The density of water is 1 g/cc. This is strictly valid at – (1) 0°C (2) 4°C (3) 25°C (4) 100°C

The density of water is 1 g/cc. This is strictly valid at – (1) 0°C (2) 4°C (3) 25°C (4) 100°C
by

1 Answer

Answer :

(2) 4°C Explanation: Water never has an absolute density because its density varies with temperature. Water has its maximum density of 1 g/cm3 at 4 degrees Celsius. When the temperature changes from either greater or less than 4 degrees, the density will become less than 1 g/cm3. Water has the maximum density of 1 g/cm3 only when it is pure water.
by
selected

Related questions

The density of water is 1 g/cc. This is strictly valid at (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Description : The density of water is 1 g/cc. This is strictly valid at (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Last Answer :  4°C

Water has maximum density at – (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Description : Water has maximum density at – (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Last Answer : (3) 4°C Explanation: The maximum density of water occurs at 4 °C because at. this temperature, two opposing effects are in balance. Water is an exceptional compound that has a lower density in the ... due to the ion nature of water in the liquid phase, which packs the molecules tightly together.

Water has maximum density at (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Description : Water has maximum density at (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Last Answer : 4°C

Water has maximum density at (a) Room temperature (b) 0°C (c) 4°C (d) 100°C

Description : Water has maximum density at (a) Room temperature (b) 0°C (c) 4°C (d) 100°C

Last Answer : Ans:(c)

Water has maximum density at – (1) -4°C (2) 0°C (3) 4°C (4) 100°C

Description : Water has maximum density at – (1) -4°C (2) 0°C (3) 4°C (4) 100°C

Last Answer : (3) 4°C Explanation: When cooled from room temperature liquid water becomes increasingly dense, as with other substances, but at approximately 4 °C (39 °F), pure water reaches its maximum density.

Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Description : Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Last Answer : (b) 4°C

Density of water is 1G/CC. it is strictly valid at –

Description : Density of water is 1G/CC. it is strictly valid at –

Last Answer : 40C

Specific gravity is defined as the ratio of – (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Description : Specific gravity is defined as the ratio of – (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Last Answer : (1) density of the substance to the density of water Explanation: Specific gravity is the ratio of the density of a substance to the density (mass of the same unit volume) of a reference substance. The reference substance is nearly always water for liquids or air for gases.

Specific gravity is defined as the ratio of (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Description : Specific gravity is defined as the ratio of (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Last Answer : density of the substance to the density of water

Water has maximum density at _____? A. 0°C B. 4°c C. 40K D. 4.8°C

Description : Water has maximum density at _____? A. 0°C B. 4°c C. 40K D. 4.8°C

Last Answer : ANSWER: B

What happens when water is cooled from 8°C to 0°C? 1. Its volume decreases uniformly, becoming minimum at 0°C. 2. Its density increases uniformly, attaining maximum value at 0°C. 3. Its volume decreases up to 4°C and then increases 4. Its density increases up to 4°C and then decreases. Which of the above answers is/are correct? (a) Only 1 (b) Only 2 (c) 3 and 4 (d) 1 and 2

Description : What happens when water is cooled from 8°C to 0°C? 1. Its volume decreases uniformly, becoming minimum at 0°C. 2. Its density increases uniformly, attaining maximum value at 0°C. 3. Its volume decreases up to 4°C and then increases ... is/are correct? (a) Only 1 (b) Only 2 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(c)

At what temperature is the density of water the maximum? (1) 2°C (2) 4°C (3) 0°C (4) 1°C

Description : At what temperature is the density of water the maximum? (1) 2°C (2) 4°C (3) 0°C (4) 1°C

Last Answer : (2) 4°C Explanation: An especially notable irregular maximum density is that of water, which reaches a density peak at 3.98 °C (39.16 °F).

Water has maximum density at------? A. 0°C B. 4°C (Answer) C. 4° K D. 4.8°C

Description : Water has maximum density at------? A. 0°C B. 4°C (Answer) C. 4° K D. 4.8°C

Last Answer : B. 4°C (Answer)

The freezing point of fresh water is - (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Description : The freezing point of fresh water is - (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Last Answer : (4) 0°C Explanation: The freezing point of water is the temperature at which water changes phase from a liquid to a solid. Under normal conditions, ordinary water freezes at 0°C, or 32°F. ... or if there are impurities present in the water which could cause freezing point depression to occur.

Lakes freeze in cold countries in winter, leaving the water underneath at – (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Description : Lakes freeze in cold countries in winter, leaving the water underneath at – (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Last Answer : (3) 4°C Explanation: Lake ice cover is seasonal and occurs where average daily temperature is below the freezing point. Once formed the lake ice thickens over the course of the winter as the temperature ... 0 (zero) degrees Celsius water at the surface and denser 4 degrees Celsius at the bottom.

The freezing point of fresh water is _______. (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Description : The freezing point of fresh water is _______. (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Last Answer : 0°C

Lakes freeze in cold countries in winter, leaving the water underneath at (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Description : Lakes freeze in cold countries in winter, leaving the water underneath at (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Last Answer : 4°C

The pH of water at 25°C is 7. When it is heated to 100°C, then what will be the pH of water?

Description : The pH of water at 25°C is 7. When it is heated to 100°C, then what will be the pH of water?

Last Answer : – Remains same

When heated from 0°C to 100°C volume of a given mass of water will – (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will Increase

Description : When heated from 0°C to 100°C volume of a given mass of water will – (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will Increase

Last Answer : (4) Decrease and then will Increase Explanation: When heated from 00 to 100 C volume of a given mass of water will first decrease and then increase. If the word "ice" or "solid" is not mentioned, the word "water" means liquid water.

Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : (3) the humidity is 100% Explanation: If the relative humidity is 100 percent, water will not evaporate as the air is already saturated with moisture. When relative humidity approaches 100 percent, condensation can occur. The lower the relative humidity, the easier it is for moisture to evaporate.

Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : the humidity is 100% 

0°K, is equivalent to – (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Description : 0°K, is equivalent to – (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Last Answer : (2) -273°C Explanation: 0 degrees Kelvin is equal to - 273.15 degrees Celsius. It is the lowest possible temperature, at which all molecules are have the least possible amount of kinetic energy.

0°K is equivalent to (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Description : 0°K is equivalent to (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Last Answer : (2) -273°C Explanation: 0 degrees Kelvin is equal to - 273.15 degrees Celsius. It is the lowest possible temperature, at which all molecules are have the least possible amount of kinetic energy.

0°K is equivalent to (1) 273°C (2) – 273°C (3) 0°C (4) 100°C

Description : 0°K is equivalent to (1) 273°C (2) – 273°C (3) 0°C (4) 100°C

Last Answer :  – 273°C

A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Description : A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Last Answer : Ans: D

The temperature of the top of a frozen lake is – 15°C. What is the temperature of the water in the lake in contact with the ice layer? (a) 0°C (b) 4°C (c) –15°C (d) –7.5°C

Description : The temperature of the top of a frozen lake is – 15°C. What is the temperature of the water in the lake in contact with the ice layer? (a) 0°C (b) 4°C (c) –15°C (d) –7.5°C

Last Answer : Ans:(a)

The freezing point of fresh water is - (1) 0°C (2) 4°C (3) 3°C (4) 5 C

Description : The freezing point of fresh water is - (1) 0°C (2) 4°C (3) 3°C (4) 5 C

Last Answer : (1) 0°C Explanation: Ocean water freezes just like freshwater, but at lower temperatures. Fresh water freezes at 32 degrees Fahrenheit but seawater freezes at about 28.4 degrees Fahrenheit, because of the salt in it.

Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Description : Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Last Answer : Answer : C

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C

Description : 5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm Hg (b) Tapwater at zero DO, 0°C and 700 mm Hg (c) Tapwater at zero DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Description : The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm ... DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Last Answer : (c) Tapwater at zero DO, 20°C and 760 mm Hg

The temperature condition for storage of drug products under cold temperature is given as : (A) temperature between 8°C and 25°C (B) temperature below 20 C (C) temperature at 0°C (D) temperature between 2c C and S: C

Description : The temperature condition for storage of drug products under cold temperature is given as : (A) temperature between 8°C and 25°C (B) temperature below 20 C (C) temperature at 0°C (D) temperature between 2c C and S: C

Last Answer : (D) temperature between 2c C and S: C

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

. Radiation energy is emitted by all the substances, which are above (A) 0°K (B) 0°C (C) 100°C (D) Room temperature

Description : . Radiation energy is emitted by all the substances, which are above (A) 0°K (B) 0°C (C) 100°C (D) Room temperature

Last Answer : (A) 0°K

The kinetic energy of gas molecule is zero at (A) 0°C (B) 273°C (C) 100°C (D) -273°C

Description : The kinetic energy of gas molecule is zero at (A) 0°C (B) 273°C (C) 100°C (D) -273°C

Last Answer : D) -273°C

If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Last Answer : (A) 0.375

Metal (M) crystallizes in a cubic unit cell with density 3.2 g/cc. Edge-length of the unit cell is `4.37Å` picometre (pm) The number of nearest neighb

Description : Metal (M) crystallizes in a cubic unit cell with density 3.2 g/cc. Edge-length of the unit cell is `4.37Å` picometre (pm) The number of nearest neighb

Last Answer : Metal (M) crystallizes in a cubic unit cell with density 3.2 g/cc. Edge-length of the unit cell is `4.37Å` ... Ca atom are A. 4 B. 6 C. 8 D. 12

Metal (M) crystallizes in a cubic unit cell with density 3.2 g/cc. Edge-length of the unit cell is `4.37Å` picometre (pm) The nearest neighbour will b

Description : Metal (M) crystallizes in a cubic unit cell with density 3.2 g/cc. Edge-length of the unit cell is `4.37Å` picometre (pm) The nearest neighbour will b

Last Answer : Metal (M) crystallizes in a cubic unit cell with density 3.2 g/cc. Edge-length of the unit ... diagonal C. On the face diagonal D. On opposite face

40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 m higher level than the ship in half an hour.

Description : 40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 m higher level than the ship in half an hour.

Last Answer : 40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 ... an hour. What should be the power of the pump?

A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Description : A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Last Answer : (D) 84 %

The density of water at 4°C is  a. 1 gm/cm³  b. 2 gm/cm³  c. 3 gm/cm³  d. 4 gm/cm³

Description : The density of water at 4°C is  a. 1 gm/cm³  b. 2 gm/cm³  c. 3 gm/cm³  d. 4 gm/cm³

Last Answer : 1 gm/cm³

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Description : When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Last Answer : (4) first decreases and then increases

A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80

Description : A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80

Last Answer : (C) 0.75

For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled = 850 g water filled in pycnometer up to top The specific gravity of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Description : For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled ... of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Last Answer : (C) 2.50

A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option B

How much mechanical work must be done to completely melt 1 gram of ice at 0°C? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Description : How much mechanical work must be done to completely melt 1 gram of ice at 0°C? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Last Answer : (2) 80 J Explanation: When water at 0 degree Celsius freezes, each gram of water gives off 80 calories. The temperature of the water stays at 0 degree C until every drop has frozen. When ... heat-80 calories for each gram of ice-and its temperature remains unchanged until it has completely melted.