The pH of water at 25°C is 7. When it is heated to 100°C, then what will be the pH of water?

The pH of water at 25°C is 7. When it is heated to 100°C, then what will be the pH of water?
by

1 Answer

Answer :

– Remains same
by
selected

Related questions

The density of water is 1 g/cc. This is strictly valid at – (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Description : The density of water is 1 g/cc. This is strictly valid at – (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Last Answer : (2) 4°C Explanation: Water never has an absolute density because its density varies with temperature. Water has its maximum density of 1 g/cm3 at 4 degrees Celsius. When the temperature changes from either greater or ... 1 g/cm3. Water has the maximum density of 1 g/cm3 only when it is pure water.

The density of water is 1 g/cc. This is strictly valid at (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Description : The density of water is 1 g/cc. This is strictly valid at (1) 0°C (2) 4°C (3) 25°C (4) 100°C

Last Answer :  4°C

When heated from 0°C to 100°C volume of a given mass of water will – (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will Increase

Description : When heated from 0°C to 100°C volume of a given mass of water will – (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will Increase

Last Answer : (4) Decrease and then will Increase Explanation: When heated from 00 to 100 C volume of a given mass of water will first decrease and then increase. If the word "ice" or "solid" is not mentioned, the word "water" means liquid water.

Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Description : Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Last Answer : Answer : C

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

The pH of water at 25°C is 7.

Description : The pH of water at 25°C is 7.

Last Answer : Remains same

The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Description : The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Last Answer : (B) > 25

At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Description : At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Last Answer : b) 100°C

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Water has maximum density at – (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Description : Water has maximum density at – (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Last Answer : (3) 4°C Explanation: The maximum density of water occurs at 4 °C because at. this temperature, two opposing effects are in balance. Water is an exceptional compound that has a lower density in the ... due to the ion nature of water in the liquid phase, which packs the molecules tightly together.

Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vaporized if – (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : (3) the humidity is 100% Explanation: If the relative humidity is 100 percent, water will not evaporate as the air is already saturated with moisture. When relative humidity approaches 100 percent, condensation can occur. The lower the relative humidity, the easier it is for moisture to evaporate.

Water has maximum density at (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Description : Water has maximum density at (1) 100°C (2) 0°C (3) 4°C (4) 273°C

Last Answer : 4°C

Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Description : Water will not be vapourised if (1) the temperature is 0°C (2) the humidity is 0% (3) the humidity is 100% (4) the temperature is 100°C

Last Answer : the humidity is 100% 

0°K, is equivalent to – (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Description : 0°K, is equivalent to – (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Last Answer : (2) -273°C Explanation: 0 degrees Kelvin is equal to - 273.15 degrees Celsius. It is the lowest possible temperature, at which all molecules are have the least possible amount of kinetic energy.

0°K is equivalent to (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Description : 0°K is equivalent to (1) 273°C (2) -273°C (3) 0°C (4) 100°C

Last Answer : (2) -273°C Explanation: 0 degrees Kelvin is equal to - 273.15 degrees Celsius. It is the lowest possible temperature, at which all molecules are have the least possible amount of kinetic energy.

0°K is equivalent to (1) 273°C (2) – 273°C (3) 0°C (4) 100°C

Description : 0°K is equivalent to (1) 273°C (2) – 273°C (3) 0°C (4) 100°C

Last Answer :  – 273°C

A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Last Answer : (D) 18.7

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Description : When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Last Answer : (4) first decreases and then increases

When heated from 00 to 100C volume of a given mass of water will : (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will increase

Description : When heated from 00 to 100C volume of a given mass of water will : (1) Increase gradually (2) Decrease gradually (3) Increase and then will decrease (4) Decrease and then will increase

Last Answer : Decrease and then will increase

The surface tension of water is at 25°C

Description : The surface tension of water is at 25°C

Last Answer : Ans. 72.7 dyne/cm2

1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Description : 1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Last Answer : (C) 0.2

The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025

Description : The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025

Last Answer : (A) 0.25

Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) Humidified with wet bulb temperature decreasingB) Humidified at constant wet bulb temperature(C) Dehumidified(D) None of these

Description : Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) ... temperature decreasing B) Humidified at constant wet bulb temperature (C) Dehumidified (D) None of these

Last Answer : (A) Humidified with wet bulb temperature decreasing

Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Description : Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Last Answer : (B) Humidified

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole? (1) Increase (2) Decrease (3) Remain constant (4) Will increase first and then decrease

Description : A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole? (1) Increase (2) Decrease (3) Remain constant (4) Will increase first and then decrease

Last Answer : (1) Increase Explanation: Assuming the disc is uniform and isotropic (the same in different directions), the hole will expand in the same ratio as the metal. It is because the thermal expansion equation ... is made out of metal. And if the circumference of the hole expands, so does the diameter.

A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole ? (1) Increase (2) Dacrease (3) Remain constant (4) Will increase first and then dcrease

Description : A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole ? (1) Increase (2) Dacrease (3) Remain constant (4) Will increase first and then dcrease

Last Answer : Increase

A temperature difference of 25°C is equivalent to a temperature difference of howmany F? -Do You Know?

Description : A temperature difference of 25°C is equivalent to a temperature difference of howmany F? -Do You Know?

Last Answer : answer:

At 25°C and 760 mm of Hg pressure a gas occupies 600 mL volume.

Description : At 25°C and 760 mm of Hg pressure a gas occupies 600 mL volume.

Last Answer : At 25°C and 760 mm of Hg pressure a gas occupies 600 mL volume. What will be its pressure at ... temperature is 10°C and volume of the gas 640 mL ?

If two temperatures differ by 25°C on Celsius scale, the difference in temperature on Fahrenheit scale is

Description : If two temperatures differ by 25°C on Celsius scale, the difference in temperature on Fahrenheit scale is

Last Answer : If two temperatures differ by 25°C on Celsius scale, the difference in temperature on Fahrenheit scale is (A) 65° (B) 45° (C) 38° (D) 25°

The two elements that exist as liquids at 25°C are (a) Mercury and lithium (b) Mercury and caesium (c) Bromine and mercury (d) Mercury and argon

Description : The two elements that exist as liquids at 25°C are (a) Mercury and lithium (b) Mercury and caesium (c) Bromine and mercury (d) Mercury and argon

Last Answer : Ans:(c)

The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Description : The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C

Description : 5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher dielectric strength than number 12 AWG wire. C. Number 12 AWG wire is larger than Number 10 AWG wire. D. Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Description : Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher ... Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Last Answer : Answer: D

Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more resistance per 1000 ft than 10 AWG wire at 25°C. C. Number 10 AWG wire has a higher dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Description : Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more ... dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Last Answer : Answer: B

A temperature difference of 25°C is equivalent to a temperature difference of howmany F?

Description : A temperature difference of 25°C is equivalent to a temperature difference of howmany F?

Last Answer : 45° F

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Description : Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Last Answer : 25°C

High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Description : High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Last Answer : 20-25°C

Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Description : Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Last Answer : 20-22°C

Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Description : Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Last Answer : (b) 20-25°C

The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Description : The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Last Answer : 1) 20°C – 25°C

Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% E. A shady place F. A brightly illuminated place Choose the answer from the following options. (a) B, C and F only (b) A, C and E only (c) A, D and E only (d) B, D and E only

Description : Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% ... b) A, C and E only (c) A, D and E only (d) B, D and E only

Last Answer : (c) A, D and E only

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m