Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C
by

1 Answer

Answer :

the humidity is 100% 
by

Related questions

Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : (3) the humidity is 100% Explanation: If the relative humidity is 100 percent, water will not evaporate as the air is already saturated with moisture. When relative humidity approaches 100 percent, condensation can occur. The lower the relative humidity, the easier it is for moisture to evaporate.

When the dew point temperature is equal to the air temperature then the relative humidity is A. 0% B. 50% C. 100% D. unpredictable

Description : When the dew point temperature is equal to the air temperature then the relative humidity is A. 0% B. 50% C. 100% D. unpredictable

Last Answer : ANSWER : C

When the rate of evaporation of water is zero, the relative humidity of the air is A. 0% B. 100% C. 50% D. unpredictable

Description : When the rate of evaporation of water is zero, the relative humidity of the air is A. 0% B. 100% C. 50% D. unpredictable

Last Answer : ANSWER : B

What is the relative humidity for a saturated air? A. 0% B. 50% C. 100% D. cannot say

Description : What is the relative humidity for a saturated air? A. 0% B. 50% C. 100% D. cannot say

Last Answer : ANSWER : C

When heated from 0°C to 100°C volume of a given mass of water will – (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will Increase

Description : When heated from 0°C to 100°C volume of a given mass of water will – (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will Increase

Last Answer : (4) Decrease and then will Increase Explanation: When heated from 00 to 100 C volume of a given mass of water will first decrease and then increase. If the word "ice" or "solid" is not mentioned, the word "water" means liquid water.

Water has maximum density at – (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Description : Water has maximum density at – (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Last Answer : (3) 4°C Explanation: The maximum density of water occurs at 4 °C because at. this temperature, two opposing effects are in balance. Water is an exceptional compound that has a lower density in the ... due to the ion nature of water in the liquid phase, which packs the molecules tightly together.

The density of water is 1 g/cc. This is strictly valid at – (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Description : The density of water is 1 g/cc. This is strictly valid at – (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Last Answer : (2) 4°C Explanation: Water never has an absolute density because its density varies with temperature. Water has its maximum density of 1 g/cm3 at 4 degrees Celsius. When the temperature changes from either greater or ... 1 g/cm3. Water has the maximum density of 1 g/cm3 only when it is pure water.

Water has maximum density at (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Description : Water has maximum density at (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Last Answer : 4°C

The density of water is 1 g/cc. This is strictly valid at (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Description : The density of water is 1 g/cc. This is strictly valid at (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Last Answer :  4°C

0°K, is equivalent to – (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Description : 0°K, is equivalent to – (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Last Answer : (2) -273°C Explanation: 0 degrees Kelvin is equal to - 273.15 degrees Celsius. It is the lowest possible temperature, at which all molecules are have the least possible amount of kinetic energy.

0°K is equivalent to (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Description : 0°K is equivalent to (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Last Answer : (2) -273°C Explanation: 0 degrees Kelvin is equal to - 273.15 degrees Celsius. It is the lowest possible temperature, at which all molecules are have the least possible amount of kinetic energy.

0°K is equivalent to (1) 273°C (2) – 273°C (3) 0°C (4) 100°C

Description : 0°K is equivalent to (1) 273°C (2) – 273°C (3) 0°C (4) 100°C

Last Answer :  – 273°C

Water has maximum density at (a) Room temperature (b) 0°C (c) 4°C (d) 100°C

Description : Water has maximum density at (a) Room temperature (b) 0°C (c) 4°C (d) 100°C

Last Answer : Ans:(c)

. Radiation energy is emitted by all the substances, which are above (A) 0°K (B) 0°C (C) 100°C (D) Room temperature

Description : . Radiation energy is emitted by all the substances, which are above (A) 0°K (B) 0°C (C) 100°C (D) Room temperature

Last Answer : (A) 0°K

Water has maximum density at – (1) -4°C (2) 0°C (3) 4°C (4) 100°C

Description : Water has maximum density at – (1) -4°C (2) 0°C (3) 4°C (4) 100°C

Last Answer : (3) 4°C Explanation: When cooled from room temperature liquid water becomes increasingly dense, as with other substances, but at approximately 4 °C (39 °F), pure water reaches its maximum density.

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Description : Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Last Answer : (b) 4°C

The kinetic energy of gas molecule is zero at (A) 0°C (B) 273°C (C) 100°C (D) -273°C

Description : The kinetic energy of gas molecule is zero at (A) 0°C (B) 273°C (C) 100°C (D) -273°C

Last Answer : D) -273°C

A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated

In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Description : In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Last Answer : B. 0% modulation

f there are two identical products, one that has 100% accessibility and one that has 0% accessibility, a. the one with 0% accessibility will not sell at all because consumers can’t find it. b. the product with 100% accessibility will outsell the other 2 to 1 providing all other attributes are identical. c. the one with 0% accessibility will not sell at all because consumers do not know of it. d. the product with 0% accessibility will only sell after all other products have sold in that segment. e. the product with 100% accessibility will outsell the other 3 to 1 providing all other attributes are identical.

Description : f there are two identical products, one that has 100% accessibility and one that has 0% accessibility, a. the one with 0% accessibility will not sell at all because consumers can't find ... product with 100% accessibility will outsell the other 3 to 1 providing all other attributes are identical.

Last Answer : b. the product with 100% accessibility will outsell the other 2 to 1 providing all other attributes are identical.

4. A haemophilic man marries a normal homozygous woman. What is the probability that their son will be haemophilic a) 100% b) 75 % c) 50% d) 0%

Description : 4. A haemophilic man marries a normal homozygous woman. What is the probability that their son will be haemophilic a) 100% b) 75 % c) 50% d) 0%

Last Answer : d) 0%

When dew point la reached it is said that at that temperature (a) the atmosphere is said to be saturated with water vapour (b) the relative humidity of the atmosphere is 100% (c) the atmosphere can hold no more water vapour (d) All the above

Description : When dew point la reached it is said that at that temperature (a) the atmosphere is said to be saturated with water vapour (b) the relative humidity of the atmosphere is 100% (c) the atmosphere can hold no more water vapour (d) All the above

Last Answer : Ans: (a)

Wet-bulb temperature is: a. The temperature indicated by a thermometer whose bulb covered by a water-wetted wick and exposed to a rapidly moving stream of air b. The same as the dry-bulb temperature if the relative humidity is less than 100% c. The dew point temperature d. Always less than the dry-bulb temperature e. Not required to find the relative humidity

Description : Wet-bulb temperature is: a. The temperature indicated by a thermometer whose bulb covered by a water-wetted wick and exposed to a rapidly moving stream of air b. The same as the dry-bulb ... point temperature d. Always less than the dry-bulb temperature e. Not required to find the relative humidity

Last Answer : Answer: A

When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew point temperature of air has not reached (C) Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Description : When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew ... Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Last Answer : (D) Air is fully saturated

Dry-bulb temperature is: a. The absolute temperature corresponding to the atmospheric pressure b. The same as the wet-bulb temperature if the relative humidity is less than 100% c. Not required to find the relative humidity d. The temperature of the air measured with an ordinary thermometer e. The dew point temperature

Description : Dry-bulb temperature is: a. The absolute temperature corresponding to the atmospheric pressure b. The same as the wet-bulb temperature if the relative humidity is less than 100% c. Not required ... d. The temperature of the air measured with an ordinary thermometer e. The dew point temperature

Last Answer : Answer: D

At 100% relative humidity, the wet bulb temperature is A. lower than the dew point temperature B. higher than the dew point temperature C. equal to the dew point temperature D. none of the above

Description : At 100% relative humidity, the wet bulb temperature is A. lower than the dew point temperature B. higher than the dew point temperature C. equal to the dew point temperature D. none of the above

Last Answer : ANSWER : C

If atmospheric temperature and dew point are nearly equal, then the relative humidity is (A) Zero (B) 50% (C) Almost 100% (D) unpredictable

Description : If atmospheric temperature and dew point are nearly equal, then the relative humidity is (A) Zero (B) 50% (C) Almost 100% (D) unpredictable

Last Answer : (C) Almost 100%

At 100% relative humidity, the dew point temperature of moist air is (A) Less than the wet bulb temperature (B) More than the wet bulb temperature (C) Equal to the wet bulb temperature (D) Equal to the ambient temperature

Description : At 100% relative humidity, the dew point temperature of moist air is (A) Less than the wet bulb temperature (B) More than the wet bulb temperature (C) Equal to the wet bulb temperature (D) Equal to the ambient temperature

Last Answer : (B) More than the wet bulb temperature

The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) Wet bulb temperature=dew point temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Description : The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) ... temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Last Answer : Option D

What happens when Humidity reaches 100%?

Description : What happens when Humidity reaches 100%?

Last Answer : Isn’t that called “rain”?

The average humidity percentage recommended for interior plants is: a. 70 to 100% b. 40 to 70% c. 20 to 30% d. 10 to 20%86.

Description : The average humidity percentage recommended for interior plants is: a. 70 to 100% b. 40 to 70% c. 20 to 30% d. 10 to 20%86.

Last Answer : 40 to 70%

The pH of water at 25°C is 7. When it is heated to 100°C, then what will be the pH of water?

Description : The pH of water at 25°C is 7. When it is heated to 100°C, then what will be the pH of water?

Last Answer : – Remains same

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Specific gravity is defined as the ratio of – (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Description : Specific gravity is defined as the ratio of – (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Last Answer : (1) density of the substance to the density of water Explanation: Specific gravity is the ratio of the density of a substance to the density (mass of the same unit volume) of a reference substance. The reference substance is nearly always water for liquids or air for gases.

The freezing point of fresh water is - (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Description : The freezing point of fresh water is - (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Last Answer : (4) 0°C Explanation: The freezing point of water is the temperature at which water changes phase from a liquid to a solid. Under normal conditions, ordinary water freezes at 0°C, or 32°F. ... or if there are impurities present in the water which could cause freezing point depression to occur.

When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Description : When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Last Answer : (4) first decreases and then increases

Lakes freeze in cold countries in winter, leaving the water underneath at – (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Description : Lakes freeze in cold countries in winter, leaving the water underneath at – (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Last Answer : (3) 4°C Explanation: Lake ice cover is seasonal and occurs where average daily temperature is below the freezing point. Once formed the lake ice thickens over the course of the winter as the temperature ... 0 (zero) degrees Celsius water at the surface and denser 4 degrees Celsius at the bottom.

The freezing point of fresh water is _______. (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Description : The freezing point of fresh water is _______. (1) 4°C (2) 3°C (3) 5°C (4) 0°C

Last Answer : 0°C

Specific gravity is defined as the ratio of (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Description : Specific gravity is defined as the ratio of (1) density of the substance to the density of water (2) density of the substance to the density of water at 0°C (3) density of water at 4°C to the density of the substance (4) density of the substance to the density of water at 4°C

Last Answer : density of the substance to the density of water

Lakes freeze in cold countries in winter, leaving the water underneath at (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Description : Lakes freeze in cold countries in winter, leaving the water underneath at (1) 0°C (2) 0°F (3) 4°C (4) 4°F

Last Answer : 4°C

steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Description : steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Last Answer : (C) Product must be immiscible with water

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

The boiling temperature of the water in the radiator is raised to abouta) 100°C b) 105°C c) 110° C d) 115° C

Description : The boiling temperature of the water in the radiator is raised to abouta) 100°C b) 105°C c) 110° C d) 115° C

Last Answer : c) 110° C

Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Description : Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Last Answer : (B) 80°C

How much mechanical work must be done to completely melt 1 gram of ice at 0°C? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Description : How much mechanical work must be done to completely melt 1 gram of ice at 0°C? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Last Answer : (2) 80 J Explanation: When water at 0 degree Celsius freezes, each gram of water gives off 80 calories. The temperature of the water stays at 0 degree C until every drop has frozen. When ... heat-80 calories for each gram of ice-and its temperature remains unchanged until it has completely melted.

How much mechanical work must be done to completely melt 1 gram of ice at 0°C ? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Description : How much mechanical work must be done to completely melt 1 gram of ice at 0°C ? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Last Answer : 80 J

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25