Define LAN. Write any two disadvantages of LAN.

Define LAN. Write any two disadvantages of LAN.
by

1 Answer

Answer :

Definition of LAN: LAN is a network which is designed to operate over a small physical area such as an office, factory or a group of buildings.

Disadvantages:

1. Power - a good LAN is required to be on all the times.

2. Security - each computer and device become another point of entry for undesirables.

3. Investment in Higher Costs due to server systems.

4. Frustration if having a problem setting up.

5. A lot of times a network shares one Internet connection - if all computers running at once, can reduce speed for each.

6. Area covered is limited.
by

Related questions

8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Compare LAN, MAN and WAN.

Description : Compare LAN, MAN and WAN.

Last Answer : BASIS OF COMPARISON LAN MAN WAN Expands to Local Area Network Metropolitan Area Network  Wide Area Network Area A network that connects a group of computers in a small ... More Congestion College, School, Hospital. Small towns, City. Country/Continent.

It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Description : It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Last Answer : i. Setup:  ii. Name of topology: Star topology iii. Advantages of Star Topology 1) As compared to Bus topology it gives far much better performance, signals don't necessarily get ... as well number of nodes which can be added in such topology is depended on capacity of central device.

Explain infrared communication. List any two disadvantages of infrared communication.

Description : Explain infrared communication. List any two disadvantages of infrared communication.

Last Answer : Infrared communication (IR) is an example of wireless communication. However, it is limited to very simple applications & suffers from several disadvantages, mainly very small bandwidth & distances ... areas require multiple emitter panels, which will increase the cost of the system.

Give any two disadvantages of unshielded twisted pair cable.

Description : Give any two disadvantages of unshielded twisted pair cable.

Last Answer : Disadvantages of unshielded twisted pair cable. 1. Highly prone to crosstalk. 2. Unable to provide secured transmission of data.

List any two disadvantages of bus topology.

Description : List any two disadvantages of bus topology. 

Last Answer : Disadvantages of bus topology. 1. Heavy network traffic slows down the bus speed .In bus topology only one computer can transmit & other have to wait till their turn comes & there ... connectors will cause reflections & bring down the whole network causing all network activity to stop.

Define protocol. Give the name of any two protocols.

Description : Define protocol. Give the name of any two protocols.

Last Answer : Define protocol: There are certain rules that must be followed to ensure proper communication & a set of such rules is known as protocol. Example: UDP, TCP/IP, SMTP, HTTP, SSL, FTP etc

Define Server. Give the name of any two types of Server.

Description : Define Server. Give the name of any two types of Server.

Last Answer : Definition of server: The central computer which is more powerful than the clients & which allows the clients to access its software & database is called as the server. Types of server: 1. File server 2. Print Sever 3. Application server 4. Message server 5. Database server

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

Define Protocol and Encapsulation.

Description : Define Protocol and Encapsulation.

Last Answer : i. Protocol: Protocol is defines as the set of rules and regulations to communicate between layers in networking. OR It is set of rules and conventions sender and receiver in data communication ... of encapsulation. OR Encapsulation is the process of adding the headers and footers to the data.

Define Wi-Max.

Description : Define Wi-Max.

Last Answer : Define: Wi- Max is worldwide interoperability for Microwave Access. It is a wireless communication standard which can provide data rates up to 1 Gbps. 

Write in brief any two roles of network control devices in computer network.

Description :  Write in brief any two roles of network control devices in computer network.

Last Answer : Two roles of network control devices in computer: Role of repeater: Generates the original signal. Operates in the physical layer. Role of Bridges: Bridges utilize the address ... Role of Gateways: Gateways provide translation services between incompatible networks and works in all layers.

Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Description : Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Last Answer : 1. Data Encryption-Presentation Layer 2. Error Correction-Data link layer and Transport layer 3. File Transfer-Application layer 4. Data Encoding-Presentation layer

Define: (i) Apparent power (ii) Real power

Description : Define: (i) Apparent power (ii) Real power

Last Answer : (i) Apparent power It is the product of rms values of applied voltage and circuit current. Unit: volt-ampere (VA) OR kilo-volt-ampere (kVA) OR Mega-volt-ampere (MVA) S = VI = I2 Z volt ... circuit. (OR) It is the power which is actually dissipated in the circuit resistance.

s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Description : s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Last Answer : B) 100 BASE-TX

Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Last Answer : B) Half-duplex

Give two features of IPv6.

Description : Give two features of IPv6. 

Last Answer : Two features of IPv6 are: An IPv6 address consists of 16 bytes (octets) It is 128 bits long. IPv6 specifies hexadecimal colon notation. Therefore, the address consists of 32 hexadecimal ... multicast. In an IPv6 address, the variable type prefix field defines the address type or purpose.

State two advantages of Mesh topology.

Description : State two advantages of Mesh topology.

Last Answer : Network Topology refers to layout of a network. Network topology specifically refers to the physical layout of the network especially the locations of the computers & how the cable is run ... to Point Connection: Point-to-point links make fault identification and fault isolation easy.

..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Description : ..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Last Answer : A) Tunnel

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Description : State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Last Answer : A) True, False

On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Description : On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Last Answer : A) SSL handshake protocol

While initiating SSL session, the client code recognizes the SSL request and establishes a connection through TCP Part.................to the SSL code on the server. A) 420 B) 1032 C) 443 D) 322

Description : While initiating SSL session, the client code recognizes the SSL request and establishes a connection through TCP Part.................to the SSL code on the server. A) 420 B) 1032 C) 443 D) 322

Last Answer : C) 443

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

In........................mode, a common technique in packet-switched networks consists of wrapping a packet in a new one. A) Tunneling B) Encapsulation C) Both A and B D) None of the above

Description : In........................mode, a common technique in packet-switched networks consists of wrapping a packet in a new one. A) Tunneling B) Encapsulation C) Both A and B D) None of the above

Last Answer : C) Both A and B

The................is used to provide integrity check, authentication and encryption to IPdatagram. A) SSL B) ESP C) TSL D) PSL

Description : The................is used to provide integrity check, authentication and encryption to IPdatagram. A) SSL B) ESP C) TSL D) PSL

Last Answer : B) ESP

The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Description : The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Last Answer : A) SSL

A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Description : A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Last Answer : B) VPN

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True

In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Description : In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Last Answer : A) Tunnel

.................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Description : .................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Last Answer : A) Tunneling

The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Last Answer : D) All of the above

Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Description : Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Last Answer : D) All of the above

A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Description : A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Last Answer : A) Chock point

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

................is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Description : ................is to protect data and passwords. A) Encryption B) Authentication C) Authorization D) Non-repudiation

Last Answer : A) Encryption

Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

A WAN typically spans a set of countries that have data ratesless than................ Mbps. A) 2 B) 1 C) 4 D) 100

Description : A WAN typically spans a set of countries that have data ratesless than................ Mbps. A) 2 B) 1 C) 4 D) 100

Last Answer : B) 1

A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Description : A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Last Answer : Bus

............. is a set of information that is exchanged between a client and web browser and a web server during an HTTP transaction. A) infoset B) clientinfo C) cookie D) transkie

Description : ............. is a set of information that is exchanged between a client and web browser and a web server during an HTTP transaction. A) infoset B) clientinfo C) cookie D) transkie

Last Answer : C) cookie

FTP server listens to connections on port ……………………. A) 19 and 20 B) 20 and 21 C) 21 and 22 D) 20 and 22

Description : FTP server listens to connections on port ……………………. A) 19 and 20 B) 20 and 21 C) 21 and 22 D) 20 and 22

Last Answer : B) 20 and 21

The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Description : The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Last Answer : B) i, and ii only

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

............ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Description : ............ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Last Answer : B) True, True

The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Description : The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Last Answer : C) Subnet number and host number.