ... average-sized adult who sustains a major burn rarely may require more than 3500 kcal/day for maintenance

Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. Administered prices Which of the above are correct? [BPSC 2011] (a) II, III and IV (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Description : Consider the following problems being faced by the Indian Coal Industry : 1. Poor quality of coal and bottlenecks in the coal movement 2. Low utilisation capacity of washeries 3. Growing dependence on the import of coking coal 4. ... (b) I, II, III and IV (c) I, III and IV (d) I, II and III

Last Answer : Ans: (b)

‘The shift from handprinting to mechanical printing led to the print revolution.’ -SST 10th

Description : ‘The shift from handprinting to mechanical printing led to the print revolution.’ -SST 10th

Last Answer : (i) In the hundred years between 1450 and 1550. the printing presses were set up in most of the countries of Europe. (ii) Printers from Germany travelled to other countries, seeking work and ... 200 million copies. (iv) It influenced popular perceptions and opened up new ways of looking at things

Explain the reasons favouring shift from hand printing to mechanical printing in China. -SST 10th

Description : Explain the reasons favouring shift from hand printing to mechanical printing in China. -SST 10th

Last Answer : The reasons favouring shift from hand printing to mechanical printing in China are: (i) Textbooks of Civil Service Examination were printed in vast numbers under the sponsorship of the imperial state. ... presses were imported in China and Shanghai became the new hub of the new print culture.

Which of the following is not a source of pollution in soil? (A) Transport sector (B) Agriculture sector (C) Thermal power plants (D) Hydropower plants

Description : Which of the following is not a source of pollution in soil? (A) Transport sector (B) Agriculture sector (C) Thermal power plants (D) Hydropower plants

Last Answer : (D) Hydropower plants 

The following is the correct order of energy conversion in thermal power plants a. Chemical energy – Mechanical energy – Electrical energy b. Mechanical energy – Chemical energy – Electrical energy c. Wind energy – Mechanical energy – Electrical energy d. Heat energy – Electrical energy – Mechanical energy.

Description : The following is the correct order of energy conversion in thermal power plants a. Chemical energy - Mechanical energy - Electrical energy b. Mechanical energy - Chemical energy - Electrical energy c ... - Mechanical energy - Electrical energy d. Heat energy - Electrical energy - Mechanical energy.

Last Answer : a. Chemical energy – Mechanical energy – Electrical energy

Which of the following statements regarding the transmission of infectious agents through blood transfusions is/are true? A. The transmission rates for human immunodeficiency virus (HIV) have been decreasing progressively since the early 1980s. B. The transmission rates of hepatitis have been decreasing steadily since the 1980s. C. Cytomegalovirus (CMV) is the infectious agent most commonly transmitted in blood. D. Severely immunocompromised patients (such as patients undergoing transplantation) should receive specially screened blood products.

Description : Which of the following statements regarding the transmission of infectious agents through blood transfusions is/are true? A. The transmission rates for human immunodeficiency virus (HIV) ... patients (such as patients undergoing transplantation) should receive specially screened blood products.

Last Answer : Answer: ABCD DISCUSSION: The incidence of both HIV and hepatitis transmitted via blood transfusions has been steadily decreasing since the 1980s. This is related to improved ... , severely compromised patients such as those undergoing transplantation should receive CMV-negative blood products

What is the importance of animal husbandry in Indian agriculture ? -Geography

Description : What is the importance of animal husbandry in Indian agriculture ? -Geography

Last Answer : Animal husbandry forms a very important part of Indian agriculture. Animal husbandry and Dairy development plays a prominent role in the rural economy in supplementing the income of rural households, particularly, the ... 40 metres where sunlight can easily penetrate. 3. E.g., cod, halibut, etc.

What is the reason behind the decrease in real dependence of human beings ?

Description : What is the reason behind the decrease in real dependence of human beings ?

Last Answer : The reason behind the decrease in the actual dependence of human beings is the invention and use of instruments.

is a self-propelled power unit having wheels for tracks for operating agriculture implements and machines including trailers. A) Car B) Tractor C) Motorcycle D) Truck

Description : is a self-propelled power unit having wheels for tracks for operating agriculture implements and machines including trailers. A) Car B) Tractor C) Motorcycle D) Truck

Last Answer : Truck

is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough

Description : is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough

Last Answer : Tillage 

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

Which of the following is not one of the non-conventional sources of energy in India? (a) Solar Energy (b) Geo-Thermal Energy (c) Thermal Energy (d) Tidal Power

Description : Which of the following is not one of the non-conventional sources of energy in India? (a) Solar Energy (b) Geo-Thermal Energy (c) Thermal Energy (d) Tidal Power

Last Answer : Ans: (c)

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

Which kind of power accounts for the largest share of power generation in India? (1) hydro-electricity (2) thermal (3) nuclear (4) solar

Description : Which kind of power accounts for the largest share of power generation in India? (1) hydro-electricity (2) thermal (3) nuclear (4) solar

Last Answer : (2) thermal Explanation: Thermal power is the largest source of power in India. There are different types of Thermal power plants based on the fuel used to generate the steam such ... and several other state level power generating companies are engaged in operating coal based Thermal Power Plants.

Discuss the problems involved in 1. Hydro power generation 2. Thermal power generation 3. Solar power generation

Description : Discuss the problems involved in 1. Hydro power generation 2. Thermal power generation 3. Solar power generation

Last Answer : 1. Hydro power generation This is traditional method of producing cheap electricity but involve some problems I. The people living in these areas where the dams to be constructed are shifted to some ... I. Very high installation cost II. Not applicable for night III. Number of batteries required

Which of the following is an unconventional source of energy? (A) Thermal power (B) Hydroelectric power (C) Nuclear-fusion power (D) Solar power

Description : Which of the following is an unconventional source of energy? (A) Thermal power (B) Hydroelectric power (C) Nuclear-fusion power (D) Solar power

Last Answer : Option D

Which of the following is an unconventional source of energy? (A) Thermal power (B) Hydroelectric power (C) Nuclear-fusion power (D) Solar power

Description : Which of the following is an unconventional source of energy? (A) Thermal power (B) Hydroelectric power (C) Nuclear-fusion power (D) Solar power

Last Answer : Option D

supercritical boiler are use of………….. A. Thermal power. B. Electric power C. Solar power. D. Steam power

Description : supercritical boiler are use of………….. A. Thermal power. B. Electric power C. Solar power. D. Steam power

Last Answer : B. Electric power

Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Last Answer : a.Turn

The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

Induced draft fans provided in large thermal power plant boilers have __________ blades. (A) Forward curved (B) Backward curved (C) Double curved (D) Radial or straight

Description : Induced draft fans provided in large thermal power plant boilers have __________ blades. (A) Forward curved (B) Backward curved (C) Double curved (D) Radial or straight

Last Answer : (B) Backward curved

Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Description : Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Last Answer : All of the above.

The hyperbolic cooling towers are associated with ……. and …….. power plants. a) electrical, thermal c) thermal, nuclear b) nuclear, electrical d) none of above

Description : The hyperbolic cooling towers are associated with ……. and …….. power plants. a) electrical, thermal c) thermal, nuclear b) nuclear, electrical d) none of above

Last Answer : thermal, nuclear

Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Description : Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Last Answer : Rankine cycle

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

What states that for any two bodies in thermal equilibrium, the ratios of emissive power to the absorptivity are equal?

Description : What states that for any two bodies in thermal equilibrium, the ratios of emissive power to the absorptivity are equal?  A. Kirchhoff’s radiation law  B. Newton’s law of cooling  C. Stefan-Boltzmann law  D. Hess’s law

Last Answer : Kirchhoff’s radiation law

What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Description : What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Last Answer : Emissive power

Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Description : Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Last Answer : Answer : c

What is Thermal Mechanical Transformation ?

Description : What is Thermal Mechanical Transformation ?

Last Answer : The conversion of rocks under the influence of both surface heat and crustal pressure is called thermal-mechanical conversion.

What are five examples that illustrate mechanical energy being converted to thermal energy?

Description : What are five examples that illustrate mechanical energy being converted to thermal energy?

Last Answer : Need answer

How are similarities between thermal energy and electrical energy mechanical energy electromagnetic?

Description : How are similarities between thermal energy and electrical energy mechanical energy electromagnetic?

Last Answer : They are both an energy

Heat engine uses ______ energy to produce mechanical work. a. Thermal b. Fluid c. Kinetic d. Electric (Ans:a)

Description : Heat engine uses ______ energy to produce mechanical work. a. Thermal b. Fluid c. Kinetic d. Electric (Ans:a)

Last Answer : Which of the following is not an internal Combustion (IC) engine? a. Gas engine b. Wankel engine c. Jet engine d. Stirling engine (Ans:d)

Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor

Description : Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor

Last Answer : Ans : d

A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Description : A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Last Answer : (3) Mechanical energy Explanation: Steam engine, machine for converting heat energy into mechanical energy using steam as a medium, or working fluid.